Schneider Electric Cables & Connectors

Schneider Electric ABE7E16EPN20

Passive discrete I/O sub-base

Manufacturer: Schneider Electric Part Number: ABE7E16EPN20

Genuine surplus Schneider Electric ABE7E16EPN20 passive discrete I/O sub-base — 16 channels, 24 V DC, verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Line Modicon ABE7
Number of Channels 16
Supply Voltage (controller side) 19…30 V DC (IEC 61131-2)
Supply Voltage (sensor/controller side) 20.4…26.4 V DC (IEC 61131-2)
Discrete Input Logic Sink
Connector Type HE-10, 20 pins
Terminal Capacity (solid) 0.14…2.5 mm² (AWG 26…12)
Operating Temperature -5…60 °C (IEC 61131-2)
Net Weight 0.43 kg

Description

The Schneider Electric ABE7E16EPN20 is a passive discrete I/O sub-base for Modicon systems, built to connect 16 discrete channels to a Twido programmable controller at 24 V DC. Maintenance and procurement teams choose genuine surplus or refurbished units of this sub-base when OEM lead times stall a running line and the original connection hardware must match exactly.

What This Sub-Base Does in a Modicon System

This unit sits between field wiring and the controller, distributing a 24 V DC supply across 16 discrete input channels with sink logic and one common per 16 channels. It accepts HE-10 connectors with 20 pins and mounts by clips on 35 mm symmetrical DIN rail per IEC 60715 or by screws. Screw terminals handle solid conductors from 0.14 to 2.5 mm² (AWG 26 to AWG 12) and flexible conductors with cable ends from 0.09 to 1.5 mm² (AWG 28 to AWG 16). A 2 A internal fast-blow fuse (5 x 20 mm) protects the controller side, and the rated insulation voltage is 2000 V between terminals and mounting rails. The unit is listed to IEC 61131-2 Type 1 and carries CSA and UL certifications.

Figure 1: Front view of the Schneider Electric ABE7E16EPN20 Passive discrete I/O sub-base showing its physical design and enclosure.

Technical Specs That Matter for Sizing

Two supply windows define compatibility. On the controller side, the sub-base operates from 19 to 30 V DC per IEC 61131-2; on the sensor/controller side, the window is 20.4 to 26.4 V DC. Confirm your cabinet supply falls inside both before installing. The input circuit draws 15 mA switched current, and the power supply fuse drops 0.3 V — account for that in marginal 24 V designs. Environmental ratings are broad: operation from -5 to 60 °C and storage from -40 to 80 °C, both to IEC 61131-2, with IP2X protection per IEC 60529 and pollution degree 2. Shock resistance is 15 gn for 11 ms and vibration resistance 2 gn from 10 to 150 Hz. The unit weighs 0.43 kg.

Figure 2: Technical layout and connection details for the Schneider Electric ABE7E16EPN20 Passive discrete I/O sub-base.

Surplus Sourcing for This Sub-Base

Passive sub-bases are simple hardware, but they are configuration-specific: the 16-channel layout, HE-10 connector, and Twido compatibility mean a substitute will not drop in without rewiring. Autronexa stocks genuine surplus and refurbished units of this part, each tested against OEM datasheet specifications and functionally verified by our sourcing team. Because these units carry no firmware or configuration memory, refurbishment is straightforward and the failure risk is low compared with active modules. If you are replacing a damaged sub-base on an existing Twido panel, a verified surplus unit typically reaches you faster than an OEM order and at a lower cost than list price. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this ABE7E16EPN20 a genuine Schneider Electric unit or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The sub-base ships with its original Schneider Electric identification intact.

What condition will the ABE7E16EPN20 arrive in?

Units ship in refurbished condition as the site default: tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade.

How fast can Autronexa ship this sub-base?

Lead time depends on current stock at the time of your request. Contact Autronexa with the part number for verified condition and current availability.

Does this sub-base work with Twido programmable controllers?

Yes. The data lists compatibility with the Twido programmable controller and the TWDDDI16DK and TWDDDI32DK modules, using HE-10 20-pin connectors and 24 V DC supplies.

Is the ABE7E16EPN20 still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and availability before ordering.

Related & compatible parts

Schneider Electric

TM2AMM6HT

Genuine surplus TM2AMM6HT analog I/O module for Modicon M238 — 4 current/voltage inputs, 2 outputs, verified and ready…

In Stock

Schneider Electric

110XTS00122

Genuine surplus Schneider Electric 110XTS00122 I/O base module for Modicon Momentum — verified condition, practical sourcing support.

In Stock

Schneider Electric

TM218LDA40DRN

Genuine surplus Schneider Electric TM218LDA40DRN Modicon M218 controller — 40 I/O, relay outputs, verified condition and lead times.

In Stock

Schneider Electric

TCSESM083F2CS0

Genuine surplus Schneider Electric TCSESM083F2CS0 managed switch — 6 copper + 2 single-mode fiber ports, verified and ready…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: ABE7E16EPN20

We reply within one business day.

ABE7E16EPN20 Quote reply within 1 business day