Lenze I/O & Function Modules

Lenze EPM-S404

Analog input compound module

Manufacturer: Lenze Part Number: EPM-S404

Genuine surplus Lenze EPM-S404 analog input module with four RTD channels, 16-bit resolution, and verified condition from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Number of inputs 4 (analog, resistance / RTD)
Resistance ranges 0 … 60 Ω, 0 … 600 Ω, 0 … 3000 Ω
Resistance thermometer ranges Pt100, Pt1000, Ni100, Ni1000
Resolution 16 bits
Measuring principle Sigma-delta
Basic conversion time 4.2 … 324.1 ms per channel (at 50 Hz)
Supply voltage DC 24 V nominal (DC 20.4 … 28.8 V)
Dimensions (H×W×D) 109 × 12.5 × 76.5 mm

Description

The Lenze EPM-S404 is a Analog input compound module for industrial control and automation applications.

The Lenze EPM-S404 is a four-channel analog input compound module for the I/O System 1000, accepting resistance and RTD signals with 16-bit resolution. For maintenance teams, a verified surplus or refurbished unit keeps temperature and resistance loops running without OEM lead-time delays.

What Does this module Do in a Control Cabinet?

This module mounts on the I/O System 1000 backplane bus and converts resistance and resistance-thermometer signals into digital values. It supports resistance ranges of 0 … 60 Ω, 0 … 600 Ω, and 0 … 3000 Ω, plus Pt100, Pt1000, Ni100, and Ni1000 sensors. Because one module covers four input channels, you avoid buying four separate single-channel cards. That density lowers both cabinet space and per-point wiring cost. The sigma-delta measuring principle and 16-bit resolution support stable readings for slow process variables such as bearing or winding temperature. Basic conversion time ranges from 4.2 … 324.1 ms per channel at 50 Hz, so you can match scan speed to the loop rather than over-specifying fast hardware. Shielded cable runs up to 200 m maximum let sensors sit far from the cabinet without extra signal conditioners.

Figure 1: Front view of the Lenze EPM-S404 Analog input compound module showing its physical design and enclosure.

How Does Surplus Stock Reduce Cost and Downtime?

When a temperature input card fails, the cost is not just the replacement part. It is the hours of lost production while a new-build unit ships. Autronexa holds genuine surplus and refurbished Lenze modules, and each unit is checked against OEM datasheet markings before dispatch. A refurbished this module is tested against OEM datasheet specifications and functionally verified by our sourcing team. That means you get a known-condition module rather than an untested pull. The module draws 75 mA from the backplane bus and 30 mA typical from load voltage L+, with 1 W power loss. Those modest figures matter when you are adding channels to an existing cabinet without upgrading the power supply. A 9 V maximum input destruction limit also gives a clear protection boundary for wiring checks.

Figure 2: Technical layout and connection details for the Lenze EPM-S404 Analog input compound module.

What Should Buyers Verify Before Ordering an this module?

First, confirm the host system is I/O System 1000 and that your fieldbus is handled by an EPM-S1xx bus coupler, because this module has no built-in ports. Second, check sensor type against the supported RTD list and resistance ranges. Third, confirm the 109 × 12.5 × 76.5 mm single-width housing fits your available DIN-rail slot. Fourth, decide between surplus and refurbished condition based on your spares policy. Because the I/O System 1000 is an active Lenze product line, documentation is available, but availability of specific modules still varies. Autronexa provides practical sourcing help across Allen-Bradley, Bently Nevada, Siemens, and Schneider systems as well. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the Lenze EPM-S404 a genuine part or a clone?

Autronexa verifies each Lenze EPM-S404 against OEM datasheet markings and part-number cross-reference before it enters stock. Units are genuine surplus or refurbished, not grey-market copies.

What condition will the EPM-S404 arrive in?

The Lenze EPM-S404 is supplied as refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus condition may also be available on request.

How fast can Autronexa ship the EPM-S404?

Lead time for the Lenze EPM-S404 depends on current stock. Contact Autronexa for the exact lead time and availability before placing your order.

Does the EPM-S404 need a separate bus coupler?

Yes. The Lenze EPM-S404 is a backplane-bus I/O compound module with no built-in ports, so fieldbus communication is provided by an EPM-S1xx bus coupler in the same I/O System 1000 rack.

Related & compatible parts

Lenze

E82CV302K4C

Genuine surplus Lenze E82CV302K4C 8200 vector inverter with cold-plate cooling, 3.0 kW rating and 7.3 A output —…

In Stock

Lenze

EMB9352-C

Genuine surplus Lenze EMB9352-C braking module for Series 9300 inverters, verified and ready to ship with clear lead…

In Stock

Lenze

E82CV251K2C

Genuine surplus Lenze E82CV251K2C cold-plate inverter: 0.25 kW, 1.7 A, IP20. Verified condition and practical sourcing support from…

In Stock

Lenze

E82CV222K4C

Genuine surplus Lenze E82CV222K4C cold-plate inverter: 2.2 kW, 5.6 A, IP20. Verified condition and practical sourcing support from…

In Stock

News & guides for Lenze

View all articles

Request a quote for this part

Part number: EPM-S404

We reply within one business day.

EPM-S404 Quote reply within 1 business day