Vibro Meter Cables & Connectors

Vibro Meter 111-902-000-013 A1-B1-C042-D2-E500-F2-G050-H05

Cable length

Manufacturer: Vibro Meter Part Number: 111-902-000-013 A1-B1-C042-D2-E500-F2-G050-H05

Genuine surplus Vibro Meter 111-902-000-013 proximity cable, 5 m total length with 500 mm integral cable, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Type Proximity Measuring System
Total System Length 5 m
Integral Cable Length 500 mm ±50 mm
Body Thread M10 × 1
Body Length 42 mm
Flexible Hose Length 50 mm
Protection Rating IP68 (sensor head)
Weight 0.22 kg

Description

The Vibro Meter 111-902-000-013 A1-B1-C042-D2-E500-F2-G050-H05 is a proximity measuring system cable assembly with a 5 m total system length and a 500 mm integral cable. Maintenance teams and automation engineers source this genuine surplus unit to restore non-contact eddy-current measurement without waiting on OEM lead times. Autronexa verifies each assembly against OEM datasheet markings before it ships.

What This Proximity Cable Assembly Does

This cable connects a TQ902 proximity sensor to an IQS900 signal conditioner within a vibro-meter measurement chain. The 500 mm integral cable length and 5 m total system length suit installations where the sensor sits close to the machine casing but the conditioner lives in a remote cabinet. Because the assembly uses FEP-covered 70 Ω coaxial cable with a Ø3.6 mm profile, it carries the high-frequency signal that eddy-current measurement depends on. A self-locking miniature coaxial connector at each end keeps the chain mechanically stable. For buyers, the practical cost benefit is avoiding a full-chain replacement when only the cable section has failed.

Figure 1: Front view of the Vibro Meter 111-902-000-013 A1-B1-C042-D2-E500-F2-G050-H05 Cable length showing its physical design and enclosure.

Key Specifications and Cost Implications

The 5 m total system length directly affects installation cost. Longer chains reduce the need for intermediate junction boxes, which lowers material and labour spend. The 500 mm integral cable gives enough slack for sensor mounting without excess cable that could chafe. The M10 × 1 body thread and 42 mm body length match standard mounting holes, so no adapter machining is required. The flexible hose with FEP sheath, 50 mm long, protects the cable at the sensor exit point. That protection resists chemicals and moisture, which extends service life and reduces repeat purchase frequency. Finally, the IP68 rating on the sensor head supports washdown environments, cutting unplanned downtime from water ingress.

Surplus Advantage for This Vibro Meter Assembly

Genuine surplus and refurbished Vibro Meter assemblies offer a practical alternative to OEM list pricing. This unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Because the 111-902-000-013 configuration includes a specific 5 m chain length and 500 mm integral cable, buyers avoid the cost of custom-length orders. Autronexa holds stock of genuine surplus components, so lead times are typically shorter than factory orders. Each assembly is inspected for connector integrity and cable continuity before dispatch. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Vibro Meter 111-902-000-013, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference. This is a genuine Vibro Meter assembly, not a copy.

What condition will the 111-902-000-013 arrive in?

This unit is supplied as refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team.

How fast can you ship the 111-902-000-013?

Contact Autronexa for current lead time. Surplus stock is held ready to ship, subject to availability at the time of order.

Does this cable work with a TQ902 sensor and IQS900 conditioner?

Yes. The assembly is configured for the TQ902 proximity sensor and requires a high-frequency power source from an IQS900 signal conditioner.

Related & compatible parts

Vibro Meter

143-216-000-011

Genuine surplus Vibro Meter 143-216-000-011 cable for CP 216 piezoelectric pressure transducers, verified and ready for dynamic pressure…

In Stock

Latest news & guides

View all articles

Request a quote for this part

Part number: 111-902-000-013 A1-B1-C042-D2-E500-F2-G050-H05

We reply within one business day.

111-902-000-013 A1-B1-C042-D2-E500-F2-G050-H05 Quote reply within 1 business day