SEW Eurodrive Sensors & Encoders

SEW Eurodrive DEH11B

Encoder option card

Manufacturer: SEW Eurodrive Part Number: DEH11B

Genuine surplus SEW Eurodrive DEH11B HIPERFACE encoder option card for MOVIDRIVE MDX60B/61B drives, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Series MOVIDRIVE® Encoder Option Card
Motor encoder input X15 HIPERFACE®, sin/cos AC 1 V, TTL with negated tracks, RS422; 128/256/512/1024/2048 increments/revolution
External encoder input X14 Maximum 200 kHz; HIPERFACE®, sin/cos AC 1 V, TTL with negated tracks, RS422
Incremental encoder simulation output (X14) RS422 signal level, 1024 pulses/revolution
Encoder power supply DC +12 V (tolerance DC 10.5-13 V), I = DC 650 mA maximum total
Maximum encoder cable length 100 m
Compatible drives MOVIDRIVE® MDX60B/61B

Description

The SEW Eurodrive DEH11B is a HIPERFACE encoder option card for MOVIDRIVE MDX60B/61B drive inverters, providing one motor encoder input and one external encoder input. Maintenance teams and system integrators source this card when an existing MOVIDRIVE B drive needs encoder feedback restored or expanded, and a genuine surplus or refurbished unit keeps that repair practical without an OEM lead-time wait.

What the DEH11B Adds to a MOVIDRIVE B Drive

This unit plugs into the option slot of a MOVIDRIVE B unit and handles encoder feedback for the drive. Its motor encoder input X15 accepts HIPERFACE encoders, sin/cos encoders with AC 1 V signals, TTL encoders with negated tracks, and encoders with RS422 signal levels. Permitted resolution is 128, 256, 512, 1024, or 2048 increments per revolution, so the card covers a broad set of feedback devices used across motion and positioning tasks.

The external encoder input X14 supports the same signal families and accepts frequencies up to 200 kHz. X14 can also be configured as an incremental encoder simulation output, delivering RS422 signals at 1024 pulses per revolution. That makes the card useful where a drive must pass position feedback on to another controller or measuring device.

Figure 1: Front view of the SEW Eurodrive DEH11B Encoder option card showing its physical design and enclosure.

Technical Specs That Matter on the Floor

Encoder power comes from the card at DC +12 V, with a tolerance range of DC 10.5 to 13 V and a maximum total current of DC 650 mA. Check that your encoder’s supply requirement falls inside that window before fitting the card.

Maximum encoder cable length is 100 m, which supports long runs between a motor and its drive in larger cabinets or across machine sections. The 200 kHz limit on X14 sets the practical ceiling for external encoder frequency, so match it to the pulse output of the feedback device you plan to connect.

Because This unit is a plug-in card, it has no standalone environmental, power, or dimensional ratings published by the manufacturer. Its operating conditions are those of the host MOVIDRIVE B drive, and the card is documented in the MOVIDRIVE MDX60B/61B system manual.

Figure 2: Technical layout and connection details for the SEW Eurodrive DEH11B Encoder option card.

Why a Genuine Surplus unit Makes Sense

SEW Eurodrive option cards like This unit are often needed to keep an existing MOVIDRIVE B drive in service rather than replace the whole unit. A genuine surplus or refurbished card lets you restore encoder feedback without the cost and delay of a new-drive route. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, and refurbished cards are tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: DEH11B-datasheet.pdf

Frequently asked questions

Is this a genuine SEW Eurodrive DEH11B, or a clone?

Autronexa verifies every DEH11B against OEM datasheet markings and part-number cross-reference before it is listed. Units are genuine surplus or refurbished, not grey-market copies.

What condition will the DEH11B arrive in?

The default condition is refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available depending on stock.

How fast can you ship the DEH11B?

Contact Autronexa for current lead time on the DEH11B. Stock levels change, and we confirm availability and dispatch timing before you order.

Does the DEH11B work with my MOVIDRIVE B drive?

The DEH11B is a plug-in option card for MOVIDRIVE MDX60B/61B drive inverters. Confirm your drive model and option slot before ordering.

Is the DEH11B still supported by SEW Eurodrive?

The card is documented in the MOVIDRIVE MDX60B/61B system manual. Contact Autronexa to verify current OEM support status for your application.

Related & compatible parts

SEW Eurodrive · DRN Three-Phase Asynchronous Motor

DRN90L4

Genuine surplus SEW Eurodrive DRN90L4 motor: 1.5 kW, IE3 efficiency, 4-pole TEFC design with verified condition and practical…

In Stock

SEW Eurodrive

MCV41A0220-503-4-00

Genuine surplus SEW Eurodrive MCV41A0220-503-4-00: 22 kW MOVIDRIVE compact inverter with encoder feedback and built-in PROFIBUS-DP, verified before…

In Stock

SEW Eurodrive · DRN Three-Phase Asynchronous Motor

DRN315L4

Genuine surplus SEW DRN315L4 motor: 160 kW, IE3, 4-pole TEFC. Verified condition and clear lead times from Autronexa.

Quote on request

SEW Eurodrive

MXA80A-004-503-00

Genuine surplus SEW Eurodrive MXA80A-004-503-00 axis module: 4 A rated output, DC 560 V link, verified condition and…

Quote on request

News & guides for SEW Eurodrive

View all articles

Request a quote for this part

Part number: DEH11B

We reply within one business day.

DEH11B Quote reply within 1 business day