FANUC I/O & Function Modules

FANUC A02B-0050-C032

Display: 9-inch monochrome CRT

Manufacturer: FANUC Part Number: A02B-0050-C032

Genuine surplus FANUC A02B-0050-C032 9-inch monochrome CRT/MDI unit for System 6T CNC, verified and available through Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Display 9-inch monochrome CRT
Input MDI keyboard unit
Compatible with FANUC System 6T
Series FANUC System 6 CNC
Weight ~4.50 kg
Relative humidity 75%RH or less, no condensation

Description

The FANUC A02B-0050-C032 is a 9-inch monochrome CRT/MDI operator interface unit for the FANUC System 6T CNC, combining the display and MDI keyboard in one assembly. For maintenance teams keeping legacy System 6T machines productive, a verified surplus or refurbished unit is often the most practical route to restoring the operator station without waiting on OEM lead times.

What This Unit Does on a System 6T

The A02B-0050-C032 serves as the primary operator interface for the FANUC System 6T control. It presents CNC status and data on a 9-inch monochrome CRT while the integrated MDI keyboard unit handles manual data input. Because the display and keyboard are supplied as one assembly, replacing a failed CRT or worn keypad means swapping the complete unit rather than servicing individual components in the field. The unit interfaces to the CNC main unit through internal CRT/MDI signal cables, so there is no external fieldbus protocol to configure. This simplifies service: the maintenance task is a physical replacement and cable reconnection, not a network commissioning exercise. For plants running early FANUC CNC generations, keeping a known-good spare on the shelf is a practical way to reduce the risk of an operator station failure stopping production.

Figure 1: Front view of the FANUC A02B-0050-C032 Display: 9-inch monochrome CRT showing its physical design and enclosure.

Surplus Advantage for Legacy FANUC Hardware

The System 6 CNC family is a legacy generation, superseded by later i-series controls. Sourcing this unit new from the OEM is therefore not a straightforward path for most maintenance departments. Genuine surplus and refurbished units fill that gap. Each unit offered through Autronexa is verified against OEM datasheet markings and part-number cross-reference, then functionally checked by our sourcing team before dispatch. That means you receive a unit that matches the order code and is fit for installation, not an untested pull. Because these assemblies are heavy for their size at approximately 4.50 kg, careful handling and secure mounting matter during installation. Autronexa provides practical sourcing support across FANUC and other major automation brands, so you can confirm condition and current availability before committing.

Figure 2: Technical layout and connection details for the FANUC A02B-0050-C032 Display: 9-inch monochrome CRT.

Selection and Service Notes

When specifying a replacement, confirm the order code unit against the unit being removed. The display is a 9-inch monochrome CRT, and the assembly includes the MDI keyboard unit. Environmental limits for the wider family include an operating ambient range of 0 to 55 °C and relative humidity of 75%RH or less without condensation; verify these against your panel conditions. Please verify current lifecycle status and availability with Autronexa before ordering, since this is a legacy product. For maintenance engineers, the practical checklist is simple: match the order code, inspect the replacement for physical damage on arrival, and keep the removed unit for reference or repair. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: A02B-0050-C032-datasheet.pdf

Frequently asked questions

Is this A02B-0050-C032 a genuine FANUC unit or a copy?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it is listed. The A02B-0050-C032 is supplied as genuine surplus or refurbished stock, not as a grey-market clone.

What condition will the A02B-0050-C032 arrive in?

Units are supplied refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa to confirm the condition grade of current stock.

How fast can Autronexa ship the A02B-0050-C032?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability before placing your order.

Does the A02B-0050-C032 work with a FANUC System 6T control?

The unit is listed as compatible with the FANUC System 6T CNC and connects to the CNC main unit through internal CRT/MDI signal cables. Verify compatibility against official FANUC documentation for your specific machine before ordering.

Related & compatible parts

FANUC

A02B-0041-C028

Genuine surplus FANUC A02B-0041-C028 pre-amplifier unit for Series 10/11/12 CNC — verified condition, practical sourcing help, ready to…

In Stock

FANUC · FANUC System 3/5/6 CNC

A02B-0047-C062

Genuine FANUC A02B-0047-C062 BTR cable for System 3/5/6 CNC, without reel. Verified surplus and refurbished units from Autronexa.

In Stock

FANUC

A02B-0029-K891

Genuine surplus FANUC A02B-0029-K891 connector kit with 50-pin female rectangular connector and A63L-0001 series contact pins for early…

In Stock

FANUC · FANUC Series 16/18 CNC

A02B-0120-K301

Connector kit (20-pin ribbon cable connector) for FANUC Series 16/18 CNC.

Available on request

News & guides for FANUC

View all articles

Request a quote for this part

Part number: A02B-0050-C032

We reply within one business day.

A02B-0050-C032 Quote reply within 1 business day