MTL Servo Drives & Motors

MTL IOP HC32

Drive solenoids

Manufacturer: MTL Part Number: IOP HC32

Genuine MTL IOP HC32 surge protector for one high-current loop up to 5A, with 20kA hybrid protection and zero loop resistance.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Maximum rated load current 5A (IOP HC32)
Maximum surge current 20kA (8/20µs waveform) per line
Loop resistance 0 ohm (IOP HC32)
Leakage current <1µA @ working voltage
Response time <1ns
Terminals 2.5mm2 (12 AWG)
Mounting T-section DIN-rail (35 x 15mm rail)
Case flammability UL94-V0

Description

How do you protect a high-current solenoid circuit from surges without adding resistance that dulls response? The MTL IOP HC32 answers that question with a 5A-rated surge protector built for one high-current loop, combining a 20kA hybrid circuit with 0 ohm series resistance so the driven load sees no added impedance.

What the IOP HC32 Does in a Solenoid Circuit

This unit belongs to the MTL IOP range of surge protection devices for digital and analogue I/O. Its specific role is protecting circuits that drive solenoids, relays and actuators at load currents up to 5A. The hybrid circuit pairs 20kA gas discharge tubes with solid-state components, and the module reacts in under 1ns to redirect surges between lines or to ground. Because series resistance is 0 ohm, the protector adds no measurable voltage drop to the loop. The module occupies 12mm of DIN rail width for its single loop, mounts on T-section 35 x 15mm rail, and uses plug/header screw terminals accepting 2.5mm2 (12 AWG) conductors. Removable terminals allow a loop disconnect by unplugging them from the side of the module.

Figure 1: Front view of the MTL IOP HC32 Drive solenoids showing its physical design and enclosure.

Technical Specs That Matter for High-Current Loops

Three values define this model’s fit. First, the 5A maximum rated load current separates the HC32 from the 0.675A rating of the rest of the IOP family, so it suits solenoid drive circuits rather than signal-level I/O. Second, the 0 ohm loop resistance means the protection stays electrically transparent to the load. Third, the 20kA maximum surge current per line, rated on an 8/20µs waveform, gives the module its surge-handling capacity. Leakage current stays below 1µA at working voltage, and the case carries a UL94-V0 flammability rating. This unit is not bandwidth-rated, which reflects its role on slower, higher-current drive circuits rather than high-frequency signal lines.

Figure 2: Technical layout and connection details for the MTL IOP HC32 Drive solenoids.

Why Genuine Surplus Makes Sense for This Module

Surge protectors are often replaced on a schedule or after a known surge event, so tested surplus units fit the maintenance cycle well. Autronexa supplies genuine surplus and refurbished unit modules, each checked against OEM datasheet specifications and functionally verified before dispatch. That approach gives maintenance teams a practical alternative to waiting on OEM lead times for a part that protects a single loop. Because the module resets automatically after diverting a surge, a verified unit returns to service without intervention. Confirm the exact model and condition when you enquire, since the IOP family includes single-loop, dual-loop and AC variants with different ratings.

Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the MTL IOP HC32 a genuine unit or a copy?

Autronexa verifies each IOP HC32 against OEM datasheet markings and part-number cross-reference before it is listed. Units are genuine surplus or professionally refurbished, not grey-market clones.

What condition will the IOP HC32 arrive in?

Units are supplied refurbished as standard, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask Autronexa to confirm the condition grade on the specific unit before ordering.

How fast can Autronexa ship the IOP HC32?

Contact Autronexa for current lead time on the IOP HC32. Stock levels for surplus modules change with incoming batches, so the team confirms availability at the time of your request.

Can the IOP HC32 protect a 5A solenoid loop?

Yes. The IOP HC32 is rated for one high-current loop up to 5A, with 0 ohm series resistance and a 20kA maximum surge current per line on an 8/20µs waveform.

Related & compatible parts

MTL

MTL4041P

Genuine surplus MTL4041P isolator: high-power 4-20mA loop driver for hazardous-area transmitters, verified and ready to ship from Autronexa.

In Stock

MTL

SD32R

Genuine surplus MTL SD32R surge protector with 32 Vdc nominal voltage, 400 mA nominal current, and high bandwidth…

In Stock

MTL

SD16R

Genuine MTL SD16R surge protection device with 50MHz bandwidth and <1ns response time. Verified surplus and refurbished units…

In Stock

MTL

SD55X

Genuine surplus MTL SD55X surge protection device with 55 VDC nominal voltage and low resistance, verified and ready…

In Stock

News & guides for MTL

View all articles

Request a quote for this part

Part number: IOP HC32

We reply within one business day.

IOP HC32 Quote reply within 1 business day