Mitsubishi I/O & Function Modules

Mitsubishi MR-J4-20B

Between 200 and 230 volts AC

Manufacturer: Mitsubishi Part Number: MR-J4-20B

Genuine surplus Mitsubishi MR-J4-20B servo amplifier, 3-phase 200-230V AC, 200 W output, SSCNET III/H. Verified condition and clear lead times from Autronexa.

Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Power Supply Voltage 3-phase, 200-230V AC
Input Frequency 50/60 Hertz
Output Capacity 200 W
Maximum Output Capacity 220 W
Input Current 1.5 Amp
Control Method Current control or Speed control
Control Modes Position, Speed, Torque control
Communication Interface SSCNET III/H
Ambient Operating Temperature 0°C to 55°C
Weight 1.69 lbs (0.77 kg)

Description

The Mitsubishi MR-J4-20B is a Between 200 and 230 volts AC for industrial control and automation applications.

When a servo axis faults on a packaging line, every minute of downtime adds up. The Mitsubishi MR-J4-20B is a MELSERVO MR-J4 servo amplifier that runs on 3-phase, 200-230V AC and delivers 200 W output capacity, with 220 W maximum output capacity. It supports position, speed and torque control modes, so one amplifier can cover indexing, conveying and tensioning duties. Autronexa supplies genuine surplus and refurbished units with verified condition and practical sourcing support.

What this unit Does in a Motion System

this unit sits between the controller and the servo motor, closing the loop on position, speed or torque. Its control method is current control or speed control, and motor feedback comes from an incremental or absolute encoder; encoder resolution depends on the connected motor. Communication runs over SSCNET III/H, Mitsubishi’s proprietary network, which keeps command and feedback traffic on a dedicated motion bus. Built-in safety functions cover overcurrent, overspeed, overvoltage, overload and instantaneous power loss, while protective functions add overvoltage, undervoltage, overload and overheat protection. The amplifier accepts multiple digital outputs and draws 1.5 Amp input current at 50/60 Hertz. At 1.69 lbs (0.77 kg), it fits compact panel space, and its 0°C to 55°C ambient operating range suits typical industrial cabinets.

Figure 1: Front view of the Mitsubishi MR-J4-20B Between 200 and 230 volts AC showing its physical design and enclosure.

Why Genuine Surplus Makes Sense for This Amplifier

OEM lead times on motion hardware can stall a rebuild, especially when a single axis is holding up a whole machine. A genuine surplus or refurbished this unit lets you restore the axis without redesigning the panel. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, and refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. You get a practical alternative to waiting on a factory order, with condition stated up front and lead times confirmed before you commit. Because this unit is part of the MELSERVO MR-J4 line, matching the exact model and revision to your existing drive is the first step in any swap.

Figure 2: Technical layout and connection details for the Mitsubishi MR-J4-20B Between 200 and 230 volts AC.

Sourcing Checks Before You Order

Confirm the existing amplifier’s model and revision, then match the power supply voltage of 3-phase, 200-230V AC and the 200 W output capacity to your motor and machine load. Check whether your motor uses an incremental or absolute encoder, since encoder resolution depends on the connected motor. Review the SSCNET III/H network connection and any cabling or gateway needs with your supplier. Decide between surplus and refurbished condition based on how critical the axis is, and ask for the verified condition in writing. Share your part number with Autronexa and we will confirm verified condition and current availability.

Frequently asked questions

Is the Mitsubishi MR-J4-20B a genuine unit or a clone?

Autronexa verifies each Mitsubishi MR-J4-20B against OEM datasheet markings and part-number cross-reference before it is listed. Units are genuine surplus or professionally refurbished, not grey-market copies.

What condition will the MR-J4-20B arrive in?

The Mitsubishi MR-J4-20B is supplied as genuine surplus or refurbished stock. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team, and the condition is confirmed with you before ordering.

How fast can Autronexa ship the MR-J4-20B?

Lead time for the Mitsubishi MR-J4-20B depends on current verified stock. Contact Autronexa with your part number and we will confirm verified condition and current availability, including the expected ship date.

Does the MR-J4-20B work with my existing SSCNET III/H system?

The Mitsubishi MR-J4-20B communicates over SSCNET III/H, Mitsubishi's proprietary network, and supports position, speed and torque control modes. Confirm your controller and cabling match this network before ordering.

Related & compatible parts

Mitsubishi

MR-J3-40BS-EB

Genuine surplus Mitsubishi MR-J3-40BS-EB servo component: 0.4 kW output, 200–230 VAC 1-phase input, conformal coated. Verified condition from…

Quote on request

Mitsubishi

FX3G-14MR/ES

Genuine surplus Mitsubishi FX3G-14MR/ES PLC with 8 DC inputs and 6 relay outputs, verified and ready for sourcing…

Quote on request

Mitsubishi

MR-J3-500B

Genuine surplus Mitsubishi MR-J3-500B servo drive, verified and refurbished, with 3-phase 200-230VAC input and 24VDC control.

Quote on request

Mitsubishi

FX1N-60MR-001

Genuine surplus Mitsubishi FX1N-60MR-001 micro PLC with 36 inputs, 24 relay outputs, and AC220V supply — verified and…

In Stock

News & guides for Mitsubishi

View all articles

Request a quote for this part

Part number: MR-J4-20B

We reply within one business day.

MR-J4-20B Quote reply within 1 business day