Schneider Electric Communication Modules

Schneider Electric 170MCI02110

Communication Cable

Manufacturer: Schneider Electric Part Number: 170MCI02110

Genuine surplus Schneider 170MCI02110 Modicon Momentum I/O cable — verified, tested, and ready to ship from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Line Modicon Momentum
Connector A 20-pin male
Connector B 20-pin female
Cable Length 2 meters (typical)
Voltage Rating 30 V
Current Rating 1A
Operating Temperature -10°C to +60°C
Cable Type Round shielded (foil + drain)
Wire Gauge 26 AWG copper
Jacket Material PVC

Description

When a Modicon Momentum I/O base connection fails, every hour of downtime adds cost. The Schneider Electric 170MCI02110 communication cable is the genuine 2-meter round shielded link between Momentum I/O bases, and Autronexa supplies it as verified surplus or refurbished stock — tested against OEM datasheet specifications and functionally checked before dispatch, so maintenance teams get a practical replacement without waiting on factory lead times.

What This Momentum Cable Does in Your Panel

The 170MCI02110 is a base-to-base connection cable for the Modicon Momentum I/O family. It carries a 20-pin male connector on one end and a matching 20-pin female connector on the other, with a proprietary MODBUS/Momentum I/O interface. The round shielded construction uses foil plus drain shielding to limit electromagnetic interference, which matters when the cable runs alongside drives or contactors in a crowded enclosure. The 26 AWG copper conductors and PVC jacket keep the assembly flexible enough for routine service work, and the 2-meter length gives technicians room to route the cable without strain on the connector shells.

Figure 1: Front view of the Schneider Electric 170MCI02110 Communication Cable showing its physical design and enclosure.

Electrical Ratings and Environmental Limits

The cable is rated for 30 V and up to 1A, matching the low-voltage signalling duty of Momentum I/O interconnections. Its operating temperature range of -10°C to +60°C covers typical panel interiors, and the assembly is RoHS compliant. From a maintenance standpoint, these ratings mean the cable is not a wear item under normal load — failures usually trace to mechanical damage at the connector, repeated flexing, or a shield drain left unconnected during a previous service. Inspect the 20-pin contacts for bent pins and confirm the shield is properly terminated whenever the cable is disturbed. Keep spare cable on hand rather than attempting field repairs, and follow the manufacturer documentation for any installation work.

Figure 2: Technical layout and connection details for the Schneider Electric 170MCI02110 Communication Cable.

Why Genuine Surplus Fits This Part

Momentum installations are long-lived, and a failed interconnect cable can stop a whole I/O segment. OEM lead times on legacy cabling are often the bottleneck, not the price. Autronexa holds genuine surplus and refurbished units of this cable, verified against OEM datasheet markings and part-number cross-reference, with clear condition notes and current availability confirmed before you commit. That gives you a tested replacement path when a line is down and a practical alternative to paying full list price for a commodity-length cable. Please verify current lifecycle status and availability with Autronexa before ordering.

When you need a verified replacement, contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric 170MCI02110, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The cable you receive is a genuine Schneider Electric assembly, not a grey-market copy.

What condition will the cable arrive in?

Units ship in the site default condition, Refurbished, meaning tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition note for your maintenance records.

How fast can Autronexa ship the 170MCI02110?

Lead time depends on current stock. Contact Autronexa with your part number and we will confirm verified condition and current availability, including the expected dispatch date, before you order.

Does this cable connect Modicon Momentum I/O bases directly?

Yes. It is a base-to-base connection cable with a 20-pin male connector on one end and a 20-pin female on the other, using the proprietary MODBUS/Momentum I/O interface. Confirm your specific base model with Autronexa if you are unsure.

Related & compatible parts

Schneider Electric

140XTS00500

Genuine surplus Schneider Electric 140XTS00500 field power connector for Modicon Quantum power supplies — verified condition, ready to…

In Stock

Schneider Electric

TSX07211622

Genuine surplus TSX07211622 PLC from Schneider Electric — 24 VDC, relay outputs, verified condition and ready to ship.

In Stock

Schneider Electric

170ADO54000

Genuine surplus Schneider Electric 170ADO54000 Modicon Momentum 16-channel AC Triac module — verified condition, ready to ship.

In Stock

Schneider Electric

140ARI03010C

Genuine surplus Schneider Electric 140ARI03010C analogue input module — 8 differential inputs, 13-bit resolution, verified condition and ready…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 170MCI02110

We reply within one business day.

170MCI02110 Quote reply within 1 business day