FANUC Power Supplies FANUC System 3/5/6 CNC
FANUC A02B-0047-K102
Power supply protection
Genuine surplus FANUC A02B-0047-K102 fuse kit with main element and alarm fuse for System 3/5/6 CNC power supply protection.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Series | FANUC System 3/5/6 CNC |
|---|---|
| Contents | Main element fuse + alarm fuse |
| Weight | ~0.05 kg (supplier-reported) |
| Lifecycle | Legacy spare for early FANUC CNC generations |
| Electrical rating | Not applicable (passive fuse kit) |
| Network interface | Not applicable (passive fuse kit) |
Description
The FANUC A02B-0047-K102 is a fuse kit for FANUC System 3/5/6 CNC power supply protection, supplied as a main element fuse plus an alarm fuse. Maintenance teams and repair shops buy this kit to restore protection on legacy CNC hardware without paying OEM new-spare prices, and Autronexa verifies each unit before dispatch.
What the A02B-0047-K102 Kit Protects
The kit belongs to the FANUC System 3/5/6 CNC family, an early generation of FANUC controls that still runs in many workshops. Its job is straightforward: the main element fuse carries the protection function, while the alarm fuse provides a visible indication when a fault occurs. Because both parts are supplied together, a single order covers the full replacement task and avoids a second shipment. The kit weighs approximately 0.05 kg, so it is light to store and inexpensive to ship. No fieldbus or network interface is involved, which keeps installation simple and removes configuration cost from the repair budget.

Why Surplus and Refurbished Makes Sense Here
FANUC lists this kit as a legacy spare for early CNC generations, and it now circulates mainly through aftermarket channels. That lifecycle position changes the buying calculation. An OEM new-spare route can mean long lead times for a low-cost consumable, while a verified surplus kit is ready to ship and keeps the machine’s protection circuit complete. Autronexa sources genuine parts and checks each kit against OEM datasheet markings and part-number cross-reference, so the contents match the published configuration: one main element fuse and one alarm fuse. For a maintenance budget, the saving is practical rather than dramatic, but it removes the risk of holding a CNC idle over a small protective component.

Sourcing Checks Before You Order
Buyers should confirm three things. First, verify the model number unit against the CNC control in question, since the kit is tied to the System 3/5/6 family. Second, confirm the contents are the main element fuse plus the alarm fuse, because a single-fuse substitute will not complete the protection circuit. Third, agree the condition and lead time in writing. Autronexa supplies surplus and refurbished, ready to ship, and the sourcing team can answer technical questions across FANUC and other automation brands. Contact Autronexa with your part number for verified condition and current availability.
Frequently asked questions
Is the A02B-0047-K102 a genuine FANUC fuse kit or a copy?
Autronexa verifies each kit against OEM datasheet markings and part-number cross-reference before dispatch. The kit is supplied as a main element fuse plus an alarm fuse, matching the published configuration.
What condition will the fuse kit arrive in?
Autronexa supplies surplus and refurbished automation components. Contact the sourcing team with your part number to confirm the condition grade and current availability for this kit.
How fast can Autronexa ship the A02B-0047-K102?
Lead time depends on current stock. Contact Autronexa for the present lead time and availability before placing your order.
Which FANUC CNC systems use this fuse kit?
The kit is listed for the FANUC System 3/5/6 CNC family. Confirm the model number against your control before ordering, because the kit is tied to that generation.
Related & compatible parts
FANUC
A02B-0050-0032
Genuine surplus FANUC A02B-0050-0032 numeric display monitor unit for early CNC operator interfaces, verified and ready to ship.
FANUC · FANUC System 3/5/6 CNC
A02B-0047-C920
Genuine surplus FANUC A02B-0047-C920 axial fan unit for System 3/5/6 CNC — verified condition, practical sourcing support, ready…
FANUC
A02B-0047-C800
Genuine surplus FANUC A02B-0047-C800 terminator kit with 20-pin male connector, rated -40 to 105°C. Verified condition and practical…
FANUC · FANUC System 3/5/6 CNC
A02B-0047-C902
Genuine surplus FANUC A02B-0047-C902 cooling fan unit for System 3/5/6 CNC cabinets, verified and ready to ship from…
News & guides for FANUC
FANUC CRX-3iA and P-55/15-21A at FABTECH 2026: What Maintenance Teams Should Stock
In short: FANUC America put two new machines on the FABTECH 2026 floor — the 11 kg CRX-3iA collaborative robot…
FANUC spare parts: buying guide, series overview and how to order
FANUC spare parts buying guide: 4 parts online, popular series, condition options and how our RFQ process works.
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Orbit 60 PPM (142M8515): What the Module Does and What the 90% Load Warning Means
TL;DR: The Bently Nevada Orbit 60 Protection Processing Module (PPM) is the centralized compute engine of the protection system: it…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
Motion Control Precision: Servo Loops, Fieldbus Jitter, AI
Motion control precision depends on servo loop rates, fieldbus cycle times and jitter, sensor latency and mechanics. AI sits above…
Schneider Electric Product Carbon Footprint Data: What Engineers Can Look Up
TL;DR: Schneider Electric publishes product-level carbon data, but not through a single system. Product pages carry a “total life cycle…
