Vibro Meter Cables & Connectors

Vibro Meter 111-412-000-013-A1-B1-E050-F2-G050-H05

Cable length

Manufacturer: Vibro Meter Part Number: 111-412-000-013-A1-B1-E050-F2-G050-H05

Genuine surplus Vibro Meter 5 m proximity measuring system with M10 × 1 body thread, FEP-sheathed flexible hose, and IP68 transducer head.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Body thread M10 × 1
Integral cable length 5.0 m ±500 mm
Flexible hose length 5.0 m
Optional protection Flexible hose with FEP sheath
Transducer head protection IP68
Cable type FEP covered 70 Ω coaxial cable, Ø3.6 mm
Connectors Self-locking miniature coaxial connectors
Operating temperature (cable, connector, protection) −40 to +200 °C
Weight 0.22 kg

Description

How do you keep a machinery protection chain accurate when the original cable assembly is no longer stocked? The Vibro Meter 111-412-000-013-A1-B1-E050-F2-G050-H05 is a 5 m proximity measuring system built for shaft vibration and position measurement, and Autronexa supplies it as a verified genuine surplus unit for maintenance and condition-monitoring teams.

What This Vibro Meter Proximity System Does

This assembly is a non-contact eddy-current measuring chain. The transducer body uses an M10 × 1 thread, and the integral cable runs 5.0 m ±500 mm. A flexible stainless steel hose with an FEP sheath covers the same 5.0 m length, giving the cable mechanical protection and chemical resistance. The transducer head is rated IP68, so the tip and integral cable tolerate wet and dusty plant environments. The system suits API 670 measurement chains and works with VM600Mk2/VM600 and VibroSmart machinery monitoring systems. The 70 Ω coaxial cable ends in self-locking miniature coaxial connectors, which should be hand-tightened until locked.

Figure 1: Front view of the Vibro Meter 111-412-000-013-A1-B1-E050-F2-G050-H05 Cable length showing its physical design and enclosure.

Why Genuine Surplus Fits This Measuring Chain

A proximity system is only as good as its calibration and cable integrity. A clone cable can shift the gap voltage and distort the vibration signal. Autronexa sources genuine Vibro Meter surplus and refurbished assemblies, checks markings against OEM datasheet references, and confirms condition before dispatch. That matters when a plant needs a replacement chain without waiting on a full OEM lead time. The 5 m total system length and the FEP-sheathed hose are fixed in this configuration, so the part number itself confirms the cable run you need. Each unit is verified functionally, and the sourcing team can answer questions about connector condition and cable continuity.

Figure 2: Technical layout and connection details for the Vibro Meter 111-412-000-013-A1-B1-E050-F2-G050-H05 Cable length.

Selection and Sourcing Checks

Before ordering, confirm the system length and thread match your installation. This variant carries the 050 cable code for 5.0 m and the B1 code for M10 × 1. The F2 option adds the flexible hose with FEP sheath, and the G050 code sets that hose at 5.0 m. Also check that your signal conditioner is an IQS900 or equivalent high-frequency source, because the transducer requires that input. Verify the operating temperature at your measurement point: the cable, connector and optional protection are rated −40 to +200 °C. Finally, confirm whether your area needs an Ex-certified version, since this configuration is marked Standard environment. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this Vibro Meter 111-412-000-013-A1-B1-E050-F2-G050-H05 a genuine part or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-references before listing it. This assembly is supplied as genuine surplus, not as a grey-market copy.

What condition will the proximity system arrive in?

Units are supplied refurbished and functionally verified by our sourcing team. Contact Autronexa for the current condition grade and any specific inspection details for this part number.

How fast can Autronexa ship the 111-412-000-013-A1-B1-E050-F2-G050-H05?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability before committing to a maintenance window.

Does this 5 m system work with VM600 and VibroSmart monitoring systems?

The datasheet lists this proximity system as suitable for VM600Mk2/VM600 and VibroSmart machinery monitoring systems. It requires a high-frequency power source from an IQS900 signal conditioner.

Related & compatible parts

Vibro Meter

444-311-000-023

Vibro Meter 444-311-000-023 Vibration Monitoring. Sensitivity: 50 µA/g; Frequency response: 2 to 8000 Hz. New surplus stock, ships…

Available on request

Vibro Meter

111-912-000-011-A1-B6-E5000-F0-G0-H05

Genuine Vibro Meter TQ912 proximity sensor with 5000 mm integral cable, 3/8″-24UNF thread, IP68, and 5 m total…

In Stock

Latest news & guides

View all articles

Request a quote for this part

Part number: 111-412-000-013-A1-B1-E050-F2-G050-H05

We reply within one business day.

111-412-000-013-A1-B1-E050-F2-G050-H05 Quote reply within 1 business day