SICK Sensors & Encoders

SICK KUP-0610-J

Encoders

Manufacturer: SICK Part Number: KUP-0610-J

Genuine surplus SICK KUP-0610-J claw coupling with 6 mm and 10 mm bores, 8 N·m torque capacity and ±1 mm axial offset compensation.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Bore diameter (encoder side, D1) 6 mm
Bore diameter (drive side, D2) 10 mm
Coupling type Claw coupling
Material Aluminum flange, polyurethane damping element (80 Shore, blue)
Nominal torque 8 N·m maximum (800 Ncm per datasheet)
Max. speed 19,000 rpm maximum; max. angle of twist 10°
Offset compensation Axial ±1 mm; radial ±0.22 mm; angular ±1.3°
Operating temperature –30 °C to +80 °C
Fastening Socket set screws per ISO 4029; tightening torque 150 Ncm maximum
Overall length 28.5 mm

Description

The SICK KUP-0610-J is a Encoders for industrial control and automation applications.

The SICK KUP-0610-J is a claw (jaw) shaft coupling with a blue polyurethane damping element, a 6 mm encoder-side bore and a 10 mm drive-side bore. It suits maintenance teams replacing worn encoder shaft adaptation hardware on running machinery, where a genuine surplus unit keeps the repair practical. For decades, encoder feedback has quietly anchored industrial control, and the small mechanical link between shaft and sensor has always deserved the same attention as the electronics. This unit belongs to SICK’s shaft adaptation (couplings) series, and its job is to pass rotary motion while absorbing the small misalignments that real installations produce.

What this unit Coupling Does in an Encoder Drive Train

The coupling combines an aluminum flange with a polyurethane damping element rated 80 Shore in blue. That construction lets it transmit torque while cushioning shock and compensating alignment error. Its maximum torque capacity is 8 N·m, or 800 Ncm per the datasheet, and it tolerates a maximum speed of 19,000 rpm with a maximum angle of twist of 10°. Shaft offset compensation covers up to ±1 mm axially, ±0.22 mm radially and ±1.3° angularly. The overall length is 28.5 mm, and the operating temperature range is –30 °C to +80 °C. Socket set screws per ISO 4029 secure the hubs, with a maximum tightening torque of 150 Ncm.

Figure 1: Front view of the SICK KUP-0610-J Encoders showing its physical design and enclosure.

Why Genuine Surplus Suits This Shaft Coupling

Couplings are wear items, so replacement demand continues long after a machine enters service. A genuine surplus or refurbished this unit gives buyers a practical alternative to waiting on OEM channels, and every unit is verified against OEM datasheet markings and part-number cross-reference before it is offered. Condition is stated clearly, and lead times are confirmed at the time of enquiry. Because the coupling is a mechanical interface rather than a smart device, the important checks are simple: bore sizes, damping element condition and set screw integrity. Autronexa supplies genuine parts, verified, with surplus and refurbished stock ready to ship.

Figure 2: Technical layout and connection details for the SICK KUP-0610-J Encoders.

Sourcing Checklist Before You Order

Confirm that your encoder shaft matches the 6 mm encoder-side bore and that the drive side matches the 10 mm bore. Check that the required torque falls within the 8 N·m maximum and that the application speed stays within 19,000 rpm. Review the offset figures against your alignment tolerance, and verify the ambient temperature sits inside –30 °C to +80 °C. Ask for the condition grade and current lead time, and confirm the set screw specification before installation. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is the SICK KUP-0610-J a genuine SICK part or a copy?

Autronexa verifies each SICK KUP-0610-J against OEM datasheet markings and part-number cross-reference before listing it, so buyers receive a genuine part rather than a clone.

What condition will the KUP-0610-J arrive in?

The SICK KUP-0610-J is supplied as genuine surplus or refurbished stock, with the condition grade stated at the time of enquiry and verified before dispatch.

How fast can Autronexa ship the KUP-0610-J?

Lead time for the SICK KUP-0610-J depends on current stock, so contact Autronexa with your part number for verified condition and current availability.

Does the KUP-0610-J fit both 6 mm and 10 mm shafts?

Yes, the SICK KUP-0610-J has a 6 mm bore on the encoder side and a 10 mm bore on the drive side, matching those two shaft diameters.

Related & compatible parts

SICK

CLV620-0120

Genuine surplus SICK CLV620-0120 fixed mount barcode scanner with Ethernet, 60–365 mm reading range, and IP65 housing —…

In Stock

SICK

DS500-N211

Genuine surplus SICK DS500-N211 measures up to 30 m on natural surfaces with a heated aluminum housing for…

In Stock

SICK

DL100-11AA2102

Genuine surplus SICK DL100-11AA2102 laser distance sensor for racking systems, offering 15 m/s tracking and PROFIBUS DP for…

In Stock

SICK

C4C-SA10530A10000

Genuine SICK C4C-SA10530A10000 deTec4 Core sender light curtain, 1,050 mm protective field, 30 mm resolution, M12 5-pin connector.…

In Stock

News & guides for SICK

View all articles

Request a quote for this part

Part number: KUP-0610-J

We reply within one business day.

KUP-0610-J Quote reply within 1 business day