ABB Servo Drives & Motors

ABB DO828

Relay driver

Manufacturer: ABB Part Number: DO828

Genuine surplus ABB DO828 relay driver: 16 isolated channels, 125V DC/250V AC, 2A, S800 I/O. Verified condition and practical sourcing support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Signal specification 125 V d.c. / 250 V a.c., (5 - 125 V d.c. / 5 - 250 V a.c.), 2 A
Number of channels 16
Isolation Individually isolated, channel-to-channel and to circuit common
Rated insulation voltage 250 V
Dielectric test voltage 2000 V a.c.
Power dissipation Typ. 3.5 W
Operating temperature 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C
Protection class IP20 according to IEC 60529
Compatible MTU TU851

Description

When a relay output module fails on a running S800 I/O system, every hour of downtime adds pressure to maintenance and production targets. The ABB DO828 relay driver gives you 16 individually isolated output channels rated for 125 V d.c. / 250 V a.c. at 2 A, and Autronexa supplies it as a genuine surplus or refurbished unit with verified condition.

What This Module Does in an S800 I/O System

The DO828 is a digital output module for ABB’s S800 I/O family. Each of its 16 channels contains an optical isolation barrier, an output state LED, a relay driver, a relay and EMC protection components. Because every channel is isolated channel-to-channel and to circuit common, a fault on one field circuit does not disturb the others — a practical advantage when one output drives a contactor and another handles a small solenoid on the same card.

The module monitors the 12 V relay supply derived from the ModuleBus. If that voltage disappears, it raises an error signal readable through the ModuleBus and turns on the Warning LED. You can enable or disable this supervision with a parameter. The OSP function sets outputs to a predetermined state when an error is detected, which helps you plan a safe response instead of an undefined output state.

Figure 1: Front view of the ABB DO828 Relay driver showing its physical design and enclosure.

Technical Specs That Matter on the Floor

The signal specification covers 5–125 V d.c. / 5–250 V a.c. at 2 A, so the same module handles a range of field voltages without a separate variant. The rated insulation voltage is 250 V, and the dielectric test voltage is 2000 V a.c. — figures worth checking against your panel’s separation requirements. Maximum field cable length is 600 meters (656 yards), which suits most marshalling arrangements in process plants.

Power dissipation is typically 3.5 W, and current consumption is 45 mA from the +5 V ModuleBus and 80 mA from the +24 V ModuleBus. The unit carries CE marking, electrical safety to EN 61010-1 and UL 61010-1, and hazardous-location approvals including ATEX Zone 2. Operating temperature is 0 to +55 °C, with approvals issued for +5 to +55 °C. For vertical mounting in a compact MTU, the maximum ambient is 40 °C — a detail maintenance teams should confirm before swapping a module into a densely packed enclosure.

Why Genuine Surplus Fits This Relay Driver

S800 I/O systems stay in service for many years, and OEM lead times on individual modules can stretch when a single card fails. Autronexa keeps surplus and refurbished stock of ABB S800 components, and each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. That means you get a genuine part with documented condition rather than an unknown pull.

The module pairs with the TU851 MTU and uses keying code ED, so check your existing terminal unit before ordering. Dimensions are 45 mm wide, 102 mm deep (111 mm including connector) and 119 mm high, at 0.18 kg. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DO828, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference. The DO828 we supply is a genuine ABB module, sourced as surplus or professionally refurbished — not a grey-market copy.

What condition will the DO828 arrive in?

Units ship in refurbished condition as the site default: tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade confirmed before purchase.

How fast can you ship the DO828?

Lead time depends on current stock. Contact Autronexa for current lead time and availability — surplus and refurbished units are ready to ship once condition is verified.

Does the DO828 work with the TU851 MTU?

Yes. The data lists the TU851 as the matching MTU for this module, with keying code ED. Confirm your existing terminal unit and keying before ordering.

Is the DO828 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

ABB

AI523

Genuine surplus ABB AI523 S500 analog input module — 16 channels for U, I, RTD and DI signals,…

In Stock

ABB

07KP93

Genuine surplus ABB 07KP93 Modbus communication coupler for Advant Controller 31 — verified condition, ready to ship.

In Stock

ABB

07 KT 96

Genuine surplus ABB 07 KT 96 Advant Controller Basic Unit, verified and ready to ship for Advant-based control…

In Stock

ABB

DI810

Genuine surplus ABB DI810 digital input module, 16 channels, 24 V d.c., S800 mechanics — verified condition from…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DO828

We reply within one business day.

DO828 Quote reply within 1 business day