SEW Eurodrive Drives & Inverters

SEW Eurodrive DFP21B

DRIVE® B drive inverters

Manufacturer: SEW Eurodrive Part Number: DFP21B

Genuine surplus SEW Eurodrive DFP21B PROFIBUS DP-V1 option card for MOVITRAC B and MOVIDRIVE B drives, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Protocols PROFIBUS DP and DP-V1 per IEC 61158
Baud rate Automatic detection 9.6 kBd - 12 MBd
Built-in ports 9-pin D-sub connector (pin assignment per IEC 61158)
Station address 1-125, set via DIP switches
External voltage supply Via X26, U = DC 24 V (-15%, +20%)
Current draw I_max = DC 200 mA
Power consumption P_max = 3.4 W
Diagnostics Standard diagnostics 6 bytes
DP ID number 6009 hex (24585 decimal)
GSD file name SEW_6009.GSD

Description

How do you keep a MOVITRAC B or MOVIDRIVE B drive communicating when its fieldbus option card fails? The SEW Eurodrive DFP21B is a plug-in PROFIBUS DP and DP-V1 option card that restores network communication for these drive families. Autronexa supplies it as a verified surplus component, giving maintenance teams a practical alternative to waiting on OEM lead times.

What the DFP21B Does Inside the Drive

This unit is a plug-in fieldbus option card from the MOVIDRIVE PROFIBUS DPV1 option card series. It installs inside the host drive and connects to the network through a 9-pin D-sub connector, with pin assignment per IEC 61158. Because the card draws its operating power from the drive, it adds communication capability without a separate supply. The DP ID number is 6009 hex (24585 decimal), and the matching GSD file is SEW_6009.GSD, so commissioning follows the standard PROFIBUS configuration route.

Figure 1: Front view of the SEW Eurodrive DFP21B DRIVE® B drive inverters showing its physical design and enclosure.

Key Specifications at a Glance

Three values matter most during replacement. First, the card supports PROFIBUS DP and DP-V1 per IEC 61158, covering both cyclic and acyclic data exchange. Second, baud rate is detected automatically from 9.6 kBd to 12 MBd, so no manual rate setting is needed. Third, the station address is set from 1 to 125 via DIP switches. For external supply through X26, the card accepts DC 24 V (-15%, +20%) with a maximum current draw of DC 200 mA and maximum power consumption of 3.4 W. Standard diagnostics occupy 6 bytes.

Figure 2: Technical layout and connection details for the SEW Eurodrive DFP21B DRIVE® B drive inverters.

Why Genuine Surplus Makes Sense for This Card

This unit is a legacy option card documented in the MOVITRAC B system manual. When a card fails, the drive itself is often still serviceable, so replacing the card is the practical route. Autronexa sources genuine surplus and refurbished units, each verified against OEM datasheet markings and part-number cross-reference. That gives buyers a tested alternative with clear lead times instead of an open-ended wait. Note that bus termination is not integrated; use a PROFIBUS connector with switch-on terminating resistors.

Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: DFP21B-datasheet.pdf

Frequently asked questions

Is this DFP21B a genuine SEW Eurodrive card or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The DFP21B is supplied as a genuine surplus or refurbished card, not a copy.

What condition will the DFP21B arrive in?

Units are supplied refurbished and functionally verified by our sourcing team against the published specifications. Contact Autronexa for the current condition grade and photos of the specific unit.

How fast can Autronexa ship the DFP21B?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability, and the team will confirm shipping timing.

Does the DFP21B work with both MOVITRAC B and MOVIDRIVE B drives?

Yes. The DFP21B is a plug-in PROFIBUS DP and DP-V1 option card for MOVITRAC B and MOVIDRIVE B drive inverters, connected through a 9-pin D-sub connector per IEC 61158.

Related & compatible parts

SEW Eurodrive

MXA80A-004-503-00

Genuine surplus SEW Eurodrive MXA80A-004-503-00 axis module: 4 A rated output, DC 560 V link, verified condition and…

Quote on request

SEW Eurodrive · DRN Three-Phase Asynchronous Motor

DRN100L4

Genuine surplus SEW DRN100L4 3 kW IE3 motor, verified and ready to ship. Autronexa supplies tested refurbished units…

In Stock

SEW Eurodrive

MDX90A-0460-503-4-S00

Genuine surplus SEW Eurodrive MDX90A-0460-503-4-S00 single-axis inverter, 46.0 A at 4 kHz, verified condition and ready to ship.

In Stock

SEW Eurodrive

DEH11B

Genuine surplus SEW Eurodrive DEH11B HIPERFACE encoder option card for MOVIDRIVE MDX60B/61B drives, verified and ready to ship.

In Stock

News & guides for SEW Eurodrive

View all articles

Request a quote for this part

Part number: DFP21B

We reply within one business day.

DFP21B Quote reply within 1 business day