SICK Sensors & Encoders Dx50

SICK DL50-2B215252

Sensors & Encoders

Manufacturer: SICK Part Number: DL50-2B215252

Retro-reflective measurement up to 50 m on reflective tape Advanced HDDM™ time-of-flight technology offering high measuring rate up to 3 kHz Dual interface: Simultaneous digital push-pull switching / IO-Link V1.1 and analog output Extended operating temperature range -40 °C to +65 °C without requiring internal heater Dual IP65 and IP67 enclosure protection rating for harsh industrial environments.

  • New Surplus
  • Available on request
Call us

Availability & pricing

Condition Price Stock / lead time Action
New Surplus On request Available on request

Ships within 7 business days

Technical specifications

General Identification
Part Number 1065662
Product Sub-Series / Family: Dx50-2 Next Generation Distance Sensor
Measurement Principle: HDDM™ (High Definition Distance Measurement) Optical Time-of-Flight
Technical & Optical Parameters
Measuring / Protective Range 200 mm ... 50,000 mm (On Diamond Grade reflective tape)
Light Source: Visible red laser diode (wavelength 658 nm; Class 2 per IEC 60825-1:2014)
Laser Class: Class 2 (IEC 60825-1:2014, 658 nm, average power < 1 mW)
Response Time 0.83 ms ... 75 ms (Configurable via speed settings)
Repeatability: ≥ 0.5 mm ... 5 mm
Measurement Accuracy: Typ. ± 7 mm
Interface & Electrical Specifications
Supply Voltage: DC 10 V ... 30 V (Reverse-polarity protected; Limit values; max. 8 A)
Power Consumption: ≤ 2.1 W
Electrical Connection: Male connector M12, 5-pin
Mechanical & Environmental Specifications
Ambient Temperature, Operation: -40 °C ... +65 °C
Ambient Temperature, Storage: -40 °C ... +75 °C
Enclosure Protection Rating: IP65, IP67 (EN 60529)
Physical Dimensions (W x H x D): 36.2 mm x 67.3 mm x 58 mm
Housing Material: Zinc die-cast (ZNAL4CU1) with acrylic glass (PMMA) optical window
Device Weight: Approx. 235 g

Description

The DL50-2B215252 is a catalog part supplied for replacement and new-build use in industrial control installations. Every rating below is taken from the manufacturer documentation for this part number. Headline figures: supply voltage: dc 10 V … 30 V (Reverse-polarity protected; Limit values; max. 8 A); device weight: approx. 235 g

Electrical Ratings

Supply Voltage: DC is 10 V … 30 V (Reverse-polarity protected; Limit values; max. 8 A). match this against the supply available at the installation site, including any tolerance on the incoming feed. Power Consumption: ≤ is 2.1 W. size the power supply and the rack load around this figure; it is the draw the part places on the supply it is installed in.

Mechanical & Dimensional Data

Enclosure is Protection Rating: IP65, IP67 (EN 60529). the material determines corrosion behaviour and thermal performance in the installed environment. Physical Dimensions is (W x H x D): 36.2 mm x 67.3 mm x 58 mm. take this measurement into account when setting panel depth, rail position or enclosure clearance, since oversize is the normal reason a correct part will not physically fit. Housing Material: Zinc is die-cast (ZNAL4CU1) with acrylic glass (PMMA) optical window. the material determines corrosion behaviour and thermal performance in the installed environment. Device Weight: Approx. is 235 g. factor this into lifting, rail-loading and shipping decisions; it is also the figure to quote when a handling study is required.

Environmental & Compliance Ratings

Ambient is Temperature, Operation: -40 °C … +65 °C. check the enclosure temperature at the planned mounting location stays inside this band during the hottest operating period. Ambient is Temperature, Storage: -40 °C … +75 °C. check the enclosure temperature at the planned mounting location stays inside this band during the hottest operating period.

