ABB AI835A
Modules and Termination Units
Genuine surplus ABB AI835A thermocouple input module — 8 differential channels, 15-bit, verified condition and ready to ship.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Article number | 3BSE051306R1 |
|---|---|
| Number of channels | 8 differential |
| Signal specification | -30..75 mV linear; TC types B, C, D, E, J, K, L, N, R, S, T and U |
| Resolution | 15 bits |
| Input impedance | > 1 MΩ |
| Isolation | Groupwise isolated from ground |
| Maximum field cable length | 600 meters (656 yards) |
| Power dissipation | 1.6 W |
| Operating temperature | 0 to +55 °C (+32 to +131 °F) |
| Protection class | IP20 according to IEC 60529 |
Description
When thermocouple channels drop out on a running process, every hour of unplanned downtime compounds. The ABB AI835A is an S800 analog input module with eight differential channels for thermocouple and mV measurement, and sourcing a genuine unit fast matters. Autronexa supplies verified surplus and refurbished units, tested and ready to ship.
What This Module Solves on the Plant Floor
The AI835A addresses a common engineering pain point: mixed thermocouple types on a single card. It accepts B, C, E, J, K, N, R, S and T thermocouples, plus D, L and U types on this unit variant. Each channel is configurable for -30 to +75 mV linear or direct thermocouple measurement, so one module covers the whole temperature profile of a process area instead of multiple card types.
Channel 8 can be designated as the cold-junction channel, serving channels 1 through 7. Junction temperature can be measured at the MTU screw terminals or at a remote connection unit, and a fixed junction temperature can be set as a parameter or, on this variant, from the application. When no CJ measurement is needed, channel 8 works as a standard input.

Technical Specs Breakdown
Resolution is 15 bits with input impedance above 1 MΩ, giving stable readings on low-level mV signals. Groupwise isolation from ground and a common-mode rejection ratio of 120 dB at 50 and 60 Hz keep measurement clean in electrically noisy cabinets. Maximum field cable length reaches 600 meters, useful where thermocouples sit far from the I/O rack.
Diagnostics cover wire-break open-circuit detection per channel, plus module supervision for reference channel and low power supply faults. Three front LEDs report fault, run and warning status. The module carries CE marking, ATEX Zone 2 and C1 Div 2 cULus hazardous-location approvals, and marine certification from ABS, BV, DNV and LR. Operating temperature is 0 to +55 °C, with approvals issued for +5 to +55 °C.

Surplus Advantage for This Module
This unit pairs with MTUs TU810, TU812, TU814, TU818, TU830 and TU833, keying code BA. Because the module and termination unit are sourced separately, a failed card often leaves a working MTU in place — replacing only the module keeps the wiring intact and the loop short. Autronexa stocks genuine surplus and refurbished units tested against OEM datasheet specifications and functionally verified by our sourcing team, which typically beats OEM lead time on discontinued S800 lines. Contact Autronexa with your part number for verified condition and current availability.
Frequently asked questions
Is this a genuine ABB AI835A, or a clone?
Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The article number 3BSE051306R1 is checked on the label and the unit is functionally tested.
What condition will the AI835A arrive in?
Units ship in the site default condition, Refurbished — tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a surplus (unrefurbished) unit instead.
How fast can you ship the AI835A?
Lead time depends on current stock. Contact Autronexa for current lead time and availability before ordering.
Which termination units work with this module?
The AI835A is compatible with MTUs TU810, TU812, TU814, TU818, TU830 and TU833, keying code BA. Confirm your existing MTU model before ordering.
Is the AI835A still supported by ABB?
Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability.
Related & compatible parts
ABB
AX522
Genuine surplus ABB AX522 analog I/O module — 8 AI, 8 AO, 12-bit, verified and ready to ship…
ABB
07KT93
Genuine surplus ABB 07KT93 processor set with a 10 kHz high-speed counter — verified condition, practical sourcing support…
ABB
TU849
Genuine surplus ABB TU849 termination unit for redundant TB840/TB840A modem pairs — verified condition, practical sourcing support.
ABB
3HAC038457-002
Genuine surplus ABB Weldguide III Advanced (3HAC038457-002) — verified, refurbished-ready, with clear lead times from Autronexa.
News & guides for ABB
ABB Buys Rotork: What the $5.5B Deal Means for Actuator Spares
ABB's $5.5 billion cash offer for Rotork, part-funded by the SoftBank robotics divestment, moves the group deeper into mission-critical flow…
Emerson Q4 FY2026: LNG Sales Up 68%, Semiconductor Up 43%, Software ACV at $1.7B
Emerson closed FY2026 with 7% sales growth and 14% underlying order growth. We verify what the 68% LNG, 43% semiconductor,…
Siemens MIS: A Specification Walkthrough for the Pre-Engineered Microgrid Switchboard
Siemens MIS published ratings, one-line interface responsibilities, UL 891 and UL 3141 scope, and what factory testing does and does…
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Nexans 700 VDC Microgrid: What Changes for Factories and Spares
Nexans has switched part of its own AmpaCity global innovation hub in Lyon, France, onto a 700 V direct-current main distribution…
Orbit 60 PPM (142M8515): What the Module Does and What the 90% Load Warning Means
TL;DR: The Bently Nevada Orbit 60 Protection Processing Module (PPM) is the centralized compute engine of the protection system: it…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
