SICK I/O & Function Modules

SICK DL100-11AA2101

Racking Velocity: 15 m/s

Manufacturer: SICK Part Number: DL100-11AA2101

Genuine surplus SICK DL100-11AA2101 laser distance sensor with 60 m range, 15 m/s tracking, and SSI interface — verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Measuring Range 0.15 m ... 60 m (on Diamond Grade reflective tape)
Measurement Principle Phase Shift Optical Time-of-Flight Laser Distance Measurement
Light Source Visible red laser diode, 658 nm, Class 2 (IEC 60825-1:2014), < 1 mW
Measurement Accuracy Typ. ± 2 mm ... ± 3 mm
Repeatability 0.5 mm ... 1 mm (Typ. 0.5 mm at 1 σ)
Maximum Tracking Velocity 15 m/s
Maximum Acceleration 15 m/s²
Output Time / Measurement Cycle ≥ 1 ms (internal rate 1 ms; fieldbus cycle dependent)
Communication Interface SSI (Synchronous Serial Interface, Gray / Binary code)
Supply Voltage DC 18 V ... 30 V (reverse-polarity protected)
Enclosure Protection Rating IP65 (EN 60529)
Ambient Temperature, Operation -20 °C ... +55 °C

Description

The SICK DL100-11AA2101 is a phase-shift optical time-of-flight laser distance sensor from the Dx100 series, built for high-speed positioning up to 60 m on Diamond Grade reflective tape. Maintenance and automation teams choose genuine surplus or refurbished units of this model to restore ASRS and long-range measurement systems without OEM lead times. Public datasheet parameters are limited for this configuration — our sourcing team can provide verified specs on request.

Product Overview

The DL100-11AA2101 combines a visible red laser diode (658 nm, Class 2) with a phase-shift measurement principle to deliver typical accuracy of ±2 mm to ±3 mm and repeatability of 0.5 mm to 1 mm. Its maximum tracking velocity of 15 m/s and acceleration of 15 m/s² suit automated storage and retrieval systems where fast, precise positioning is critical. The integrated LC display and optical 3-axis alignment bracket compatibility simplify setup and alignment. Continuous condition monitoring tracks signal level attenuation, laser diode aging, and temperature, giving maintenance teams early warning of optical degradation.

Figure 1: Front view of the SICK DL100-11AA2101 Racking Velocity: 15 m/s showing its physical design and enclosure.

Surplus Advantage

Genuine surplus and refurbished SICK unit units offer a practical alternative to new OEM stock. Each refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Because this model is widely used in ASRS and long-range positioning, surplus availability can shorten replacement cycles compared with factory lead times. Autronexa specializes in genuine surplus and refurbished automation components, providing verified condition and clear lead times for maintenance and procurement teams.

Figure 2: Technical layout and connection details for the SICK DL100-11AA2101 Racking Velocity: 15 m/s.

Selection & Sourcing Guide

When sourcing a unit, verify the exact model and revision against your system requirements. Check that the SSI interface (Gray or Binary code) matches your controller, and confirm connector types: M12 4-pin A-coded for power and M12 8-pin for SSI bus. Consider condition grade — surplus versus refurbished — and ensure any accessories such as the alignment bracket are compatible. Autronexa can help cross-reference part numbers and confirm current availability. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: DL100-11AA2101-datasheet.pdf

Frequently asked questions

Is this a genuine SICK DL100-11AA2101, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished SICK components, not clones or copies.

What condition will the DL100-11AA2101 arrive in?

Units are supplied as refurbished unless otherwise stated. Each refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before shipping.

How fast can you ship the DL100-11AA2101?

Lead time depends on current stock. Contact Autronexa for current lead time and availability.

Does the DL100-11AA2101 work with my SSI controller?

The DL100-11AA2101 provides an SSI interface (Synchronous Serial Interface, Gray or Binary code). Confirm your controller supports SSI and the M12 8-pin bus connection.

Related & compatible parts

SICK

S30A-4111

Genuine surplus SICK S30A-4111 safety laser scanner with 4.0 m protective field and PROFINET IO/PROFIsafe — verified condition,…

In Stock

SICK

CLV650-6000

Genuine surplus SICK CLV650-6000 barcode scanner with oscillating mirror, 600–1,000 Hz scan rate, and IP65 housing — verified…

In Stock

SICK

CLV621-1120

Genuine SICK CLV621-1120 connectors for reliable barcode scanner integration. Verified surplus and refurbished units with clear lead times…

In Stock

SICK

DT500-A112

Genuine SICK DT500-A112 surplus laser distance sensor with 0.2–30 m range, 4–20 mA output, and IP65 housing —…

In Stock

News & guides for SICK

View all articles

Request a quote for this part

Part number: DL100-11AA2101

We reply within one business day.

DL100-11AA2101 Quote reply within 1 business day