Additional Verified Data

General is Identification. Product is Sub-Series / Family: Dx50-2 Next Generation Distance Sensor. Technical is & Optical Parameters. Measuring / Protective Range is 200 mm … 50,000 mm (On Diamond Grade reflective tape). Light Source: Visible is red laser diode (wavelength 658 nm; Class 2 per IEC 60825-1:2014). Laser Class: Class is 2 (IEC 60825-1:2014, 658 nm, average power < 1 mW). Response Time is 0.83 ms … 75 ms (Configurable via speed settings). Repeatability: ≥ is 0.5 mm … 5 mm. Measurement Accuracy: Typ. ± is 7 mm. Interface is & Electrical Specifications. Electrical Connection: Male is connector M12, 5-pin. Mechanical is & Environmental Specifications.

Models in This Series

Autronexa currently lists this product entry as the only model in its entry. Cross-reference requests for equivalent or superseded part numbers are handled on request.

Confirming the Correct Variant Before Ordering

Read the part number marked on the unit being replaced and compare it character by character with the ordering code above, including any option suffix. Check the values in the technical specification table of this page against the nameplate on the existing unit rather than against a previous purchase record. Confirm the supply voltage: dc available at the installation site is 10 V … 30 V (Reverse-polarity protected; Limit values; max. 8 A), which is the documented requirement for this model.

Request a Quote

Autronexa supplies the DL50-2B215252 as a quote-based item. Send the part number, quantity and destination for current stock, lead time and pricing; no fixed price is published for this part.

Frequently asked questions

What is the DL50-2B215252?

SICK DL50-2B215252 is an industrial automation component we supply from surplus and refurbished stock. Confirm the exact configuration, condition and lead time with our team before purchase.

Is the DL50-2B215252 in stock, and what is the lead time?

We list the DL50-2B215252 as in stock in New Surplus condition. Request a quote for current availability, pricing and confirmed lead time — most items ship within 1–3 business days.

Do you provide a datasheet for the DL50-2B215252?

Where available, the product page links the original manufacturer datasheet (PDF). Use the request-a-quote form to receive the full documentation pack and compliance information.

Can the DL50-2B215252 be cross-referenced to an equivalent?

Many automation parts have equivalents or legacy replacements. Send us the DL50-2B215252 together with your application details and we will confirm compatibility and alternatives.

What input voltage does the DL50-2B215252 use?

The DL50-2B215252 operates at 10 V ... 30 V (Reverse-polarity protected; Limit values; max. 8 A). Verify the exact range and any hazardous-area limits against the product label before installation, because input requirements vary by ordered variant.

What are the dimensions and weight of the DL50-2B215252?

The DL50-2B215252 measures (W x H x D): 36.2 mm x 67.3 mm x 58 mm and weighs 235 g. Confirm clearance and rack or panel space before ordering.

What is the DL50-2B215252 and what is it used for?

The DL50-2B215252 is a industrial component device. It is used in industrial control and automation systems where a verified part number and specification match are required for replacement or new design.

What supply voltage does the DL50-2B215252 need?

The manufacturer documentation lists supply voltage: dc 10 V ... 30 V (Reverse-polarity protected; Limit values; max. 8 A). for this model. Confirm the supply at the installation site matches, including any tolerance on the incoming feed, before the part is ordered.

How much does the DL50-2B215252 weigh?

The documented weight is 235 g.. Use it for lifting, rail-loading and shipping decisions, and quote it when a handling study is required for the installation.

Related & compatible parts

SICK

DS500-N211

Genuine surplus SICK DS500-N211 measures up to 30 m on natural surfaces with a heated aluminum housing for…

In Stock

SICK

DL100-21HA2101

Genuine SICK DL100-21HA2101 laser distance sensor for ASRS: 15 m/s tracking, SSI output, IP65, and -40 °C heating.…

In Stock

SICK

KUP-1010-F

Genuine SICK KUP-1010-F spring-washer coupling with 10 mm bores, 0.6 N·m torque and 12,000 rpm rating. Verified surplus…

In Stock

SICK

S30A-7021EK

Genuine surplus SICK S30A-7021EK safety laser scanner with 7 m protective field, 190° scan angle and EFI bus…

In Stock

News & guides for SICK

View all articles

Request a quote for this part

Part number: DL50-2B215252

We reply within one business day.

DL50-2B215252 Quote reply within 1 business day