Lenze Drives & Inverters

Lenze ESMD113L4TXA

Frequency Inverter

Manufacturer: Lenze Part Number: ESMD113L4TXA

Genuine surplus Lenze ESMD113L4TXA frequency inverter: 11 kW, 400 VAC 3-phase, 27 A, PID control. Verified condition and clear lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Power Supply Voltage 400 Volts AC
Current Rating 27 Amperes
Rated Output 11 kilowatt
Input Phase Type 3-phase input
Output Frequency 0 to 500 Hertz
Input Frequency 50 to 60 hertz
Control Method PID controller
Protection Class IP20
Operating Temperature 0 to 55° C
Overload Capacity 150% in 60 seconds

Description

The Lenze ESMD113L4TXA is a 3-phase frequency inverter rated 11 kilowatts at 400 Volts AC and 27 Amperes, built for industrial motor control. Maintenance teams choose genuine surplus or refurbished units like this to replace failed drives without the long lead times of new OEM stock. Autronexa verifies each unit against OEM datasheet markings before it ships.

What this drive Inverter Does in a Drive System

This Lenze inverter converts a fixed 400 Volts AC three-phase supply into a variable-frequency output from 0 to 500 Hertz. As a result, it controls motor speed smoothly across a wide range instead of running at a fixed rate. The PID controller adjusts output based on feedback, which suits processes that need stable regulation rather than simple on-off switching.

Its I/O set covers common control needs: one analog input, four digital inputs, and one digital relay output. The 150% overload capacity for 60 seconds gives the drive headroom for brief starting currents. The IP20 protection class means the unit belongs inside a clean control cabinet, not in dusty or wet areas.

Figure 1: Front view of the Lenze ESMD113L4TXA Frequency Inverter showing its physical design and enclosure.

Surplus and Refurbished: Why This Model Fits the Sourcing Route

When an this drive fails, the replacement decision often comes down to time. OEM lead times for legacy drive families can stretch while a line sits idle. Genuine surplus and refurbished stock shortens that gap because the unit already exists in the channel.

Autronexa sources these inverters as genuine surplus or professionally refurbished units. Each one is tested against OEM datasheet specifications and functionally verified before dispatch. You get a verified part with a known condition grade, not an unknown pull from a scrap bin. For plants running mixed drive fleets, this route keeps spares available without tying up capital in new stock.

Figure 2: Technical layout and connection details for the Lenze ESMD113L4TXA Frequency Inverter.

How this drive Compares with Other Drive Options

Buyers often weigh this model against three alternatives:

  • New OEM drive: full warranty and latest revision, but longer lead time and higher list price.
  • Grey-market clone: low price, but no traceable authenticity and no verified test record.
  • Different drive family: may fit the panel, but requires re-engineering of wiring and parameters.
  • Genuine surplus or refurbished this drive: exact form, fit, and function, verified condition, and faster availability.

The last option wins when the priority is getting the existing machine back to its original configuration. Because the unit matches the original part number, no rewiring or parameter rebuild is needed.

Selection and Sourcing Checks Before You Order

Confirm the supply voltage is 400 Volts AC three-phase and the motor load falls within the 11 kilowatt rating. Check that the 27 Ampere current rating covers your application and that the cabinet maintains 0 to 55° C operating temperature. Storage between -20 and 70° C is acceptable for spares held on site.

Verify the exact part number and any revision markings on your existing unit before ordering. Autronexa can cross-reference your nameplate data and confirm the condition grade of available stock. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the Lenze ESMD113L4TXA a genuine part or a clone?

Autronexa verifies each Lenze ESMD113L4TXA against OEM datasheet markings and part-number cross-references before listing. Units are sourced as genuine surplus or professionally refurbished stock, not grey-market copies.

What condition will the ESMD113L4TXA arrive in?

The Lenze ESMD113L4TXA is supplied as refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa to confirm the condition grade of current stock.

How fast can Autronexa ship the ESMD113L4TXA?

Lead time depends on current stock levels for the Lenze ESMD113L4TXA. Contact Autronexa for the current lead time and availability before placing your order.

Does the ESMD113L4TXA support PID control for my process?

Yes. The Lenze ESMD113L4TXA uses a PID controller and provides one analog input, four digital inputs, and one digital relay output for feedback and control connections.

Related & compatible parts

Lenze

33.8214-E

Genuine surplus Lenze 33.8214-E (EVF8214-E) 3.0 kW inverter — verified condition, practical replacement for the superseded 821X-E family.

In Stock

Lenze

EVF8223-EV

Genuine surplus Lenze EVF8223-EV inverter: 30 kW, 59 A, 41.6 kVA, IP20, with verified condition and practical sourcing…

In Stock

Lenze

E82EV113-4C

Genuine surplus Lenze E82EV113-4C frequency inverter, 11.0 kW, 400 V class. Verified condition, practical lead times, and sourcing…

Quote on request

Lenze

EVF9331-EVV004

Genuine surplus Lenze EVF9331-EVV004 frequency inverter with 55 kW rating and KSR safe-standstill relay, verified and ready for…

Quote on request

News & guides for Lenze

View all articles

Request a quote for this part

Part number: ESMD113L4TXA

We reply within one business day.

ESMD113L4TXA Quote reply within 1 business day