Emerson I/O & Function Modules

Emerson EZ1080-060-00-50

ECS 8mm

Manufacturer: Emerson Part Number: EZ1080-060-00-50

Genuine surplus Emerson EZ1080-060-00-50 eddy current sensor with 600mm case, M10x1 threads, and 5m cable. Verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Linear Measurement Range 2 mm (80 mils)
Initial Air Gap 0.5 mm (20 mils)
Incremental Scale Factor (ISF) API: 7.87 V/mm (199.9 mV/mil) ± 5% or ISO: 8 V/mm (203.2 mV/mil) ± 5% @ 0 to 45°C
Deviation from Best Fit Straight Line ± 0.025 mm (± 1 mil) @ 0 to 45°C
Case Threads M10x1
Case Length 600 mm
Unthreaded Length 0 mm
Cable Length 5.0 m
Armored Cable No
Operating Temperature Range Sensor incl. 1m Cable: -35 to +180°C; Cable & Connector: -35 to +150°C

Description

The EZ1080-060-00-50 is an Emerson 8mm eddy current sensor built for non-contact measurement of radial and axial shaft displacement on steam, gas, and hydro turbines, compressors, gearboxes, pumps, and fans. For maintenance teams facing unplanned downtime, sourcing a genuine surplus or refurbished unit can restore monitoring faster than waiting on OEM lead times. Autronexa verifies each sensor against OEM datasheet markings before it ships.

What the EZ1080-060-00-50 Delivers in Turbomachinery Monitoring

This sensor measures shaft dynamic displacement, position, eccentricity, and speed/key without contacting the target. Its 2 mm linear range and 0.5 mm initial air gap suit standard radial and axial probe installations. The incremental scale factor is 7.87 V/mm (199.9 mV/mil) ± 5% in API configuration or 8 V/mm (203.2 mV/mil) ± 5% in ISO configuration, measured over 0 to 45°C. Deviation from best fit straight line stays within ± 0.025 mm (± 1 mil) across that same temperature band. For a plant, that repeatability means fewer false trips and less time spent recalibrating after a sensor swap. The M10x1 case thread and 600 mm case length match common mounting adapters, while the 5 m cable reaches junction boxes without an extension run.

Figure 1: Front view of the Emerson EZ1080-060-00-50 ECS 8mm showing its physical design and enclosure.

Surplus Advantage: Why a Verified Refurbished Unit Makes Sense Here

A failed eddy current sensor can halt protection system coverage on a critical machine. OEM lead times for new units often stretch while the turbine or compressor runs on reduced monitoring. Autronexa’s surplus and refurbished stock offers a practical alternative. Each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. The unarmored 5 m cable and M10x1 thread are confirmed before dispatch. Because these sensors carry ATEX, IEC-Ex, CSA, and UL hazardous-area approvals, a verified unit preserves the safety rating your installation depends on. That reduces both replacement cost and the risk of installing an unverified clone. Genuine parts, verified, arrive with clear condition notes and current lead times.

Figure 2: Technical layout and connection details for the Emerson EZ1080-060-00-50 ECS 8mm.

Selection and Sourcing Guide for This unit

Buyers should confirm the exact model code before ordering. This unit specifies a 600 mm case, 0 mm unthreaded length, M10x1 threads, no armored cable, and a 5 m cable. If your machine requires a different case length or cable run, a different suffix is needed. Also verify the target material and minimum shaft diameter against your machine drawing. For hazardous areas, check that the converter and sensor temperature classification match your zone. Autronexa can cross-reference your existing probe and confirm compatibility. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: EZ1080-060-00-50-datasheet.pdf

Frequently asked questions

Is this EZ1080-060-00-50 a genuine Emerson sensor or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. The EZ1080-060-00-50 we supply is a genuine Emerson sensor, not a copy.

What condition will the EZ1080-060-00-50 arrive in?

Our default condition is refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available. Contact Autronexa for the current condition grade of this specific unit.

How fast can you ship the EZ1080-060-00-50?

Lead time depends on current stock. Contact Autronexa for the verified lead time on this part number before placing your order.

Does the EZ1080-060-00-50 carry hazardous-area approvals?

Yes. The sensor family carries ATEX, IEC-Ex, CSA, UL, and CCC approvals for intrinsic safety and increased safety. Area classification depends on the converter used, so confirm your converter documentation.

Related & compatible parts

Emerson

A6120

Genuine surplus Emerson A6120 two-channel seismic vibration monitor for CSI 6500 racks — verified condition, practical lead times.

In Stock

Emerson

Emerson 389-01-12-55

Genuine surplus Emerson 389-01-12-55 ORP sensor with triple junction reference and 1-in. MNPT connections. Verified condition, ready to…

In Stock

Emerson

A6500-UM

Genuine surplus Emerson A6500-UM Universal Measurement Card for AMS 6500 ATG, with 2 sensor channels and 5 digital…

In Stock

Emerson

EZ1080-12-00-010

Genuine surplus Emerson EZ1080-12-00-010 8mm eddy current sensor with M10x1 threads and 1m cable, verified for turbomachinery displacement…

In Stock

News & guides for Emerson

View all articles

Request a quote for this part

Part number: EZ1080-060-00-50

We reply within one business day.

EZ1080-060-00-50 Quote reply within 1 business day