SICK Sensors & Encoders

SICK DFS60B-S1MA10000

Incremental Encoder

Manufacturer: SICK Part Number: DFS60B-S1MA10000

Genuine SICK DFS60B-S1MA10000 incremental encoder with 10,000 PPR and 6 x 10 mm shaft — verified surplus stock for fast replacement.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Pulses per Revolution 10,000 PPR
Shaft Size 6 x 10 mm
Operating Voltage 4.5 to 32 V
Connection Type Male connector, M23, 12-pin, radial
Output Frequency 600 kHz
Maximum Operating Speed 9,000 rpm
IP Rating IP67 housing side, IP65 shaft side
Operating Temperature Range –40 °C to +100 °C

Description

When a SICK DFS60B-S1MA10000 incremental encoder fails on a running axis, every hour of downtime adds cost. This genuine SICK unit delivers 10,000 PPR with a 6 x 10 mm shaft and 4.5 to 32 V supply, and Autronexa supplies it as verified surplus or refurbished stock for fast replacement.

High-Resolution Feedback Without the OEM Wait

The DFS60B-S1MA10000 solves a common engineering pain point: obtaining a high-resolution encoder quickly when a production line is down. It provides 10,000 pulses per revolution through a 6-channel incremental interface, factory-set to TTL output level. The 6 mm stainless steel shaft with 10 mm length and servo flange suits compact mounting. Because the unit is programmable for output voltage, zero pulse position, zero pulse width, and pulse count, engineers can match it to existing drive settings rather than redesigning the feedback loop. Autronexa verifies each unit against OEM datasheet markings before dispatch, so you receive a genuine part with traceable specifications.

Figure 1: Front view of the SICK DFS60B-S1MA10000 Incremental Encoder showing its physical design and enclosure.

Built for Harsh Environments and High Speeds

A second pain point is premature failure in demanding conditions. This unit addresses this with an aluminum die-cast housing rated IP67 on the housing side and IP65 on the shaft side. It operates from –40 °C to +100 °C and tolerates 70 g shock and 30 g vibration. Maximum operating speed reaches 9,000 rpm, and the 600 kHz output frequency supports fast motion control. The 12-pin M23 radial connector simplifies wiring, while reverse-polarity and short-circuit protection reduce commissioning risk. These ratings trace directly to the SICK datasheet, giving maintenance teams confidence in replacement decisions.

Figure 2: Technical layout and connection details for the SICK DFS60B-S1MA10000 Incremental Encoder.

Surplus Sourcing That Keeps Lines Running

OEM lead times for specialized encoders can stretch weeks, which is impractical when a critical axis is idle. Autronexa maintains surplus and refurbished stock of SICK DFS60 series units. Each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. You get a genuine part with clear condition grading and practical lead times, not a grey-market clone. For buyers comparing options, this approach balances authenticity with speed. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: DFS60B-S1MA10000-datasheet.pdf

Frequently asked questions

Is this a genuine SICK DFS60B-S1MA10000, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. The DFS60B-S1MA10000 we supply is a genuine SICK encoder, sourced as surplus or professionally refurbished stock.

What condition will the DFS60B-S1MA10000 arrive in?

Units are supplied as refurbished unless otherwise stated. Each encoder is tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch.

How fast can you ship the DFS60B-S1MA10000?

Contact Autronexa for current lead time. Surplus and refurbished stock is ready to ship once condition verification is complete.

Does the DFS60B-S1MA10000 work with TTL or HTL drive inputs?

The factory setting is TTL output level. The encoder is programmable for output voltage, so it can be adapted to match your drive interface. Confirm your required settings with Autronexa before ordering.

Related & compatible parts

SICK

KUP-0610-J

Genuine surplus SICK KUP-0610-J claw coupling with 6 mm and 10 mm bores, 8 N·m torque capacity and…

In Stock

SICK

DL100-11AA2101

Genuine surplus SICK DL100-11AA2101 laser distance sensor with 60 m range, 15 m/s tracking, and SSI interface —…

In Stock

SICK

MICS3-AAAZ40AZ1P01

Genuine surplus SICK MICS3-AAAZ40AZ1P01 safety laser scanner connector, verified and ready to ship from Autronexa's refurbished stock.

In Stock

SICK

BEF-FA-036-100

Genuine SICK BEF-FA-036-100 aluminum flange adapter — verified surplus and refurbished units for 36 mm to 100 mm…

In Stock

News & guides for SICK

View all articles

Request a quote for this part

Part number: DFS60B-S1MA10000

We reply within one business day.

DFS60B-S1MA10000 Quote reply within 1 business day