Mitsubishi Power Supplies

Mitsubishi MR-J3-500A4-RJ070

Power Supply Voltage 24 Volts DC

Manufacturer: Mitsubishi Part Number: MR-J3-500A4-RJ070

Genuine surplus Mitsubishi MR-J3-500A4-RJ070 servo amplifier, verified and refurbished, with 5 kW output and 380–480 VAC supply.

Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Product Line MELSERVO MR-J3
Control Method Sine wave pulse width modulation (PWM) control and current control
Output Power Rating 5 kilowatt
Supply Voltage Rating 380 to 480 Volts AC
Permissible Voltage Fluctuation 323 to 528 Volts AC
Input Phase Type 3-phase
Interface Power Supply 24 Volts DC, 0.3 Amperes
Maximum Number of Stations 15 stations
Protection Rating IP00 (open enclosure)
Weight 15.00 lbs (6.80 kg)

Description

The Mitsubishi MR-J3-500A4-RJ070 is a Power Supply Voltage 24 Volts DC for industrial control and automation applications.

The Mitsubishi MR-J3-500A4-RJ070 is a turret indexer AC servo amplifier from the MELSERVO MR-J3 series, rated at 5 kilowatts output with a 380 to 480 Volts AC supply. Maintenance teams choose genuine surplus or refurbished units to replace failed drives without long OEM lead times, and Autronexa verifies each unit before it ships.

What this power supply Does in a Turret Indexing System

This amplifier manages motion through sine wave pulse width modulation (PWM) control and current control, which keeps indexing smooth on multi-station turrets. It supports up to 15 stations, so a single unit can coordinate a full tool or position set. A built-in dynamic brake provides controlled deceleration during stops, which matters when a heavy turret must settle without overshoot. The permissible positioning error is approximately ±3 revolutions, giving the control loop room for small deviations. Forced ventilation cooling handles heat under continuous cycling, and the open enclosure carries an IP00 protection rating, so the amplifier belongs inside a cabinet rather than on an open panel.

Figure 1: Front view of the Mitsubishi MR-J3-500A4-RJ070 Power Supply Voltage 24 Volts DC showing its physical design and enclosure.

Supply, Interface and Physical Details

this power supply runs on 3-phase input at 380 to 480 Volts AC, with permissible voltage fluctuation from 323 to 528 Volts AC. That tolerance range helps the drive ride through normal plant voltage swings without nuisance trips. The interface power supply is rated at 24 Volts DC with a capacity of 0.3 Amperes, which is the control-side feed a maintenance engineer checks first when a drive will not come ready. Input capacity is 45 Watts. The unit weighs 15.00 lbs (6.80 kg), so plan for a two-person lift or a small hoist during changeout.

Figure 2: Technical layout and connection details for the Mitsubishi MR-J3-500A4-RJ070 Power Supply Voltage 24 Volts DC.

Why Genuine Surplus Fits This Drive

When a turret indexer amplifier fails, the line waits. OEM lead times can stretch, and grey-market units carry real risk of mismatched revisions. Autronexa supplies genuine surplus and refurbished MR-J3 units that are tested against OEM datasheet specifications and functionally verified by our sourcing team. That means you get a practical replacement path with verified condition and clear lead times, backed by technical sourcing help across Allen-Bradley, Bently Nevada, Siemens, Schneider and more. Before ordering, confirm the exact revision and any accessory requirements with our team, because the MR-J3 family includes several configurations that are not interchangeable.

Service Notes for Maintenance Engineers

Inspect the forced ventilation path at each scheduled shutdown, since blocked airflow is a common cause of overtemperature faults. Check the 24 Volts DC interface supply and the 3-phase input terminals for tightness and signs of heat. Verify that the dynamic brake engages cleanly during deceleration tests. Keep the cabinet enclosure sealed around the IP00 unit so dust does not reach the internal boards. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is the MR-J3-500A4-RJ070 a genuine Mitsubishi unit or a clone?

Autronexa verifies every MR-J3-500A4-RJ070 against OEM datasheet markings and part-number cross-reference before it is listed. Units are genuine surplus or professionally refurbished, not grey-market copies.

What condition will the MR-J3-500A4-RJ070 arrive in?

The MR-J3-500A4-RJ070 ships in refurbished condition by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a surplus unit instead.

How fast can Autronexa ship the MR-J3-500A4-RJ070?

Lead time for the MR-J3-500A4-RJ070 depends on current stock. Contact Autronexa with your part number to confirm verified condition and current availability before you commit to a delivery date.

Does the MR-J3-500A4-RJ070 suit a 15-station turret?

Yes. The MR-J3-500A4-RJ070 supports a maximum of 15 stations and permits a positioning error of approximately ±3 revolutions, which fits multi-station turret indexing duty.

Related & compatible parts

Mitsubishi

MR-J4-10B

Genuine surplus Mitsubishi MR-J4-10B servo drive amplifier, verified and ready to ship. Contact Autronexa for current availability.

Quote on request

Mitsubishi

FX1N-60MT-001

Genuine Mitsubishi FX1N-60MT-001 PLC with 36 inputs, 24 transistor outputs, and AC100-240V power. Verified surplus and refurbished units…

In Stock

Mitsubishi

FX3SA-14MR-CM

Genuine surplus Mitsubishi FX3SA-14MR-CM PLC with 6 inputs and 4 relay outputs, verified and ready to ship from…

Quote on request

Mitsubishi

FX1S-20MR-001

Genuine surplus Mitsubishi FX1S-20MR-001 PLC with 20 I/O points and relay outputs. Verified condition, practical sourcing support from…

In Stock

News & guides for Mitsubishi

View all articles

Request a quote for this part

Part number: MR-J3-500A4-RJ070

We reply within one business day.

MR-J3-500A4-RJ070 Quote reply within 1 business day