ABB I/O & Function Modules

ABB V18345-1010261001

Valve Positioner

Manufacturer: ABB Part Number: V18345-1010261001

Genuine surplus ABB TZIDC valve positioner, 4–20 mA two-wire, IP65 aluminum case, fail-safe single acting — verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Input signal 4...20 mA, two-wire with connector plug for LKS adapter
Output / safe position Single acting, fail safe
Housing material / protection Aluminum, IP 65 / NEMA 4X
Supply pressure 1.4 ... 6 bar (20 ... 90 psi)
Air consumption < 0.03 kg/h / 0.015 scfm (independent of supply pressure)
Pneumatic connections Threads G 1/4 or 1/4-18 NPT
Cable entry Thread M20 x 1.5
Weight 1.7 Kg
Position feedback Plug-in module analog position feedback (4 ... 20 mA)

Description

When a control valve loses its positioner, the loop goes manual and production suffers. The ABB V18345-1010261001 TZIDC valve positioner restores precise 4–20 mA two-wire control with a fail-safe single-acting output, and Autronexa supplies it as a genuine surplus or refurbished unit — verified against OEM datasheet markings and functionally tested, so you avoid OEM lead times without risking a clone.

What This TZIDC Variant Delivers

This is the intelligent, configurable TZIDC positioner with integral indicator and operator panel, built into a varnished aluminum case rated IP 65 / NEMA 4X. The case mounts to linear actuators per DIN/IEC 534 / NAMUR or rotary actuators per VDI/VDE 3845, and it is ready for integral mounting. The electrical input is a 4–20 mA two-wire signal with a connector plug for an LKS adapter. Output configuration is single acting, fail safe — on electrical power failure the valve moves to its safe position. A plug-in analog position feedback module (4–20 mA) is fitted; the mechanical digital feedback kit is not included. Cable entry uses an M20 x 1.5 thread, and the air pipe connection is G 1/4. Supply pressure range is 1.4 to 6 bar (20 to 90 psi), and air consumption stays below 0.03 kg/h (0.015 scfm) independent of supply pressure. The unit weighs 1.7 kg.

Figure 1: Front view of the ABB V18345-1010261001 Valve Positioner showing its physical design and enclosure.

Why Surplus Beats Waiting for OEM

A failed positioner on a critical valve often means weeks of OEM lead time — or paying a premium for expedited new stock. Genuine surplus and refurbished units close that gap. Every TZIDC positioner we supply is inspected for case integrity, terminal condition, and pneumatic port threads, then tested against the OEM datasheet specifications and functionally verified by our sourcing team. You get the same form, fit, and 4–20 mA behavior as the original, at a fraction of OEM list price. Because this variant is a specific configuration — analog feedback, no explosion protection, single-acting fail-safe — matching the exact suffix matters. Autronexa cross-references the full part number so you receive the correct build, not a lookalike.

Figure 2: Technical layout and connection details for the ABB V18345-1010261001 Valve Positioner.

Sourcing Checklist for This Positioner

Before ordering, confirm three things. First, verify the actuator interface: this unit suits linear actuators per DIN/IEC 534 / NAMUR or rotary actuators per VDI/VDE 3845, and integral mounting is supported. Second, check the electrical interface — the 4–20 mA two-wire input with LKS adapter plug must match your control system; if your loop uses a different signal, this is not the right variant. Third, confirm the fail-safe direction: single acting, fail safe means the valve drives to a defined safe position on power loss. Also note the M20 x 1.5 cable entry and G 1/4 air connection; adapters may be needed if your existing piping uses 1/4-18 NPT. This unit carries no explosion protection, so it is not for hazardous areas. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this ABB V18345-1010261001 a genuine unit or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished ABB positioners, not grey-market copies.

What condition will the positioner arrive in?

Our default condition is Refurbished: the unit is inspected, tested against OEM datasheet specifications, and functionally verified by our sourcing team before shipment.

How fast can you ship the V18345-1010261001?

Lead time depends on current stock. Contact Autronexa for current availability and lead time — surplus units typically ship faster than OEM factory orders.

Does this positioner work with my existing 4–20 mA control loop?

Yes, this variant has a 4–20 mA two-wire input with a connector plug for an LKS adapter. Confirm your control system matches this signal before ordering.

Is the ABB TZIDC still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

ABB

TU805K01

Genuine surplus ABB TU805K01 kit: 10 pcs TU805 16-channel 50 V terminal units for S800 I/O DI801/DO801. Verified…

In Stock

ABB

TU890

Genuine surplus ABB TU890 MTU for S800 I/O — verified condition, 8 channels, intrinsic-safety ready, ready to ship…

In Stock

ABB

DI814

Genuine surplus ABB DI814 digital input module: 16 channels, 24 V d.c., 600 m field cable length. Verified…

In Stock

ABB

FENA-21

Genuine ABB FENA-21 dual-port Ethernet adapter for drives — PROFINET IO, EtherNet/IP, Modbus TCP. Verified surplus, ready to…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: V18345-1010261001

We reply within one business day.

V18345-1010261001 Quote reply within 1 business day