SEW Eurodrive I/O & Function Modules

SEW Eurodrive MCLTPB0015-2B1-4-30

Switch

Manufacturer: SEW Eurodrive Part Number: MCLTPB0015-2B1-4-30

Genuine surplus SEW Eurodrive MCLTPB0015-2B1-4-30 inverter, 1.5 kW, IP66 field housing, verified condition and clear lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Recommended motor power 1.5 kW (2.0 HP)
Supply voltage 1 x AC 200-240 V +/-10%
Rated output current 8 A
Nominal input current 4.0 A
Protection rating IP66/NEMA 4X
Protocols SBus, CANopen, Modbus RTU (direct)
Maximum output frequency 500 Hz
Operating temperature 0 to +40 °C maximum

Description

The SEW Eurodrive MCLTPB0015-2B1-4-30 is a Switch for industrial control and automation applications.

The SEW Eurodrive MCLTPB0015-2B1-4-30 is a MOVITRAC LTP-B standard inverter rated 1.5 kW with a single-phase 200–240 V input and an IP66/NEMA 4X field housing. Maintenance teams choose genuine surplus or refurbished units of this model when they need a verified replacement without waiting on OEM lead times. Autronexa supplies tested stock with clear condition notes and practical sourcing support.

What This Inverter Does in a Drive System

this sensor sits between the supply and a three-phase asynchronous or PM synchronous motor, converting single-phase input into a variable three-phase output. It delivers a rated output current of 8 A and a recommended motor power of 1.5 kW (2.0 HP), which suits small conveyors, fans, and pumps. Selectable PWM frequencies of 2/4/6/8/12 kHz let you balance motor noise against switching losses. The maximum output frequency of 500 Hz supports higher-speed duties, while motor cable runs can reach 100 m shielded or 150 m unshielded. A minimum braking resistance of 27 Ω applies where dynamic braking is required. The IP66/NEMA 4X housing allows installation in washdown or dusty areas without a separate cabinet, and the variant code -30 denotes a field housing without a main switch.

Figure 1: Front view of the SEW Eurodrive MCLTPB0015-2B1-4-30 Switch showing its physical design and enclosure.

Why Genuine Surplus Makes Sense for This Model

Because the MOVITRAC LTP-B series remains a current SEW-EURODRIVE line, buyers often face standard factory lead times on new units. Genuine surplus and refurbished stock offers a practical alternative when a drive fails and production cannot wait. Each unit Autronexa supplies is checked against OEM datasheet markings and functionally verified by our sourcing team, so the part you receive matches the model and configuration you ordered. This approach keeps critical spares moving without tying up capital in long-lead orders. For maintenance managers, the benefit is straightforward: a verified inverter with known condition, ready to install.

Figure 2: Technical layout and connection details for the SEW Eurodrive MCLTPB0015-2B1-4-30 Switch.

Communication and Integration Checks Before You Buy

this sensor includes an RJ45 engineering socket for MOVITOOLS MotionStudio and an SBus/MOVILINK system bus. Direct protocols are SBus, CANopen, and Modbus RTU. Fieldbus options such as PROFINET or EtherCAT are not integrated on the base unit; they require a plug-in gateway from the DFP../DHP.. range. Before ordering, confirm whether your system relies on one of the direct protocols or needs a gateway accessory. Also verify the supply voltage tolerance of 1 x AC 200–240 V +/-10% and the 50/60 Hz +/-5% line frequency against your site. Operating temperature is 0 to +40 °C maximum, with derating above 40 °C, so check enclosure conditions. Autronexa can help cross-check the model code and any gateway requirement against your application.

Sourcing Checklist for Buyers

Start with the exact model code, including the -30 housing suffix, because it defines the IP66 field housing without a main switch. Confirm the motor power and rated output current match your load. Review the communication path: direct SBus, CANopen, or Modbus RTU, or a gateway accessory for other fieldbuses. Ask for the condition grade and any test documentation. Autronexa provides verified surplus and refurbished units with clear lead times, and our team can answer technical questions about the MOVITRAC LTP-B family. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the SEW Eurodrive MCLTPB0015-2B1-4-30 a genuine unit or a clone?

Autronexa supplies genuine SEW-EURODRIVE MCLTPB0015-2B1-4-30 units sourced as surplus or refurbished stock. Each unit is checked against OEM datasheet markings and part-number cross-references before dispatch.

What condition will the MCLTPB0015-2B1-4-30 arrive in?

The MCLTPB0015-2B1-4-30 is supplied in refurbished condition by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the specific condition grade of current stock.

How fast can Autronexa ship the MCLTPB0015-2B1-4-30?

Lead time for the MCLTPB0015-2B1-4-30 depends on current stock at Autronexa. Contact us with your part number for verified condition and current availability, and we will confirm dispatch timing.

Does the MCLTPB0015-2B1-4-30 support PROFINET or EtherCAT directly?

No, the MCLTPB0015-2B1-4-30 does not have integrated PROFINET or EtherCAT. It provides SBus, CANopen, and Modbus RTU directly, and fieldbus options require a plug-in gateway from the DFP../DHP.. range.

Related & compatible parts

SEW Eurodrive

MDP90A-1100-503-4-000

Genuine surplus SEW Eurodrive MDP90A-1100-503-4-000 power supply module, 110 kW, verified and ready to ship from Autronexa.

Quote on request

SEW Eurodrive

MDX91A-0055-5E3-4-T00

Genuine surplus SEW Eurodrive MDX91A-0055-5E3-4-T00 inverter with 5.5 A output, EtherCAT, and integrated EMC filter. Verified condition and…

In Stock

SEW Eurodrive

DFP21B

Genuine surplus SEW Eurodrive DFP21B PROFIBUS DP-V1 option card for MOVITRAC B and MOVIDRIVE B drives, verified and…

In Stock

SEW Eurodrive · DRN Three-Phase Asynchronous Motor

DRN71M4

Genuine surplus SEW DRN71M4: 0.37 kW IE3 three-phase motor, 4-pole, IP55, S1 duty. Verified condition and practical sourcing…

In Stock

News & guides for SEW Eurodrive

View all articles

Request a quote for this part

Part number: MCLTPB0015-2B1-4-30

We reply within one business day.

MCLTPB0015-2B1-4-30 Quote reply within 1 business day