Flexem Vibration Monitoring FPad Series

Flexem FPad712

Vibration Monitoring

Manufacturer: Flexem Part Number: FPad712

12.1-inch 16:10 web-based HMI panel with 1280×800 resolution, quad-A72/quad-A53 CPU, dual Gigabit Ethernet, and Linux OS.

  • New Surplus
  • Available on request
Call us

Availability & pricing

Condition Price Stock / lead time Action
New Surplus On request Available on request

Ships within 7 business days

Technical specifications

Model FPad712
Brand Flexem
Series FPad Series
CPU 4×Cortex-A72 + 4×Cortex-A53, up to 2.2 GHz
Memory 2 GB DDR4 + 16 GB eMMC
OS Linux
SD card slot Not available
Real-time clock Built-in
Programming software FStudio Unified
Display 12.1" 16:10 TFT LCD
Resolution 1280×800
Colors 24-bit
Brightness 400 cd/m²
Viewing angles (T/B/L/R) 80°/80°/80°/80°
Touch panel 4-wire industrial resistive touchscreen
Backlight LED
LCD lifetime 50,000 hours
Built-in ports 2×Gigabit RJ45 (10/100/1000 Mbps auto-adaptive); 2×USB 3.0 Type-A; COM1 (RS232/RS485/RS422); COM2 (RS485/RS422); COM3 (RS232)
Protocols Not published in official datasheet
Communication expansion None
Supply voltage DC 24V nominal, operating range DC 18–28V
Power consumption <15W maximum
Power protection Lightning surge protection
Power interruption tolerance <5 ms
EMC EN61000-6-2:2019, EN61000-6-4:2019, RoHS; lightning surge ±1 kV, group pulse ±2 kV; electrostatic contact 4 kV, air discharge 8 kV
Operating temperature -10 to 60 °C
Storage temperature -20 to 70 °C
Relative humidity 10 to 90 %RH (non-condensing)
Protection rating Front IP65, rear IP20
Vibration endurance 10–25 Hz (X/Y/Z direction, 2G/30 min)
UV resistance Not for use in high UV environments
Cooling Natural convection
Dimensions (H×W×D) 228×313×38 mm
Panel cutout (W×H) 295×217 mm
Weight ~2.30 kg (about 2300 g, supplier-reported)
Enclosure Non-ferrous alloy
Installation Flush mount / VESA mount

Description

The FPad712 is a catalog part supplied for replacement and new-build use in industrial control installations. Every rating below is taken from the manufacturer documentation for this part number. Headline figures: supply voltage DC 24V nominal, operating range DC 18–28V; weight ~2.30 kg (about 2300 g, supplier-reported); operating temperature -10 to 60 °C

Electrical Ratings

Supply voltage is DC 24V nominal, operating range DC 18–28V. match this against the supply available at the installation site, including any tolerance on the incoming feed. Power consumption is <15W maximum. size the power supply and the rack load around this figure; it is the draw the part places on the supply it is installed in. Power protection is Lightning surge protection. this describes how the part behaves during supply disturbances, which matters where an outage must not cause an unplanned trip. Power interruption tolerance is <5 ms. this describes how the part behaves during supply disturbances, which matters where an outage must not cause an unplanned trip. UV resistance is Not for use in high UV environments. compare this against the requirement it must satisfy in the application before release to site.

Mechanical & Dimensional Data

Dimensions (H×W×D) is 228×313×38 mm. take this measurement into account when setting panel depth, rail position or enclosure clearance, since oversize is the normal reason a correct part will not physically fit. Weight is ~2.30 kg (about 2300 g, supplier-reported). factor this into lifting, rail-loading and shipping decisions; it is also the figure to quote when a handling study is required. Enclosure is Non-ferrous alloy. the material determines corrosion behaviour and thermal performance in the installed environment.

Environmental & Compliance Ratings

Operating temperature is -10 to 60 °C. check the enclosure temperature at the planned mounting location stays inside this band during the hottest operating period. Storage temperature is -20 to 70 °C. observe this figure during transport and warehouse storage, which are not the same condition as operation. Relative humidity is 10 to 90 %RH (non-condensing). maintain the stated humidity range in the cabinet; condensation is the usual cause of failure in equipment installed in humid plant rooms. Vibration endurance is 10–25 Hz (X/Y/Z direction, 2G/30 min). confirm the installed location falls within this environmental capability.

