Woodward I/O & Function Modules

Woodward 5466-253

Analog Combo Module

Manufacturer: Woodward Part Number: 5466-253

Genuine surplus Woodward 5466-253 analog combo module with 4 speed sensor inputs, 8 analog inputs and 5 ms update time — verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Type Analog Combo Module
Speed Sensor Inputs 4 channels
Analog Inputs 8 channels
Analog Outputs 4 channels
Proportional Actuator Driver Outputs 2 channels, configurable 4-20 mA or 20-160 mA
Analog Input Range 0-25 mA
Update Time 5 ms
Common Mode Rejection 200 Vdc
Country of Manufacture United States (USA)
Availability In Stock

Description

The Woodward 5466-253 Analog Combo Module consolidates four speed sensor inputs, eight analog inputs, four analog outputs and two proportional actuator driver outputs in one unit. For maintenance and procurement teams, sourcing a genuine surplus unit keeps a running control system supported without waiting on a full OEM lead time.

What the 5466-253 Module Does in a Control System

This unit is an analog combo module developed by Woodward for control systems that must read speed and analog process signals and drive proportional actuators from a single slot position. Its four speed sensor inputs accept both magnetic pick-up and proximity probe types, so one module covers the speed measurement needs of different rotating machinery. Eight analog input channels handle current-type signals, while four analog outputs and two proportional actuator driver outputs complete the I/O set. Because these functions share one unit, wiring runs and termination points are reduced, which lowers installation effort and removes potential failure points from the cabinet. The module is manufactured in the United States.

Figure 1: Front view of the Woodward 5466-253 Analog Combo Module showing its physical design and enclosure.

Technical Specs and Their Cost Implications

The 5 ms update time applies across the module’s channels, giving the control loop a consistent sampling cadence rather than a mix of fast and slow points. Each analog input carries a 200 ohm resistor across its terminals, and the inputs provide 200 Vdc of common mode rejection, which keeps measurement stable where common-mode noise is present. The 0-25 mA input range covers standard current transducers, including two-wire ungrounded loop-powered and isolated self-powered types. For actuator outputs, each of the two proportional driver channels is configurable for 4-20 mA or 20-160 mA operation, so the same module can drive different proportional devices without a second card. Fewer module types in the spares inventory means lower carrying cost and simpler stocking decisions.

Figure 2: Technical layout and connection details for the Woodward 5466-253 Analog Combo Module.

Surplus and Refurbished Advantage for This Module

A genuine surplus or refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. For a module that combines speed inputs, analog I/O and actuator drivers, that verification matters because a single failed channel can take an entire loop offline. Surplus sourcing also avoids the long lead times that can follow when a current-production module is ordered through standard OEM channels. Autronexa holds verified surplus and refurbished automation components across Woodward and other major brands, and the team can confirm condition, revision markings and current availability against your exact part number. The module is listed as in stock, so buyers can move from identification to a sourcing decision without a lengthy quote cycle.

Sourcing Checklist Before You Order

Confirm the exact model number and any revision markings on the existing module before ordering a replacement. Check whether your transducers are two-wire loop-powered or isolated self-powered, since both connect to the analog inputs but the wiring differs. If a non-isolated device can reach over 200 Vdc with respect to the control’s common, plan for a loop isolator to break return current paths. Verify that the proportional actuators match the 4-20 mA or 20-160 mA driver configuration you intend to use. Finally, confirm the condition grade you need — surplus or refurbished — and ask for the verification record. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 5466-253-datasheet.pdf

Frequently asked questions

Is the Woodward 5466-253 a genuine module or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it is listed. The 5466-253 is supplied as genuine surplus or refurbished stock, not as a grey-market copy.

What condition will the 5466-253 arrive in?

Units are supplied in refurbished condition, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the specific condition grade and verification record on current stock.

How fast can Autronexa ship the 5466-253?

The module is listed as in stock. Contact Autronexa with your part number for current lead time and shipping details to your location.

Which transducer types connect to the 5466-253 analog inputs?

The analog inputs accept current-type signals over a 0-25 mA range, including two-wire ungrounded loop-powered transducers and isolated self-powered transducers. Inputs provide 200 Vdc of common mode rejection and carry a 200 ohm resistor across each input.

Can the 5466-253 drive different proportional actuators?

Yes. Each of the two proportional actuator driver outputs is configurable for either 4-20 mA or 20-160 mA operation, allowing the module to control different proportional devices without adding a second driver card.

Related & compatible parts

Woodward

5466-258

Genuine Woodward 5466-258 Discrete I/O Module with 48 inputs and 24 outputs, surplus and refurbished, verified and ready…

In Stock

Woodward

5464-648

Genuine surplus Woodward 5464-648: 8-channel 4-20mA analog output module for gas turbine control systems, verified and ready to…

In Stock

Woodward

5466-352

Genuine surplus Woodward 5466-352 Netcon CPU-040, in stock and verified for reliable control system performance.

In Stock

Woodward

5466-355

Genuine Woodward 5466-355 Remote Chassis Transceiver for CPU 68040 systems, verified surplus with clear lead times from Autronexa.

In Stock

News & guides for Woodward

View all articles

Request a quote for this part

Part number: 5466-253

We reply within one business day.

5466-253 Quote reply within 1 business day