Schneider Electric I/O & Function Modules Advantys STB

Schneider Electric STBDDI3230

Digital input module

Manufacturer: Schneider Electric Part Number: STBDDI3230

Genuine surplus Schneider Electric STBDDI3230 2-channel digital input module for Advantys STB — verified condition, practical sourcing support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Module type Standard digital input module
Channels 2 (sink)
Signal type 24V DC, IEC/EN 61131-2 Type 2
Isolation 1500V DC field-to-bus for 1 minute
Hot swapping Yes
Supply voltage 24V DC (via PDM)
Bus current 60 mA @5V DC
I/O base STBXBA1000 (13.9 mm)
PDM STBPDT3100 (24V DC)
Protection rating IP20
Weight 0.110 kg

Description

The Schneider Electric STBDDI3230 is a standard 2-channel digital input module for the Advantys STB distributed I/O system. Maintenance and automation teams running legacy STB installations need a genuine replacement when an input channel fails, and this discontinued module is exactly the kind of part Autronexa verifies and supplies as surplus or refurbished stock.

What This Module Does in an STB System

The STBDDI3230 accepts two sink-type digital signals at 24V DC, rated to IEC/EN 61131-2 Type 2. That Type 2 rating matters in practice: it defines the input current and threshold behaviour expected from industrial sensors, so the module behaves predictably with standard 24V DC field devices rather than drifting at the switching margin. Field-to-bus isolation is rated at 1500V DC for one minute, which separates the field wiring from the bus electronics. Hot swapping is supported, so a failed channel can be replaced without shutting down the rest of the island. The module draws 60 mA at 5V DC from the bus and sits on the STBXBA1000 I/O base (13.9 mm wide), powered through the STBPDT3100 24V DC PDM. It carries an IP20 protection rating and weighs 0.110 kg.

Figure 1: Front view of the Schneider Electric STBDDI3230 Digital input module showing its physical design and enclosure.

Surplus Advantage: Why This Part Still Matters

Schneider Electric lists This unit as discontinued, superseded by the Modicon X80 range (last verified 2026-09). For plants still running Advantys STB islands, that status is the real sourcing problem: the platform is no longer the current line, so OEM-channel availability is limited and a migration to X80 is a project, not a quick fix. A verified surplus or refurbished module keeps the existing island running while a migration is planned on your schedule. Autronexa supplies units tested against OEM datasheet specifications and functionally verified by our sourcing team, so you receive a genuine part with known condition rather than an untested pull. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the Schneider Electric STBDDI3230 Digital input module.

Selection and Sourcing Guide

Before you order, confirm the exact model on the failed unit and check that your island uses the STBXBA1000 base and STBPDT3100 PDM, since the module is designed around that combination. Decide whether your application needs surplus or refurbished condition and ask for the condition grading in writing. Compare the alternatives below before committing:

  • Genuine surplus or refurbished (Autronexa): correct Advantys STB form factor, verified condition, no re-engineering.
  • Modicon X80 migration: supported platform, but requires new hardware, wiring review, and engineering time.
  • Grey-market pulls: lower upfront cost, but no verification of authenticity or function.

Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: STBDDI3230-datasheet.pdf

Frequently asked questions

Is this a genuine Schneider Electric STBDDI3230, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished modules, not grey-market copies.

What condition will the module arrive in?

Units are supplied in the site default condition, refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us for the condition grading on the specific unit before ordering.

How fast can you ship the STBDDI3230?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability on this discontinued Advantys STB module.

Does this module work with my existing Advantys STB island?

It is designed for the STBXBA1000 I/O base (13.9 mm) and STBPDT3100 24V DC PDM. Confirm your island uses that base and PDM combination before ordering.

Is the STBDDI3230 still supported by Schneider Electric?

Schneider Electric lists it as discontinued and superseded by the Modicon X80 range (last verified 2026-09). Contact Autronexa to verify current OEM support status and availability.

Related & compatible parts

Schneider Electric

170DDI16001

Genuine surplus Schneider Electric 170DDI16001 Modicon Momentum 16-channel 24V DC input module — verified condition, ready to ship.

In Stock

Schneider Electric

140ACI05100SC

Genuine surplus Schneider Electric 140ACI05100SC input module — 32-point, 12/16-bit resolution, verified condition and ready to ship.

In Stock

Schneider Electric

170INT11001

Genuine surplus Schneider Electric 170INT11001 INTERBUS-S adapter for Modicon Momentum I/O — verified condition, ready to ship.

In Stock

Schneider Electric

BMXDDO1612

Genuine surplus BMXDDO1612: 16-channel 24V DC transistor output module for Modicon X80, verified and ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: STBDDI3230

We reply within one business day.

STBDDI3230 Quote reply within 1 business day