Flexem PLCs & Controllers

Flexem FE6100WE

Hmi

Manufacturer: Flexem Part Number: FE6100WE

Genuine surplus Flexem FE6100WE 10.1-inch resistive HMI with Ethernet and 24V DC input, verified and ready to ship from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Display 10.1" 16:9 TFT LCD, 1024×600, 400 cd/m²
CPU 600MHz ARM Cortex-A8
Memory 128MB Flash + 128MB DDR3
Ethernet 1×10/100M adaptive (RJ45)
Serial ports COM1: RS232/RS485/RS422; COM2: RS485; COM3: RS232
Supply voltage DC 24V (range DC 9 to 28 V)
Power consumption <10W maximum
Operating temperature 0 to 50 °C
Protection rating Front IP65 (flush panel), rear IP20
Panel cutout (W×H) 260×202 mm

Description

The Flexem FE6100WE is a 10.1-inch resistive-touch IIoT HMI with a 1024×600 TFT LCD, built-in Ethernet, and a 600MHz ARM Cortex-A8 CPU. Maintenance and automation teams choose genuine surplus or refurbished units of this legacy model to replace failed panels without waiting on OEM lead times. Autronexa verifies each unit against OEM datasheet markings before it ships.

What the FE6100WE Offers on the Factory Floor

This HMI runs on a 600MHz ARM Cortex-A8 processor with 128MB Flash and 128MB DDR3 memory. The 10.1-inch 16:9 TFT LCD delivers 1024×600 resolution, 24-bit color, and 400 cd/m² brightness. Its 4-wire industrial resistive touch screen accepts input through gloves or stylus, which suits dusty or washdown-adjacent control cabinets. A built-in real-time clock keeps event logs time-stamped, and the MicroSD slot supports local data storage. The front face carries an IP65 rating when flush-mounted, while the rear is IP20. The light-gray engineering-plastic bezel fits a 260×202 mm panel cutout, and the unit weighs roughly 0.920 kg.

Figure 1: Front view of the Flexem FE6100WE Hmi showing its physical design and enclosure.

Connections and Electrical Fit

Commissioning is straightforward because This unit includes one 10/100M adaptive Ethernet port (RJ45), one USB Slave 2.0 MicroUSB port, and one USB Host 2.0 Type A port. Three serial ports cover common plant devices: COM1 supports RS232, RS485, or RS422; COM2 provides RS485; and COM3 offers RS232. Program downloads can run over USB Slave, a U-disk, or Ethernet using FStudio software. Power comes from a DC 24V supply with a range of DC 9 to 28 V, drawing under 10W maximum. Lightning and surge protection are built in, and the unit tolerates power interruptions under 5ms maximum. EMC ratings include EN61000-6-2:2005, EN61000-6-4:2007, and RoHS, with surge immunity of ±1kV, EFT of ±2kV, and ESD contact of 4kV or air of 8kV. For IIoT expansion, a dedicated slot accepts FLink, FLink-2G-A, FLink-4G-A, or FLink-WiFi-A modules.

Figure 2: Technical layout and connection details for the Flexem FE6100WE Hmi.

Why Buy Surplus or Refurbished unit Units?

Flexem lists This unit as legacy and superseded by the FE6400WE per an official upgrade notice dated 2024-01-31. That status makes genuine surplus and refurbished stock a practical route for maintenance teams supporting existing machines. Autronexa sources verified units and confirms condition before dispatch, so you avoid grey-market clones and unknown-history panels. Each refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Because these are surplus and refurbished, ready to ship, you can often restore a line faster than ordering a new-build replacement. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: FE6100WE-datasheet.pdf

Frequently asked questions

Is the Flexem FE6100WE a genuine unit or a clone?

Autronexa verifies every Flexem FE6100WE against OEM datasheet markings and part-number cross-reference before listing. We supply genuine surplus and refurbished units, not grey-market copies.

What condition will the FE6100WE arrive in?

The Flexem FE6100WE is supplied as refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the specific condition grade of current stock.

How fast can Autronexa ship the FE6100WE?

Lead time depends on current verified stock. Contact Autronexa for the current lead time on the Flexem FE6100WE and we will confirm availability before you order.

Does the FE6100WE work with my existing serial devices?

The Flexem FE6100WE provides COM1 (RS232/RS485/RS422), COM2 (RS485), and COM3 (RS232), plus one 10/100M Ethernet port. Confirm your device protocol and cabling requirements with Autronexa before ordering.

Related & compatible parts

Flexem

FR-A0004M

Flexem Analog Output Module FR-A0004M: 4-channel analog input, 16-bit resolution, ±10V, 0~20mA

Available on request

Flexem

F5-MD0404R

Genuine surplus Flexem F5-MD0404R digital expansion module with 4 bipolar inputs, 24 VDC rated, and source/sinking compatibility.

In Stock

Flexem

F5-BA0101B

Genuine surplus Flexem F5-BA0101B analog expansion board with 12-bit resolution and 0-10V / 0-20mA I/O — verified and…

In Stock

Flexem

FE7070C

Genuine surplus Flexem FE7070C HMI panel with a 7-inch 800×480 resistive touchscreen, verified condition and practical sourcing support.

In Stock

News & guides for Flexem

View all articles

Request a quote for this part

Part number: FE6100WE

We reply within one business day.

FE6100WE Quote reply within 1 business day