ABB I/O & Function Modules

ABB DI818

Digital Input Module

Manufacturer: ABB Part Number: DI818

Genuine surplus ABB DI818 digital input module — 32 channels, 24 V d.c., two isolated groups. Verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article number 3BSE069052R1
Number of channels 32
Signal type Current sinking
Input voltage range, "0" -30 .. +5 V
Input voltage range, "1" 11 .. 30 V
Input impedance 5.6 kΩ
Isolation Groupwise isolated from ground, groups of 16 channels
Filter times (selectable) 2, 4, 8, 16 ms
Power dissipation Typ. 3.1 W
Operating temperature 0 to +55 °C (+32 to +131 °F)

Description

When a digital input module fails, every hour of downtime adds cost. The ABB DI818 digital input module delivers 32 channels for 24 V d.c. current-sinking signals, split into two isolated groups of 16 with voltage supervision. Autronexa supplies genuine surplus and refurbished units, verified against OEM datasheet markings and functionally tested, so you get a practical replacement without OEM lead times.

What This Module Solves in an S800 System

The DI818 addresses a common integration pain point: dense field-signal acquisition without sacrificing diagnostic visibility. Each input channel includes current-limiting components, EMC protection, an input state LED, and an optical isolation barrier. The two groups are individually isolated from ground, and each carries one process voltage supervision input. If process voltage disappears, the module generates a channel error signal readable via ModuleBus. Filter times are selectable at 2, 4, 8, or 16 ms, letting you tune response to noisy field conditions. The module fits S800 mechanics and pairs with MTU types TU818, TU819, or TU830. Keying code EA helps prevent incorrect MTU mating.

Figure 1: Front view of the ABB DI818 Digital Input Module showing its physical design and enclosure.

Surplus Advantage: Verified Stock vs. OEM Wait

For a module this specific, OEM lead time can stall a maintenance window. Autronexa keeps genuine surplus and refurbished ABB S800 components in stock, and every unit is checked against OEM datasheet specifications and functionally verified by our sourcing team. That means you get a part with known condition, not an unknown-history pull. This unit is rated for 0 to +55 °C operating, with approvals issued for +5 to +55 °C, and carries CE marking plus marine certifications from ABS, BV, DNV, and LR. Corrosion protection meets ISA-S71.04: G3, and RoHS compliance follows DIRECTIVE/2011/65/EU. For buyers replacing a failed input card, surplus stock often shortens the path from diagnosis to restart.

Figure 2: Technical layout and connection details for the ABB DI818 Digital Input Module.

Selection and Sourcing Guide

Before ordering, confirm your existing MTU type — TU818, TU819, and TU830 are the listed matches — and verify the keying code EA on the carrier. Check whether your application needs the full 32 channels or if a partial population is acceptable; this module provides all 32. Confirm the input voltage range suits your field devices: “0” is -30 to +5 V and “1” is 11 to 30 V. Also review the maximum field cable length of 600 meters (656 yards) against your installation layout. Autronexa can help cross-reference your current part number and confirm compatibility. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DI818, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. This is a genuine ABB module, not a copy.

What condition will the DI818 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — contact us for current stock.

How fast can you ship the DI818?

Lead time depends on current stock. Contact Autronexa for verified availability and shipping options.

Does the DI818 work with my existing MTU?

The DI818 is listed for use with MTU types TU818, TU819, and TU830. Confirm your MTU model and keying code EA before ordering.

Is the DI818 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and availability.

Related & compatible parts

ABB

DI801

Genuine surplus ABB DI801 digital input module — 16 channels, 24 V d.c., S800 I/O. Verified condition, tested,…

In Stock

ABB

AI910S

Genuine surplus ABB AI910S analog input module for S900 I/O — 4-channel 4...20 mA, ATEX Zone 1, verified…

In Stock

ABB

CI858

Genuine surplus ABB CI858 DriveBus interface for AC 800M — verified, tested, and ready to ship with clear…

In Stock

ABB

DI524

Genuine surplus ABB DI524 S500 digital input module — 32 DI at 24VDC, verified condition and faster lead…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DI818

We reply within one business day.

DI818 Quote reply within 1 business day