SICK Sensors & Encoders

SICK DOL-1208-G20MAC1

Sensor-actuator connector cable

Manufacturer: SICK Part Number: DOL-1208-G20MAC1

Genuine SICK DOL-1208-G20MAC1: 20 m shielded PUR cable, M12 8-pin female to flying leads, IP67. Verified surplus stock for encoder signal runs.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Connector 1 Female connector, M12, 8-pin, straight
Connector 2 Flying leads (bare wires)
Cable length 20 m (per ordering code)
Conductor specification 4 × 2 × 0.25 mm²
Shielding Shielded
Operating temperature −25 °C ... +80 °C
Protection rating IP67
Rated current 2 A (current loading)
Bending cycles > 2,000,000

Description

The SICK DOL-1208-G20MAC1 is a Sensor-actuator connector cable for industrial control and automation applications.

The SICK DOL-1208-G20MAC1 is a 20 m shielded sensor-actuator connector cable with an M12 8-pin straight female connector and flying leads, built for incremental and SSI encoder signals. Maintenance and procurement teams choose genuine surplus or refurbished units of this cable to avoid OEM lead times and keep encoder loops running without a full-price replacement.

What This Encoder Cable Solves

When an encoder cable fails on a running line, every hour of downtime adds cost. This sensor answers that problem with a 20 m shielded PUR lead that reaches from cabinet to machine without an intermediate junction. Its 4 × 2 × 0.25 mm² conductor construction carries the paired signal lines that incremental and SSI encoders need, while the shield blocks electrical noise that would otherwise corrupt position feedback. The M12 8-pin straight female connector mates directly to the encoder, and the flying leads terminate in the cabinet. Fewer connection points mean fewer failure points and lower long-term maintenance spend.

Figure 1: Front view of the SICK DOL-1208-G20MAC1 Sensor-actuator connector cable showing its physical design and enclosure.

Specs That Affect Your Cost per Meter

Cable choice is a cost decision as much as a technical one. The PUR sheath is halogen-free and rated for −25 °C to +80 °C, so it suits both cold storage and warm machine areas without a separate cable variant. Its 7 mm diameter and flexible-use bending radius above 10 × cable diameter support tight routing, and more than 2,000,000 bending cycles mean the cable survives continuous flexing rather than becoming a recurring line item. IP67 protection at the connector head keeps moisture out of the signal path, protecting the encoder from water ingress damage. The 2 A current loading covers standard encoder supply needs.

Figure 2: Technical layout and connection details for the SICK DOL-1208-G20MAC1 Sensor-actuator connector cable.

Sourcing Genuine SICK Cable Without OEM Lead Time

Autronexa supplies this cable as genuine surplus and refurbished stock, verified against SICK datasheet markings and part-number cross-reference. That matters because a clone cable can pass a quick visual check yet fail in service, turning a low-cost purchase into a repeat downtime event. Each unit is inspected for sheath damage, connector condition and shield integrity before dispatch. Because the cable is a standard-length ordering-code item, buyers should confirm the 20 m length and 8-pin configuration match their encoder before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the SICK DOL-1208-G20MAC1 a genuine SICK cable or a clone?

Autronexa supplies the DOL-1208-G20MAC1 as genuine surplus or refurbished stock, verified against SICK datasheet markings and part-number cross-reference before dispatch.

What condition will the DOL-1208-G20MAC1 arrive in?

Units are supplied refurbished unless stated otherwise, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask Autronexa for the condition grading on current stock.

How fast can Autronexa ship the DOL-1208-G20MAC1?

Contact Autronexa for current lead time on the DOL-1208-G20MAC1. Surplus stock typically moves faster than an OEM factory order, and availability is confirmed at the time of your request.

Does this cable suit incremental and SSI encoder signals?

Yes. The DOL-1208-G20MAC1 is specified for incremental and SSI encoder signals, with a shielded 4 × 2 × 0.25 mm² construction and an M12 8-pin straight female connector.

Related & compatible parts

SICK

DL100-12AA2103

Genuine SICK DL100-12AA2103 laser distance sensor for ASRS: 15 m/s tracking, 130 m range, RS-422. Verified surplus and…

In Stock

SICK

S30B-2011CA

Genuine SICK S30B-2011CA safety laser scanner system plug for S300 Advanced. Verified surplus stock with clear lead times…

In Stock

SICK

DL100-12AA2109

Genuine surplus SICK DL100-12AA2109 laser sensor for ASRS positioning with 15 m/s tracking and ±2 mm accuracy. Verified…

In Stock

SICK · Dx50

DL50-2B215252

Retro-reflective measurement up to 50 m on reflective tape Advanced HDDM™ time-of-flight technology offering high measuring rate up…

Available on request

News & guides for SICK

View all articles

Request a quote for this part

Part number: DOL-1208-G20MAC1

We reply within one business day.

DOL-1208-G20MAC1 Quote reply within 1 business day