Vibro Meter Cables & Connectors

Vibro Meter 111-412-000-013-A2-B1-E010-F0-G000-H05

Cable length

Manufacturer: Vibro Meter Part Number: 111-412-000-013-A2-B1-E010-F0-G000-H05

Genuine surplus Vibro Meter 5 m proximity measuring system with Ex i rating, M10 × 1 thread and 1.0 m integral cable, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Environment (A) 2 = Explosive Ex i
Body thread (B) 1 = M10 × 1
Integral cable length (E) 010 = 1.0 m ±100 mm
Optional protection (F) 0 = None
Flexible hose length (G) 000 = None
Total system length (H) 05 = 5 m
Weight 0.22 kg
Transducer head protection rating IP68

Description

When a turbine shaft needs continuous position feedback inside a hazardous zone, the measurement chain must be both accurate and certified. The Vibro Meter 111-412-000-013-A2-B1-E010-F0-G000-H05 proximity measuring system solves that challenge with an Ex i rating, a 5 m total system length and a 1.0 m integral cable. Autronexa supplies this genuine surplus unit as a practical alternative to long OEM lead times.

What This Proximity Measuring System Does

This Meggitt Vibro-Meter eddy-current transducer measures shaft relative vibration and gap or position without contact. Its 5 m total system length lets you route the signal from the machine casing to the monitoring cabinet. The M10 × 1 body thread mounts directly into the machine housing, while the 1.0 m integral cable runs from the transducer tip to the first connector. The head is rated IP68, so it tolerates washdown and temporary immersion at the probe tip. Because the unit carries an Ex i environment rating, it suits potentially explosive atmospheres where standard probes cannot be installed.

Figure 1: Front view of the Vibro Meter 111-412-000-013-A2-B1-E010-F0-G000-H05 Cable length showing its physical design and enclosure.

Why Genuine Surplus Fits This Measurement Chain

A proximity measuring system is only as reliable as its calibration and materials. This unit uses a Torlon tip and an AISI 316L stainless steel body. The FEP-covered 70 Ω coaxial cable is Ø3.6 mm and terminates in self-locking miniature coaxial connectors. Autronexa sources genuine surplus and refurbished Vibro Meter components, and each unit is checked against OEM datasheet markings before dispatch. For maintenance teams facing an obsolete or hard-to-find configuration, surplus stock often shortens the wait compared with a factory order. The 0.22 kg weight and compact cable assembly also simplify handling during replacement.

Figure 2: Technical layout and connection details for the Vibro Meter 111-412-000-013-A2-B1-E010-F0-G000-H05 Cable length.

Sourcing Guidance for This Configuration

Before ordering, confirm the full configuration code matches your application. This variant has environment code A2 for Ex i, body thread B1 for M10 × 1, integral cable length E010 for 1.0 m, no optional protection (F0), no flexible hose (G000) and a total system length H05 for 5 m. Because the transducer requires a high-frequency power source from an IQS900 signal conditioner, verify that your existing conditioner is compatible. Also check that the 5 m total length reaches your monitoring cabinet without strain on the connectors. Autronexa can help cross-check the part number and discuss current condition and availability.

Frequently asked questions

Is this Vibro Meter 111-412-000-013-A2-B1-E010-F0-G000-H05 a genuine unit or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference. This is a genuine Vibro Meter proximity measuring system, not a copy.

What condition will the 111-412-000-013-A2-B1-E010-F0-G000-H05 arrive in?

It is supplied as genuine surplus or refurbished stock, functionally checked and graded before dispatch. Contact Autronexa for the current condition grade of this specific unit.

How fast can Autronexa ship this proximity measuring system?

Lead time depends on current stock. Contact Autronexa with the part number for verified availability and the earliest ship date.

Does this system work with a VM600 or VibroSmart monitoring cabinet?

The datasheet lists VM600Mk2, VM600 and VibroSmart systems as ideal companions. The transducer needs a high-frequency power source from an IQS900 signal conditioner, so confirm your conditioner model before ordering.

Related & compatible parts

Vibro Meter

143-216-000-011

Genuine surplus Vibro Meter 143-216-000-011 cable for CP 216 piezoelectric pressure transducers, verified and ready for dynamic pressure…

In Stock

Latest news & guides

View all articles

Request a quote for this part

Part number: 111-412-000-013-A2-B1-E010-F0-G000-H05

We reply within one business day.

111-412-000-013-A2-B1-E010-F0-G000-H05 Quote reply within 1 business day