Flexem PLCs & Controllers

Flexem FE9100M

HMI panel

Manufacturer: Flexem Part Number: FE9100M

Genuine surplus Flexem FE9100M HMI panel with 10.1-inch 1024×600 resistive touch, dual Ethernet and 1.2 GHz quad-core CPU — verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Display 10.1" 16:9 TFT LCD, 1024×600
Brightness 400 cd/m²
CPU 1.2 GHz quad-core Cortex-A53
Memory 8 GB Flash + 1 GB DDR3
Supply voltage DC 24V nominal, operating range DC 9–28V
Power consumption <10W maximum
Operating temperature -10 to 60 °C
Protection rating Front IP65, rear IP20
Dimensions (H×W×D) 214×274×39 mm
Panel cutout (W×H) 260×202 mm

Description

The Flexem FE9100M is a 10.1-inch 16:9 industrial resistive-touch HMI panel with 1024×600 resolution and dual Ethernet ports, built for panel-mount machine control. Maintenance and procurement teams choose genuine surplus or refurbished units of this model to keep legacy lines running without OEM lead-time exposure or full list-price spend.

What the FE9100M Delivers on the Factory Floor

At its core, This unit pairs a 1.2 GHz quad-core Cortex-A53 processor with 8 GB Flash and 1 GB DDR3 memory. That combination keeps screen refreshes and recipe handling responsive, so operators spend less time waiting on page changes and more time on the line. The 10.1″ 16:9 TFT LCD runs at 1024×600 with 16-bit colour and 400 cd/m² brightness, which supports clear status visibility under typical plant lighting. A 4-wire industrial resistive touchscreen responds to gloved input, reducing mis-taps and rework during shift changes. The LED backlight carries a stated LCD lifetime of 50,000 hours, which spreads replacement cost across a long service window rather than a short refresh cycle.

Figure 1: Front view of the Flexem FE9100M HMI panel showing its physical design and enclosure.

Connectivity That Cuts Integration Cost

Dual RJ45 ports at 10/100 Mbps auto-adaptive give This unit two network paths, so a panel can sit on a machine network and a supervisory link without an extra switch. Serial coverage is broad: COM1 handles RS232, RS485 and RS422; COM2 covers RS485 and RS422; COM3 provides RS232. That mix lets one panel replace several single-protocol terminals, trimming both hardware spend and spare-parts inventory. USB Slave 2.0 and USB Host 2.0 ports support programming and peripheral connection, while FStudio software handles project development. Communication expansion is listed as none, so buyers should map required links against the built-in ports before ordering.

Figure 2: Technical layout and connection details for the Flexem FE9100M HMI panel.

Why Genuine Surplus Makes Sense for This Panel

This unit sits in the current Flexem FE9000 series line, with the official product page active as of 2026-09. Even for an active model, surplus and refurbished stock shortens the gap between a failed panel and a running machine. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, then functionally checks it before dispatch. Electrical headroom helps here: the panel accepts DC 9–28V around a 24V nominal supply, draws under 10W maximum and tolerates power interruptions under 5 ms. Front IP65 and rear IP20 protection, an aluminium alloy enclosure and a -10 to 60 °C operating range suit panel-mount cabinets in mixed plant environments. Verified condition plus clear lead times makes surplus a practical alternative to waiting on a factory order.

Sourcing Checks Before You Commit

Confirm the exact model and revision against your existing unit, and match the 260×202 mm panel cutout and 214×274×39 mm body before installation. Decide whether you need surplus or refurbished condition, and state it in your request. Ask for the verification record and current lead time so maintenance planning stays realistic. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: FE9100M-datasheet.pdf

Frequently asked questions

Is the Flexem FE9100M a genuine unit or a clone?

Autronexa verifies each Flexem FE9100M against OEM datasheet markings and part-number cross-reference before it enters stock. Units are genuine surplus or professionally refurbished, and the verification record is available on request.

What condition will the FE9100M arrive in?

The Flexem FE9100M is supplied as refurbished stock by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus condition may also be available, so state your preference when you request a quote.

How fast can Autronexa ship the FE9100M?

Lead time for the Flexem FE9100M depends on current stock and condition. Contact Autronexa with your part number for verified condition and current availability, and the team will confirm dispatch timing.

Does the FE9100M fit a standard panel cutout?

The Flexem FE9100M uses a panel-mount design with a 260×202 mm cutout and a 214×274×39 mm body. Check these figures against your existing enclosure before ordering to avoid rework.

Related & compatible parts

Flexem

FL8-E4-D

Genuine surplus Flexem FL8-E4-D CPU module with 4-axis EtherCAT, dual Ethernet, and 8-point I/O — verified and ready…

In Stock

Flexem

F5-MA0004A

Genuine surplus Flexem F5-MA0004A 4-output analog module with 16-bit resolution and removable terminal block, verified and ready to…

In Stock

Flexem

F5-MA0404A

Genuine surplus Flexem F5-MA0404A analog expansion module with 4 inputs and 4 outputs, 16-bit resolution, verified and ready…

In Stock

Flexem

F5-MA0402A

Genuine surplus Flexem F5-MA0402A analog expansion module with 4 inputs, 4/2 outputs, 16-bit resolution, and 24 VDC power.

In Stock

News & guides for Flexem

View all articles

Request a quote for this part

Part number: FE9100M

We reply within one business day.

FE9100M Quote reply within 1 business day