Woodward I/O & Function Modules

Woodward 5466-348

Netcon SIO Module

Manufacturer: Woodward Part Number: 5466-348

Genuine surplus Woodward 5466-348 Netcon SIO Module with three RS-485 ports, 417 kbaud, and a 5 ms rate group. Verified condition and clear lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Protocol RS-485 UART
Baud Rate 417 kbaud
Data Bits 8
Parity None
Stop Bit 1
Rate Group One driver per port, 5 milliseconds
Country of Manufacture United States (USA)

Description

The Woodward 5466-348 is a Netcon SIO Module that links three RS-485 UART ports to EM or GS/LQ Digital Actuator Drivers at 417 kbaud. Engineers maintaining Woodward Netcon systems choose genuine surplus or refurbished units for verified condition and practical lead times.

What the 5466-348 Does in a Netcon System

This module acts as the serial interface between the control and the digital actuator drivers. Each of its three RS-485 ports supports one driver, and every port can operate at a different rate group. This unit allows one driver per port every 5 milliseconds, so critical parameters update quickly. Communication faults are detected per driver, and drivers with comm faults are disabled. The module also supports remote monitoring of driver parameters and remote driver parameter configuration. Because the address switches on each driver must match the driver number in the GAP application program, correct addressing is essential during commissioning. This unit can send position demand and configuration information while monitoring status outputs. In configurations where position demand comes from a 4-20 mA input or the CAN bus interface, the module still configures the driver and monitors its status outputs. It can also be used only to monitor status outputs when configuration and demand are generated elsewhere.

Figure 1: Front view of the Woodward 5466-348 Netcon SIO Module showing its physical design and enclosure.

Why Genuine Surplus Fits This Woodward Module

Woodward Netcon systems often stay in service well beyond typical OEM distribution cycles. As a result, sourcing a genuine unit through surplus and refurbished channels can be more practical than waiting on a factory order. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, then functionally verifies it before dispatch. This approach gives maintenance teams a verified spare without the uncertainty of unmarked grey-market stock. The module is manufactured in the United States, and its RS-485 UART interface is fixed at 417 kbaud with 8 data bits, no parity, and 1 stop bit. Those fixed parameters make exact model matching important when replacing a failed unit.

Figure 2: Technical layout and connection details for the Woodward 5466-348 Netcon SIO Module.

Sourcing Guidance for This unit

Before ordering, confirm that your GAP application program expects the driver numbers assigned to this module’s three ports. Check that each actuator driver’s address switches match those numbers. Verify the rate group requirement for each port, since This unit allows one driver per port every 5 milliseconds. Confirm the condition you need, whether surplus or refurbished, and request the verification details for the specific unit. Because the module supports both monitoring and control roles depending on system architecture, state your intended use so the sourcing team can confirm the configuration. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 5466-348-datasheet.pdf

Frequently asked questions

Is this a genuine Woodward 5466-348 or a clone?

Autronexa verifies each 5466-348 against OEM datasheet markings and part-number cross-reference before listing it. Units are genuine Woodward surplus or refurbished modules, not copies.

What condition will the 5466-348 arrive in?

Units are supplied as refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa to confirm the condition of the specific unit in stock.

How fast can you ship the 5466-348?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability of the 5466-348 before placing your order.

Does the 5466-348 work with EM or GS/LQ Digital Actuator Drivers?

Yes. Each of the three RS-485 ports is intended for use with EM or GS/LQ Digital Actuator Drivers, with one driver per port and a 5 millisecond rate group. The driver address switches must match the driver number in the GAP application program.

Related & compatible parts

Woodward

5466-1001

Genuine surplus Woodward 5466-1001 power supply module with 24VDC 16A output, current sharing, and four diagnostic LEDs. Verified…

In Stock

Woodward

5464-334

Genuine surplus Woodward 5464-334 isolated analog input module with 3000 VDC isolation and 8 channels for turbine control…

In Stock

Woodward

5466-352

Genuine surplus Woodward 5466-352 Netcon CPU-040, in stock and verified for reliable control system performance.

In Stock

Woodward

5466-355

Genuine Woodward 5466-355 Remote Chassis Transceiver for CPU 68040 systems, verified surplus with clear lead times from Autronexa.

In Stock

News & guides for Woodward

View all articles

Request a quote for this part

Part number: 5466-348

We reply within one business day.

5466-348 Quote reply within 1 business day