SICK KUP-1010-F
Encoders
Genuine SICK KUP-1010-F spring-washer coupling with 10 mm bores, 0.6 N·m torque and 12,000 rpm rating. Verified surplus stock from Autronexa.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Bore diameter (encoder side, D1) | 10 mm |
|---|---|
| Bore diameter (drive side, D2) | 10 mm |
| Coupling type | Spring washer coupling |
| Material | Aluminum flange, glass-fiber-reinforced polyamide membrane, hardened steel coupling pin |
| Nominal torque | 0.6 N·m maximum (60 Ncm per datasheet); torsion spring stiffness 30 N·m/rad |
| Max. speed | 12,000 rpm maximum |
| Axial offset compensation | max. axial shaft offset ± 0.4 mm |
| Radial/angular offset compensation | max. radial offset ± 0.3 mm; max. angular offset ± 2.5° |
| Overall length | 30 mm |
Description
The SICK KUP-1010-F is a Encoders for industrial control and automation applications.
The SICK KUP-1010-F is a spring-washer (membrane) shaft coupling for encoders, with 10 mm bores on both the encoder side and the drive side. Maintenance teams choose genuine surplus or refurbished units of this coupling to restore shaft connections quickly without waiting on OEM lead times. Autronexa supplies verified stock with practical sourcing support.
What this unit Coupling Does in an Encoder Drive Train
This coupling sits between an encoder shaft and the driven shaft, transmitting rotary motion while absorbing small misalignments. The spring-washer design uses an aluminum flange, a glass-fiber-reinforced polyamide membrane and a hardened steel coupling pin. Both bores measure 10 mm (D1 encoder side, D2 drive side), so the unit suits encoder shafts of that diameter. The overall length is 30 mm. Because the membrane flexes, the coupling compensates for shaft offset without loading the encoder bearings. That makes it a practical wear item to keep on the shelf for any line where encoders drive speed or position feedback.

Key Ratings Buyers Should Confirm
this unit carries a maximum torque capacity of 0.6 N·m (60 Ncm per datasheet) and a torsion spring stiffness of 30 N·m/rad. Maximum speed is 12,000 rpm. Offset compensation is rated at ±0.4 mm axial, ±0.3 mm radial and ±2.5° angular. These figures define the alignment window during installation, so check them against your shaft arrangement before ordering. Operating temperature, weight and mass moment of inertia are not stated in the extracted datasheet; request verified values from our sourcing team if your application depends on them.
Surplus Versus New: Why This Coupling Fits a Spares Strategy
A spring-washer coupling is a consumable in most encoder installations. When one fatigues, production stops until a replacement arrives. OEM lead times can stretch, and a full list-price purchase is hard to justify for a small mechanical part. Genuine surplus and refurbished this unit units give you a verified alternative: each unit is checked against OEM datasheet markings, and condition is confirmed before dispatch. Compared with generic aftermarket couplings, the SICK original preserves the stated torque, stiffness and offset ratings. Compared with new-from-OEM sourcing, surplus stock shortens the wait. Contact Autronexa with your part number for verified condition and current availability.

Selection and Sourcing Checklist
Before you order, confirm the bore sizes match your encoder and drive shafts at 10 mm each. Verify that the required torque stays within the 0.6 N·m maximum and that running speed stays below 12,000 rpm. Check the axial, radial and angular offset limits against your mounting tolerances. Finally, confirm the coupling type is the spring-washer design your encoder series expects. Autronexa helps with cross-referencing and condition grading so you receive a part that fits the first time.
this unit Compared With Other Encoder Coupling Types
- Spring-washer (this unit): 10 mm/10 mm bores, 0.6 N·m maximum torque, offset compensation for axial, radial and angular misalignment.
- Bellows couplings: typically chosen for higher torsional stiffness; verify torque and bore data for the specific model.
- Elastomer jaw couplings: often used where vibration damping matters; confirm bore and torque ratings per datasheet.
- Rigid couplings: no misalignment compensation; suitable only for perfectly aligned shafts.
Use this comparison to confirm this unit spring-washer design matches your alignment and torque needs before sourcing.
Frequently asked questions
Is the SICK KUP-1010-F a genuine part or a clone?
Autronexa verifies each SICK KUP-1010-F against OEM datasheet markings and part-number cross-references before listing it. Units are genuine surplus or refurbished, not grey-market copies.
What condition will the KUP-1010-F arrive in?
The SICK KUP-1010-F is supplied as refurbished stock by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask for the current condition grade when you request a quote.
How fast can Autronexa ship the KUP-1010-F?
Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus and refurbished units are ready to ship once confirmed.
Does the KUP-1010-F fit a 10 mm encoder shaft?
Yes. The SICK KUP-1010-F has a 10 mm bore on the encoder side (D1) and a 10 mm bore on the drive side (D2), with an overall length of 30 mm.
What torque and speed limits apply to the KUP-1010-F?
The SICK KUP-1010-F is rated for a maximum torque of 0.6 N·m (60 Ncm per datasheet) and a maximum speed of 12,000 rpm, with torsion spring stiffness of 30 N·m/rad.
Related & compatible parts
SICK
DL50-N2228
Genuine surplus SICK DL50-N2228 laser distance sensor with 200 mm to 50,000 mm range, 100 µm resolution and…
SICK
CLV650-6120
Genuine SICK CLV650-6120 fixed mount barcode scanner with Ethernet, oscillating mirror, and 125–1,570 mm reading distance. Verified surplus…
SICK
DL100-21HA2101
Genuine SICK DL100-21HA2101 laser distance sensor for ASRS: 15 m/s tracking, SSI output, IP65, and -40 °C heating.…
SICK
DL100-11AA2101
Genuine surplus SICK DL100-11AA2101 laser distance sensor with 60 m range, 15 m/s tracking, and SSI interface —…
News & guides for SICK
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
Motion Control Precision: Servo Loops, Fieldbus Jitter, AI
Motion control precision depends on servo loop rates, fieldbus cycle times and jitter, sensor latency and mechanics. AI sits above…
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Orbit 60 PPM (142M8515): What the Module Does and What the 90% Load Warning Means
TL;DR: The Bently Nevada Orbit 60 Protection Processing Module (PPM) is the centralized compute engine of the protection system: it…
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
Schneider Electric Product Carbon Footprint Data: What Engineers Can Look Up
TL;DR: Schneider Electric publishes product-level carbon data, but not through a single system. Product pages carry a “total life cycle…
Bently Nevada 3500/06 Weatherproof Housing: Ratings, Purging and Mounting Limits
TL;DR: The weatherproof enclosure for a Bently Nevada 3500 rack is the 3500/06, not the 3500/01 — 3500/01 is the…
Siemens Kärnten Netz Grid Software Contract: Scope and Limits
TL;DR: On 9 November 2026 Siemens announced a six-year software contract with Kärnten Netz GmbH (KNG), the Carinthian distribution system…
