Flexem I/O & Function Modules

Flexem F5-MD0808N

Compatibility Compatible

Manufacturer: Flexem Part Number: F5-MD0808N

Genuine surplus and refurbished Flexem F5-MD0808N I/O modules — verified 8-point bipolar 24 VDC input and transistor output, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Input Characteristics 8 Point Bipolar
Input Rated Voltage 24 VDC
Input Range 0~28.8 VDC
Input Rated Current 7 mA
Input Impedance 3.3 kOhm
Output Characteristics 8 Point Transistor
Output Rated Voltage 24 VDC
Output Rated Current 0.5 A
Maximum Output Frequency 1 kHz
Isolation (output to logic) 500 V AC

Description

When a Flexem F5-MD0808N I/O module fails on a running control panel, every hour of downtime adds cost. Sourcing a genuine replacement quickly matters. Autronexa supplies verified surplus and refurbished Flexem F5-MD0808N modules — 8-point bipolar 24 VDC input and 8-point transistor output — with clear condition grading and practical sourcing support for maintenance and procurement teams.

What This unit Does in a Control System

This unit is a compact I/O module that combines eight bipolar input points with eight transistor output points on a 24 VDC platform. Its inputs accept 0~28.8 VDC, with state 1 recognised above 15 V and state 0 below 5 V, so the module interfaces with 2/3-wire sensors in either source or sinking wiring. Optocoupler isolation separates field signals from internal logic. A default 1 ms filter, selectable across 16 levels up to 100 ms, helps reject contact bounce and electrical noise. On the output side, each point is rated 0.5 A at 24 VDC, with short-circuit protection and self-recovery after overload. Maximum output frequency is 1 kHz, and isolation between output and internal logic is rated 500 V AC. Cable runs are limited to 100 m shielded or 50 m unshielded for inputs, and 50 m unshielded for outputs.

Figure 1: Front view of the Flexem F5-MD0808N Compatibility Compatible showing its physical design and enclosure.

Why Genuine Surplus and Refurbished Makes Sense Here

New-production lead times for compact I/O modules can stall a maintenance window. Autronexa keeps genuine surplus and refurbished Flexem units available so you can close the gap without compromising authenticity. Each refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch. You get the same 24 VDC input and transistor output behaviour, the same optocoupler isolation, and the same 1 kHz output capability — without waiting on a factory allocation. For plants standardising on Flexem I/O, this is a practical way to keep spares on the shelf.

Figure 2: Technical layout and connection details for the Flexem F5-MD0808N Compatibility Compatible.

Buyer’s Checklist Before You Order

Start by confirming the exact model and revision on your existing module. Check that your field devices fall within the input range of 0~28.8 VDC and that output loads stay within 0.5 A per point. Verify your cable type and length against the 100 m shielded and 50 m unshielded limits. Decide whether you need surplus or refurbished condition, and ask for the condition grade in writing. Finally, confirm accessory and terminal compatibility with your panel wiring. Autronexa can cross-reference your part number and confirm current availability — contact us with your requirements for verified condition and lead time.

📄 Download Datasheet: F5-MD0808N-datasheet.pdf

Frequently asked questions

Is the Flexem F5-MD0808N a genuine part or a clone?

Autronexa verifies every F5-MD0808N against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished units only.

What condition will the F5-MD0808N arrive in?

Units are supplied refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus condition may also be available — confirm the grade with Autronexa when ordering.

How fast can Autronexa ship the F5-MD0808N?

Lead time depends on current stock and condition grade. Contact Autronexa with your part number for verified availability and a clear dispatch estimate.

Does the F5-MD0808N work with 2-wire and 3-wire sensors?

Yes. The module's input type is source/sinking and it is compatible with 2/3-wire sensors, with an input range of 0~28.8 VDC.

Related & compatible parts

Flexem

FE6100WE

Genuine surplus Flexem FE6100WE 10.1-inch resistive HMI with Ethernet and 24V DC input, verified and ready to ship…

In Stock

Flexem

FR-D0016P

Genuine surplus Flexem FR-D0016P digital output module with 16 PNP channels, 1000mA per channel, and 35mm DIN-rail mounting…

In Stock

Flexem

FL8-E32-D

Genuine surplus Flexem FL8-E32-D CPU module with 32-axis EtherCAT control and 8 digital inputs for motion automation.

In Stock

Flexem

FE7070C

Genuine surplus Flexem FE7070C HMI panel with a 7-inch 800×480 resistive touchscreen, verified condition and practical sourcing support.

In Stock

News & guides for Flexem

View all articles

Request a quote for this part

Part number: F5-MD0808N

We reply within one business day.

F5-MD0808N Quote reply within 1 business day