Lenze Servo Drives & Motors

Lenze E94AMHE0244

Drive axis module

Manufacturer: Lenze Part Number: E94AMHE0244

Genuine surplus Lenze E94AMHE0244 axis module, 11 kW, CANopen, DC-bus mounting. Verified condition and practical sourcing support from Autronexa.

Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated motor power 11 kW nominal (ASM 4-pole, 400 V class)
Rated output current 29.4 A nominal at 4 kHz switching frequency
Max. output current 44.1 A maximum
Max. short-term output current 58.8 A maximum short-term
Overload factor 3
Rated DC-bus current 35.5 A nominal
Supply voltage DC 260 V -0 % … 775 V +0 % (DC-bus operation)
Built-in ports CANopen on board (HighLine); diagnostic interface (USB via E94AZCUS adapter)
Protection rating IP20 (EN 60529); NEMA 250 type 1
Dimensions (H×W×D) 350 mm (with 507 installation backplane) × 120 mm × 288 mm

Description

The Lenze E94AMHE0244 is a drive axis module in the Servo Drives 9400 HighLine Multi Drive series, rated 11 kW for 4-pole asynchronous motors in the 400 V class. Maintenance and procurement teams choose genuine surplus or refurbished units of this module to keep DC-bus cabinet drives running without long OEM waits. Autronexa supplies verified units with practical sourcing support.

What this module Module Does in a 9400 HighLine System

This axis module mounts in a DC-bus cabinet and drives one motor axis within a multi-axis 9400 HighLine configuration. It delivers 29.4 A nominal output current at 4 kHz switching frequency, with a 44.1 A maximum output current and 58.8 A maximum short-term output current. The overload factor of 3 supports short peaks beyond the nominal rating. Rated DC-bus current is 35.5 A nominal, and the module accepts a DC-bus supply from 260 V to 775 V. Power loss is 420 W. A built-in CANopen port handles network communication, and a diagnostic interface is available through the E94AZCUS USB adapter. Two extension slots accept E94AYC communication or extension modules, alongside one memory slot and one safety slot.

Figure 1: Front view of the Lenze E94AMHE0244 Drive axis module showing its physical design and enclosure.

Surplus and Refurbished Supply for This Lenze Axis Module

OEM lead times on active drive modules can slow a planned cabinet rebuild or a single-axis replacement. Genuine surplus and refurbished this module units give buyers a practical alternative. Each unit is checked against OEM datasheet markings and part-number cross-reference before dispatch, so the module you receive matches the 11 kW, 29.4 A, CANopen configuration described here. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Because the 9400 Servo Drives range remains part of the active Lenze L-force product line, surplus stock often fills the gap while a new-build order is processed.

Figure 2: Technical layout and connection details for the Lenze E94AMHE0244 Drive axis module.

How This Module Compares with Other Drive Options

Buyers weighing this module against other drive hardware can use these practical distinctions:

  • Versus a standalone inverter: this module is a DC-bus cabinet axis module, not a self-contained wall-mount drive, so it suits multi-axis 9400 HighLine cabinets.
  • Versus a lower-power axis module: this unit is rated 11 kW nominal with 29.4 A output current, so it fits 4-pole asynchronous motors in the 400 V class rather than small single-axis loads.
  • Versus a different communication option: CANopen is built in here, while other configurations rely on E94AYC extension modules in the two available slots.
  • Versus new-from-OEM supply: surplus and refurbished units offer a shorter path to a verified module when OEM lead time is the constraint.

Selection and Sourcing Checks

Before ordering, confirm the exact model code, the 11 kW motor rating, and the CANopen network requirement. Check that your cabinet uses the 507 installation backplane, since the 350 mm height figure applies with that backplane fitted. The module is rated IP20 and NEMA 250 type 1, so it belongs inside a suitable enclosure. Operating temperature spans -10 °C to +55 °C, with rated output current derated by 2.5 %/°C above +45 °C. Site altitude up to 4000 m AMSL is supported, with a 5 % derating per 1000 m above 1000 m. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the Lenze E94AMHE0244 a genuine part or a clone?

Autronexa verifies each Lenze E94AMHE0244 against OEM datasheet markings and part-number cross-reference before it is listed. Units are genuine surplus or refurbished stock, not grey-market copies.

What condition will the E94AMHE0244 arrive in?

The Lenze E94AMHE0244 is supplied as refurbished stock by default. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch.

How fast can Autronexa ship the E94AMHE0244?

Lead time for the Lenze E94AMHE0244 depends on current stock at the time of order. Contact Autronexa with your part number for verified condition and current availability.

Does the E94AMHE0244 support CANopen communication?

Yes. The Lenze E94AMHE0244 includes a built-in CANopen port, and the datasheet lists CANopen as its protocol. Two extension slots are also available for E94AYC communication or extension modules.

Related & compatible parts

Lenze

E82CV302K4C

Genuine surplus Lenze E82CV302K4C 8200 vector inverter with cold-plate cooling, 3.0 kW rating and 7.3 A output —…

In Stock

Lenze

E82CV402K4C

Genuine surplus Lenze E82CV402K4C cold-plate inverter: 4.0 kW, 9.5 A, 320–550 V AC, IP20. Verified condition and practical…

In Stock

Lenze

E84DGDVB75242PS

Genuine surplus Lenze E84DGDVB75242PS inverter switch: 7.5 kW, 16.5 A, IP54, 340–528 V. Verified condition and practical sourcing…

Quote on request

Lenze

ECSEP016C4B

Genuine surplus Lenze ECSEP016C4B ECS servo drive module, verified and refurbished. Sourcing help for this 16.0 A axis…

Quote on request

News & guides for Lenze

View all articles

Request a quote for this part

Part number: E94AMHE0244

We reply within one business day.

E94AMHE0244 Quote reply within 1 business day