Flexem PLCs & Controllers

Flexem FE7100W

HMI panel

Manufacturer: Flexem Part Number: FE7100W

Genuine surplus Flexem FE7100W HMI panel: 10.1-inch 1024×600 resistive touch, 24V DC, front IP65. Verified condition and clear lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Display 10.1" 16:9 TFT LCD
Resolution 1024×600
Touch panel 4-wire resistive touchscreen
CPU 1 GHz dual-core Cortex-A7
Memory 128 MB DDR3 + 256 MB Flash
Built-in ports 1×USB Type-C OTG; 1×USB Type-A; no Ethernet; COM1 (RS232/RS485/RS422); COM2 (RS485); COM3 (RS232)
Supply voltage DC 24V nominal, operating range DC 9–28V
Power consumption <10W maximum
Protection rating Front IP65 (NEMA panel), rear IP20
Operating temperature 0 to 50 °C

Description

The Flexem FE7100W is a 10.1-inch 16:9 resistive-touch HMI panel with 1024×600 resolution and no built-in Ethernet port. Maintenance teams choose genuine surplus or refurbished units of this FE7000 series model when an OEM replacement path is too slow for a running line.

What Does the FE7100W Solve on a Legacy Control Enclosure?

When a panel-mount HMI fails, the replacement must fit the existing cutout and the existing wiring. This unit addresses that constraint directly: its panel cutout measures 260×202 mm, and the enclosure is engineering plastic in light gray. Because the unit is panel mount, a technician can swap it into the same opening without cabinet rework.

The display is a 10.1″ 16:9 TFT LCD with 24-bit color and 400 cd/m² brightness. Viewing angles are 85° top, bottom, left and right, so operators can read alarms from an angle. The 4-wire resistive touchscreen accepts gloved or stylus input, which suits wash-down and workshop floors. LED backlighting and a rated LCD lifetime of 50,000 hours support long service intervals.

Figure 1: Front view of the Flexem FE7100W HMI panel showing its physical design and enclosure.

Which Interfaces Fit Existing Serial and USB Wiring?

Many plants still run serial devices alongside USB service ports. This unit provides COM1 (RS232/RS485/RS422), COM2 (RS485) and COM3 (RS232), plus one USB Type-C OTG port and one USB Type-A port. There is no Ethernet port and no communication expansion, so network-based architectures need a different model in the family.

Processing runs on a 1 GHz dual-core Cortex-A7 with 128 MB DDR3 and 256 MB Flash. A built-in real-time clock keeps timestamps stable across power cycles. Bluetooth is not supported, and an SD card slot is not available, so recipe and log storage must be planned around the onboard Flash. Programming uses Flexem FStudio software.

Figure 2: Technical layout and connection details for the Flexem FE7100W HMI panel.

Why Choose Genuine Surplus for This unit?

Autronexa supplies genuine surplus and refurbished automation components, and each unit is verified against OEM datasheet markings before dispatch. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. That matters when the alternative is waiting on a factory order while a panel sits dark.

The electrical design tolerates real plant power: DC 24V nominal with an operating range of DC 9–28V, under 10W maximum consumption, and power interruption tolerance below 5 ms. EMC ratings include EN61000-6-2:2019 and EN61000-6-4:2019, with lightning surge protection built in. The front face carries IP65 (NEMA panel) protection and the rear IP20, while operating temperature spans 0 to 50 °C. Natural convection cooling means no fan to service.

This unit remains part of the current Flexem FE7000 series product line, with the official product page active as of 2026-09. For buyers who need a verified unit rather than a catalog promise, surplus and refurbished stock is ready to ship. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: FE7100W-datasheet.pdf

Frequently asked questions

Is the Flexem FE7100W a genuine unit or a clone?

Autronexa verifies each Flexem FE7100W against OEM datasheet markings and part-number cross-reference before it enters stock. Units are supplied as genuine surplus or professionally refurbished components, not grey-market copies.

What condition will the FE7100W arrive in?

The Autronexa default condition for the Flexem FE7100W is refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask for the current condition grade on the specific unit before ordering.

Does the FE7100W have an Ethernet port?

No. The Flexem FE7100W has no built-in Ethernet port and no communication expansion. Its built-in ports are one USB Type-C OTG, one USB Type-A, COM1 (RS232/RS485/RS422), COM2 (RS485) and COM3 (RS232).

How fast can Autronexa ship the FE7100W?

Lead time depends on the verified unit on hand. Contact Autronexa with the Flexem FE7100W part number for current availability and a confirmed dispatch date.

Related & compatible parts

Flexem

F5-MA0800A

Genuine surplus Flexem F5-MA0800A 8-input analog module with 16-bit resolution and removable terminal block wiring.

In Stock

Flexem

FE7070C

Genuine surplus Flexem FE7070C HMI panel with a 7-inch 800×480 resistive touchscreen, verified condition and practical sourcing support.

In Stock

Flexem

FR-A0004M

Flexem Analog Output Module FR-A0004M: 4-channel analog input, 16-bit resolution, ±10V, 0~20mA

Available on request

Flexem

F5-MD0404R

Genuine surplus Flexem F5-MD0404R digital expansion module with 4 bipolar inputs, 24 VDC rated, and source/sinking compatibility.

In Stock

News & guides for Flexem

View all articles

Request a quote for this part

Part number: FE7100W

We reply within one business day.

FE7100W Quote reply within 1 business day