Additional Verified Data

CPU is 4×Cortex-A72 + 4×Cortex-A53, up to 2.2 GHz. Memory is 2 GB DDR4 + 16 GB eMMC. OS is Linux. Real-time clock is Built-in. Programming software is FStudio Unified. Display is 12.1" 16:10 TFT LCD. Resolution is 1280×800. Colors is 24-bit. Brightness is 400 cd/m². Viewing angles (T/B/L/R) is 80°/80°/80°/80°. Touch panel is 4-wire industrial resistive touchscreen. Backlight is LED. LCD lifetime is 50,000 hours. Built-in ports is 2×Gigabit RJ45 (10/100/1000 Mbps auto-adaptive); 2×USB 3.0 Type-A; COM1 (RS232/RS485/RS422); COM2 (RS485/RS422); COM3 (RS232). EMC is EN61000-6-2:2019, EN61000-6-4:2019, RoHS; lightning surge ±1 kV, group pulse ±2 kV; electrostatic contact 4 kV, air discharge 8 kV. Protection rating is Front IP65, rear IP20. Panel cutout (W×H) is 295×217 mm. Installation is Flush mount / VESA mount.

Models in This Series

Autronexa currently lists this product entry as the only model in its entry. Cross-reference requests for equivalent or superseded part numbers are handled on request.

Confirming the Correct Variant Before Ordering

Read the part number marked on the unit being replaced and compare it character by character with the ordering code above, including any option suffix. Check the values in the technical specification table of this page against the nameplate on the existing unit rather than against a previous purchase record. Confirm the supply voltage available at the installation site is DC 24V nominal, operating range DC 18–28V, which is the documented requirement for this model.

Request a Quote

Autronexa supplies the FPad712 as a quote-based item. Send the part number, quantity and destination for current stock, lead time and pricing; no fixed price is published for this part.

Frequently asked questions

What is the FPad712?

Flexem FPad712 is an industrial automation component we supply from surplus and refurbished stock. Confirm the exact configuration, condition and lead time with our team before purchase.

Is the FPad712 in stock, and what is the lead time?

We list the FPad712 as in stock in New Surplus condition. Request a quote for current availability, pricing and confirmed lead time — most items ship within 1–3 business days.

Do you provide a datasheet for the FPad712?

Where available, the product page links the original manufacturer datasheet (PDF). Use the request-a-quote form to receive the full documentation pack and compliance information.

Can the FPad712 be cross-referenced to an equivalent?

Many automation parts have equivalents or legacy replacements. Send us the FPad712 together with your application details and we will confirm compatibility and alternatives.

What input voltage does the FPad712 use?

The FPad712 operates at DC 24V nominal, operating range DC 18–28V. Verify the exact range and any hazardous-area limits against the product label before installation, because input requirements vary by ordered variant.

What is the operating temperature range of the FPad712?

The FPad712 operating temperature is listed as -10 to 60 °C. Stay within the documented band during operation; storage limits may differ. Elevated ambient conditions can reduce the continuous current or power rating of the module.

What are the dimensions and weight of the FPad712?

The FPad712 measures 228×313×38 mm and weighs ~2.30 kg (about 2300 g, supplier-reported). Confirm clearance and rack or panel space before ordering.

What is the FPad712 and what is it used for?

The FPad712 is a industrial component device. It is used in industrial control and automation systems where a verified part number and specification match are required for replacement or new design.

What supply voltage does the FPad712 need?

The manufacturer documentation lists supply voltage DC 24V nominal, operating range DC 18–28V. for this model. Confirm the supply at the installation site matches, including any tolerance on the incoming feed, before the part is ordered.

How much does the FPad712 weigh?

The documented weight is ~2.30 kg (about 2300 g, supplier-reported).. Use it for lifting, rail-loading and shipping decisions, and quote it when a handling study is required for the installation.

Related & compatible parts

Flexem

FE7070C

Genuine surplus Flexem FE7070C HMI panel with a 7-inch 800×480 resistive touchscreen, verified condition and practical sourcing support.

In Stock

Flexem

FL8-E32-D

Genuine surplus Flexem FL8-E32-D CPU module with 32-axis EtherCAT control and 8 digital inputs for motion automation.

In Stock

Flexem

FE6100WE

Genuine surplus Flexem FE6100WE 10.1-inch resistive HMI with Ethernet and 24V DC input, verified and ready to ship…

In Stock

Flexem

F110

Genuine Flexem F110 HMI panel with 10.1" 1280×800 capacitive touch, dual-core CPU, and quad COM ports — verified…

In Stock

News & guides for Flexem

View all articles

Request a quote for this part

Part number: FPad712

We reply within one business day.

FPad712 Quote reply within 1 business day