Flexem PLCs & Controllers

Flexem FE3343C

Hmi

Manufacturer: Flexem Part Number: FE3343C

Genuine Flexem FE3343C 4.3-inch HMI with resistive touch, RS232/485/422 serial and USB download — verified surplus and refurbished units from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Display 4.3" 16:9 TFT LCD, 480×272
Touch panel 4-wire industrial resistive touchscreen
CPU 1 GHz dual-core Cortex-A7
Memory 128 MB Flash + 64 MB DDR2
Built-in serial COM1 (RS232/RS485/RS422), COM3 (RS232)
Supply voltage DC 24 V nominal, operating range DC 9–28 V
Power consumption <5 W maximum
Operating temperature 0 to 50 °C
Protection rating Front IP65, rear IP20
Panel cutout (W×H) 132×80 mm

Description

What happens when a compact operator panel fails on a running machine and the OEM lead time stretches into weeks? The Flexem FE3343C answers that problem directly: a 4.3-inch 16:9 widescreen resistive-touch HMI from the FE3300 series, built for panel-mount operator interface duty. Autronexa supplies it as verified genuine surplus and refurbished stock, so maintenance teams can restore the interface without waiting on a factory order.

What the FE3343C Delivers at the Machine

This unit pairs a 4.3″ 16:9 TFT LCD at 480×272 resolution with a 4-wire industrial resistive touchscreen. A 1 GHz dual-core Cortex-A7 CPU runs the panel, backed by 128 MB Flash and 64 MB DDR2 memory. The LED backlight produces 360 cd/m² typical brightness, and the LCD is rated for 50,000 hours of life. Viewing angles are 80° in all four directions, so the screen stays readable from typical standing positions. A built-in real-time clock keeps time-stamped events accurate, and programming uses Flexem’s FStudio software.

Figure 1: Front view of the Flexem FE3343C Hmi showing its physical design and enclosure.

Serial Connectivity and Panel Installation

Communication runs through built-in serial ports: COM1 supports RS232, RS485 and RS422, while COM3 provides RS232. There is no Ethernet port, so this model suits serial-based control architectures. Program download goes through the Type-C OTG port as a USB slave or from a USB flash drive, with an adapter cable required. The unit accepts DC 24 V nominal with an operating range of DC 9–28 V and draws under 5 W maximum. Front protection is IP65 when flush-mounted in a cabinet, with IP20 at the rear. The panel cutout measures 132×80 mm, and the enclosure is light gray engineering plastic.

Figure 2: Technical layout and connection details for the Flexem FE3343C Hmi.

Why Genuine Surplus Makes Sense Here

Because This unit is part of the current FE3300 series product line, buyers have a real choice between ordering new and sourcing verified surplus. Autronexa’s refurbished units are tested against OEM datasheet specifications and functionally verified before dispatch. That approach shortens the path from fault to running machine and avoids paying full OEM list price for a panel that performs the same operator interface role. For plants standardizing on serial HMIs, keeping a verified spare on the shelf is practical insurance.

What to Confirm Before You Order

Check that your application matches the serial configuration you need, since this model has no Ethernet and no SD card slot. Confirm the 132×80 mm cutout and the 0 to 50 °C operating temperature suit your cabinet. Decide whether you need surplus or refurbished condition and state it in your request. Autronexa can cross-reference markings and part numbers so the unit you receive matches the one you are replacing.

📄 Download Datasheet: FE3343C-datasheet.pdf

Frequently asked questions

Is the Flexem FE3343C a genuine unit or a clone?

Autronexa verifies every FE3343C against OEM datasheet markings and part-number cross-references before it enters stock. Units are supplied as genuine surplus or professionally refurbished, not grey-market copies.

What condition will the FE3343C arrive in?

The FE3343C is supplied in the condition you specify, typically refurbished and tested against OEM datasheet specifications, or as genuine surplus. Confirm the exact grading with Autronexa when you request a quote.

How fast can Autronexa ship the FE3343C?

Lead time depends on current stock and condition. Contact Autronexa with your part number for verified condition and current availability before placing your order.

Does the FE3343C support Ethernet?

No. The Flexem FE3343C has no Ethernet port. Communication runs through COM1 (RS232/RS485/RS422) and COM3 (RS232), with program download over the Type-C USB port or a USB flash drive.

Related & compatible parts

Flexem

FE3370C

Genuine Flexem FE3370C 7-inch HMI with three serial ports and USB download. Verified surplus and refurbished units from…

In Stock

Flexem

FL8-E8-D

Genuine surplus Flexem FL8-E8-D CPU module with 8-axis EtherCAT control, dual Ethernet, and integrated I/O — verified and…

In Stock

Flexem

F5-MD0800

Genuine surplus Flexem F5-MD0800 controller with 8 digital inputs and 24VDC supply. Verified condition and practical sourcing support…

In Stock

Flexem

F5-MA0800A

Genuine surplus Flexem F5-MA0800A 8-input analog module with 16-bit resolution and removable terminal block wiring.

In Stock

News & guides for Flexem

View all articles

Request a quote for this part

Part number: FE3343C

We reply within one business day.

FE3343C Quote reply within 1 business day