Woodward PLCs & Controllers

Woodward 5466-1001

Digital Controller Power Supply Module

Manufacturer: Woodward Part Number: 5466-1001

Genuine surplus Woodward 5466-1001 power supply module with 24VDC 16A output, current sharing, and four diagnostic LEDs. Verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Output Voltage Rating 24VDC, 16A
Network Isolation 0-60 Hz: 1000 Vrms
Speed Sensing 1 to 30 Vac
Maximum Stub Length 300 mm
Dimensions H461mm x W265mm x D59mm
Weight 22 kg in Chassis
Availability In Stock

Description

The Woodward 5466-1001 is a Digital Controller Power Supply Module for MicroNet series controllers, rated 24VDC at 16A with current-sharing circuitry that balances load across redundant supplies. Maintenance teams and system integrators turn to genuine surplus units like this when a failed supply threatens controller uptime and OEM lead times stretch. Autronexa supplies verified surplus and refurbished automation parts with clear condition notes and practical sourcing support.

What the 5466-1001 Does in a MicroNet System

This module sits in the controller chassis and converts input power into the regulated 24VDC rail that the control system depends on. Its current-sharing design lets two supplies split the load equally, which reduces heat and improves reliability. If one supply fails, the other carries the full load so you can replace the failed unit while the control keeps running. Four front-panel LEDs report OK, Input Fault, Overtemperature, and Power Supply Fault status, giving technicians a fast way to isolate power problems before they escalate.

Figure 1: Front view of the Woodward 5466-1001 Digital Controller Power Supply Module showing its physical design and enclosure.

Key Ratings at a Glance

This unit delivers 24VDC at 16A, enough to support a chassis populated with multiple modules. Its network isolation rating of 1000 Vrms across 0-60 Hz helps protect control signals from electrical noise. Speed sensing accepts 1 to 30 Vac, and the module supports a maximum stub length of 300 mm for connected wiring. Physical dimensions are H461mm x W265mm x D59mm, and the unit weighs 22 kg when installed in its chassis.

Figure 2: Technical layout and connection details for the Woodward 5466-1001 Digital Controller Power Supply Module.

Surplus Sourcing Comparison

Buyers weighing options for a replacement supply can compare typical routes:

  • New from OEM: full list price and potentially long lead times for legacy MicroNet hardware.
  • Grey-market vendors: lower cost but uncertain authenticity and no condition verification.
  • Autronexa surplus and refurbished: genuine parts, verified against OEM datasheet markings, with clear condition notes and current availability confirmed before you order.

For a module tied to turbine or engine control uptime, verified condition matters more than a marginal price difference. Autronexa checks each unit and confirms what you are receiving before it ships.

Selection and Sourcing Guide

Before ordering, confirm the exact model number and revision your chassis requires, and note whether your system uses simplex or redundant supplies. Verify that the replacement matches the slot configuration and connector layout of your existing unit. When specifying a redundant pair, remember that each supply must handle the full load alone, and avoid feeding both supplies from a single source. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 5466-1001-datasheet.pdf

Frequently asked questions

Is this a genuine Woodward 5466-1001 or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-references. The 5466-1001 we supply is a genuine Woodward module, not a copy.

What condition will the 5466-1001 arrive in?

Units are supplied as refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the specific condition grade of current stock.

How fast can you ship the Woodward 5466-1001?

The 5466-1001 is listed as in stock. Contact Autronexa for current lead time and shipping options for your location.

Can the 5466-1001 be replaced while the control is running?

Yes. The current-sharing circuitry allows a failed supply to be replaced while the control remains running, provided the redundant supply can carry the full load.

Related & compatible parts

Woodward

5464-213

Genuine surplus Woodward 5464-213 Netcon Serial I/O Module for 5400 Series turbine control, verified and ready to ship…

In Stock

Woodward

5466-348

Genuine surplus Woodward 5466-348 Netcon SIO Module with three RS-485 ports, 417 kbaud, and a 5 ms rate…

In Stock

Woodward

5464-545

Genuine surplus Woodward 5464-545 power module: 85–265V AC input, 15kW peak output, 14-bit control. Verified condition and clear…

In Stock

Woodward

5464-334

Genuine surplus Woodward 5464-334 isolated analog input module with 3000 VDC isolation and 8 channels for turbine control…

In Stock

News & guides for Woodward

View all articles

Request a quote for this part

Part number: 5466-1001

We reply within one business day.

5466-1001 Quote reply within 1 business day