Emerson Sensors & Encoders

Emerson A6110

Non-contact sensor measuring shaft position and

Manufacturer: Emerson Part Number: A6110

Genuine surplus Emerson A6110 shaft relative vibration monitor for AMS 6500. Verified condition, practical sourcing support, and clear lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Number of Inputs Two, independent or combined monitoring modes
Input Type Eddy current, differential
Compatible Sensors 6422, 6423, 6424, 6425
Input Voltage Range 0 to -22 VDC
Input Frequency Range Lower cutoff 1 or 5 Hz; upper cutoff 50 - 2000 Hz adjustable
Measuring Range 0 - 400 mV to 0 - 8000 mV, continuously adjustable
Outputs 0/4-20 mA and 0 - 10 VDC per channel
Operating Temperature 0° - 65°C (32° - 149°F)
Power Consumption Max. 6 W, 250 mA at 24 VDC
Dimensions (W x H x L) 30.0 mm x 128.4 mm x 160.0 mm

Description

The Emerson A6110 is a two-channel shaft relative vibration monitor for the AMS 6500 machinery health monitor, built to protect critical rotating machinery by comparing vibration against alarm setpoints. Maintenance teams choose genuine surplus or refurbished units to restore protection quickly without waiting on OEM lead times.

What the A6110 Does in an AMS 6500 Rack

This unit is a 3U, 1-slot plugin module that accepts two independent eddy current displacement sensor inputs, either independent or combined. It works with Emerson sensors 6422, 6423, 6424, and 6425, and the input is galvanically separated from the power supply. The module measures shaft vibration relative to the bearing case, which is the preferred measurement on sleeve-bearing machines with massive casings. Because it is API 670 compliant and hot-swappable, you can replace a faulty card without shutting down the rack. Front-panel LEDs show channel OK, alert, and danger status separately for each channel, so a technician can confirm module health at a glance.

Figure 1: Front view of the Emerson A6110 Non-contact sensor measuring shaft position and showing its physical design and enclosure.

Key Specifications for Maintenance Planning

Each channel provides a 0/4-20 mA current output and a 0-10 VDC voltage output proportional to the main value, plus buffered raw outputs with a frequency range of 0.1-16 kHz (-3 dB). The measuring range is continuously adjustable from 0-400 mV to 0-8000 mV. Alarm setpoints are adjustable from 5-100% of full scale with 0-5 second time delays per channel. The module consumes a maximum of 6 W at 24 VDC and operates from 0° to 65°C. For cabinet planning, the card measures 30.0 mm wide, 128.4 mm high, and 160.0 mm long, with a net weight of approximately 320 g.

Figure 2: Technical layout and connection details for the Emerson A6110 Non-contact sensor measuring shaft position and.

Why Genuine Surplus Makes Sense for This Module

When a vibration monitor fails, the priority is restoring machinery protection without a long OEM lead time. Autronexa supplies genuine surplus and refurbished unit modules that are tested against OEM datasheet specifications and functionally verified by our sourcing team. Each unit is checked for correct sensor input response, alarm relay operation, and output accuracy before it ships. This approach gives maintenance engineers a practical alternative to waiting on new-build lead times, while keeping the original AMS 6500 architecture intact. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: A6110-datasheet.pdf

Frequently asked questions

Is the Emerson A6110 a genuine module or a clone?

Autronexa verifies every A6110 against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished units, not grey-market copies.

What condition will the A6110 arrive in?

Our default condition is refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for current condition details on specific units.

How fast can you ship the A6110?

Lead time depends on current stock. Contact Autronexa for current lead time and availability before ordering.

Does the A6110 work with existing AMS 6500 racks?

Yes, the A6110 is a 3U, 1-slot plugin module designed for the AMS 6500 machinery health monitor. It is API 670 compliant and hot-swappable, so it fits standard AMS 6500 racks.

Related & compatible parts

Emerson

EZ1080-16-11-010

Genuine surplus Emerson EZ1080-16-11-010 8mm eddy current sensor with 160mm case, M10x1 threads and 1m cable — verified…

In Stock

Emerson

A6312

Genuine surplus Emerson A6312 dual-channel speed and key monitor for AMS 6500 systems, verified condition and ready to…

In Stock

Emerson

EZ1080-18-08-010

Genuine surplus Emerson EZ1080-18-08-010 8mm eddy current sensor, verified and ready to ship for turbomachinery displacement measurement.

In Stock

Emerson

EZ1080-060-00-50

Genuine surplus Emerson EZ1080-060-00-50 eddy current sensor with 600mm case, M10x1 threads, and 5m cable. Verified condition, ready…

In Stock

News & guides for Emerson

View all articles

Request a quote for this part

Part number: A6110

We reply within one business day.

A6110 Quote reply within 1 business day