SICK Sensors & Encoders

SICK KUP-0810-S

Encoders

Manufacturer: SICK Part Number: KUP-0810-S

Genuine SICK KUP-0810-S bar coupling with 8 mm and 10 mm bores, 0.8 N·m torque and 10,000 rpm rating. Verified surplus stock from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Bore diameter (encoder side, D1) 8 mm
Bore diameter (drive side, D2) 10 mm
Coupling type Bar coupling
Material Glass-fiber-reinforced polyamide, aluminum hub
Nominal torque 0.8 N·m maximum (80 Ncm per datasheet)
Max. speed 10,000 rpm maximum
Axial offset compensation max. ± 0.3 mm
Radial offset compensation max. ± 0.3 mm
Angular offset compensation max. ± 3°
Operating temperature –10 °C to +80 °C (per datasheet)

Description

The SICK KUP-0810-S is a Encoders for industrial control and automation applications.

A machine builder needed to couple an 8 mm encoder shaft to a 10 mm drive shaft without introducing measurable backlash. The SICK KUP-0810-S bar coupling solves exactly that mismatch: a glass-fiber-reinforced polyamide and aluminum hub component rated for 0.8 N·m and speeds up to 10,000 rpm. Autronexa supplies this genuine SICK accessory as verified surplus or refurbished stock for maintenance teams that need the correct part without an extended OEM wait.

What this unit Bar Coupling Does

This SICK coupling belongs to the shaft adaptation series, a family of mechanical interfaces that connect encoder shafts to driven equipment. The bar coupling design uses a flexible element to absorb small misalignments while transmitting rotary motion. Because the encoder side is 8 mm and the drive side is 10 mm, this unit bridges two different shaft diameters in one part. The body combines glass-fiber-reinforced polyamide with an aluminum hub, giving a lightweight but rigid connection. At 24 mm overall length, it fits compact mounting envelopes where space around the encoder is limited. The coupling compensates up to ±0.3 mm axial offset, ±0.3 mm radial offset and ±3° angular offset, so minor assembly tolerances do not transfer stress to the encoder bearings.

Figure 1: Front view of the SICK KUP-0810-S Encoders showing its physical design and enclosure.

Why Genuine Surplus Makes Sense for This Coupling

Couplings are wear items. When one cracks or loses torsional stiffness, the encoder signal can drift and the machine stops. Ordering a replacement through standard OEM channels can add weeks to a maintenance window. Autronexa keeps genuine surplus and refurbished SICK shaft adaptation components ready to ship, including this unit. Each unit is checked against OEM datasheet markings and functionally verified by our sourcing team before dispatch. That means you get the correct 8 mm / 10 mm bore configuration, not a lookalike with different tolerances. For plants running older SICK encoder installations, surplus stock is often the only practical route to an exact mechanical match.

Figure 2: Technical layout and connection details for the SICK KUP-0810-S Encoders.

Selection and Sourcing Checks

Before ordering, confirm the shaft diameters at both ends: 8 mm on the encoder side and 10 mm on the drive side. Verify that the torque in your application stays within the 0.8 N·m maximum and that operating temperature remains between –10 °C and +80 °C. Inspect the existing coupling for the bar coupling pattern and overall length of 24 mm. If your machine uses a different bore combination, this unit is not interchangeable. Autronexa can cross-reference your encoder model and confirm the correct accessory. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the SICK KUP-0810-S a genuine SICK part or a clone?

Autronexa verifies every SICK KUP-0810-S against OEM datasheet markings and part-number cross-references before listing it. Units come from genuine surplus or professionally refurbished stock, not from grey-market copies.

What condition will the KUP-0810-S coupling arrive in?

The SICK KUP-0810-S is supplied as refurbished stock by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available; confirm the exact condition with Autronexa before ordering.

How fast can Autronexa ship the SICK KUP-0810-S?

Lead time depends on current stock at Autronexa. Contact us with the SICK KUP-0810-S part number for verified condition and current availability; surplus and refurbished units are typically ready to ship once confirmed.

Does the KUP-0810-S fit both 8 mm and 10 mm shafts?

Yes. The SICK KUP-0810-S has an 8 mm bore on the encoder side (D1) and a 10 mm bore on the drive side (D2), so it connects two different shaft diameters in one coupling.

Related & compatible parts

SICK

DL100-12AA2103

Genuine SICK DL100-12AA2103 laser distance sensor for ASRS: 15 m/s tracking, 130 m range, RS-422. Verified surplus and…

In Stock

SICK

S30B-3011CA

Genuine SICK S30B-3011CA safety laser scanner with 8 m range and IP65 rating. Verified surplus stock for fast,…

In Stock

SICK

CLV620-0120

Genuine surplus SICK CLV620-0120 fixed mount barcode scanner with Ethernet, 60–365 mm reading range, and IP65 housing —…

In Stock

SICK

BEF-FA-036-100

Genuine SICK BEF-FA-036-100 aluminum flange adapter — verified surplus and refurbished units for 36 mm to 100 mm…

In Stock

News & guides for SICK

View all articles

Request a quote for this part

Part number: KUP-0810-S

We reply within one business day.

KUP-0810-S Quote reply within 1 business day