Keyence Sensors & Encoders

Keyence AP-31K

Digital pressure sensor

Manufacturer: Keyence Part Number: AP-31K

Genuine surplus Keyence AP-31K negative-pressure sensor, verified and ready to ship — a practical alternative to OEM lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated pressure 0 to -29.9 inchHg
Detectable pressure range -15 to +110 % of F.S.
Fluid type Air or non-corrosive gases
Supply voltage 12 to 24 VDC ±10%
Output type NPN open collector, 2-output (N.O./N.C. selectable)
Analog output 1 to 5 V (Load impedance: 47 kΩ minimum)
Response time 2.5 / 5 / 100 / 500 ms selectable
Operating temperature 0 to +50 °C (No freezing)
Weight Approx. 120 g

Description

When a vacuum pick-and-place head starts missing parts, the pressure sensor is usually the first suspect — and the last part anyone wants to wait weeks for. The Keyence AP-31K is a negative-pressure, NPN-output digital sensor from the AP-30 series, and Autronexa supplies it as verified surplus for maintenance teams that need a genuine unit without an OEM lead-time queue.

What This Sensor Does on the Line

The AP-31K reads gauge pressure in the negative range, from 0 to -29.9 inchHg, with a detectable range of -15 to +110 % of full scale. That window covers the vacuum levels found in pick-and-place, chucking and leak-test stations, where a dropped vacuum signal stops the cycle. The 3½-digit, two-colour, 7-segment LED display (11 mm character height) switches colour to flag setpoint status at a glance, so an operator can confirm vacuum at the nozzle without a separate gauge. Resolution is 0.1 inchHg, 0.1 kPa, 1 mmHg or 0.001 bar, and response time is selectable at 2.5, 5, 100 or 500 ms, letting you trade speed for stability where chattering would otherwise trip the output.

Figure 1: Front view of the Keyence AP-31K Digital pressure sensor showing its physical design and enclosure.

Electrical and Output Details

The unit runs on 12 to 24 VDC ±10%, drawing 50 mA maximum at 24 V and 90 mA maximum at 12 V. Two NPN open-collector outputs are selectable as N.O. or N.C., rated 100 mA maximum at 40 V maximum with 1 V maximum residual voltage. A 1 to 5 V analog output is also provided for a load impedance of 47 kΩ minimum, which suits trend logging on a PLC analog card. There are no built-in communication ports and no expansion options, so integration is purely discrete and analog wiring. The pressure port is die-cast zinc, the front housing polyamide, and the cable is oil-proof cabtyre. Operating range is 0 to +50 °C at 35 to 85 % RH, non-condensing, with proof pressure of 72.5 PSI.

Figure 2: Technical layout and connection details for the Keyence AP-31K Digital pressure sensor.

Why Buy This Model as Surplus

Keyence lists the AP-30 series as active, so the case for surplus is availability rather than obsolescence. A failed sensor on a running machine rarely waits for a standard factory order, and refurbished units give you a tested spare at a fraction of new-list cost. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, then functionally checks it before dispatch. Because This unit is a current model, matching the exact suffix and output type matters — confirm your existing unit’s label before ordering. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: AP-31K-datasheet.pdf

Frequently asked questions

Is this a genuine Keyence AP-31K, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished Keyence sensors, not grey-market copies.

What condition will the AP-31K arrive in?

Our default condition is refurbished: the unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact us if you need a surplus-only unit instead.

How fast can you ship this sensor?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability, and we will confirm the ship date before you order.

Does the AP-31K support any fieldbus or communication protocol?

No. The datasheet lists no built-in ports, no protocols and no communication expansion. Integration is through the two NPN open-collector outputs and the 1 to 5 V analog output.

Is the AP-31K still in production at Keyence?

Yes — Keyence production status is confirmed as active (last verified 2026-09). Surplus stock is therefore an availability and cost option rather than an obsolescence workaround.

Related & compatible parts

Keyence

GL-R16L

Genuine surplus Keyence GL-R16L Type 4 safety light curtain set — 16 beams, 600 mm detection height, verified…

In Stock

Keyence

GL-R08L

Genuine surplus Keyence GL-R08L Type 4 light curtain set — 8 beams, 280 mm detection height, verified condition…

In Stock

Keyence

GL-R12L

Genuine surplus Keyence GL-R12L Type 4 safety light curtain set — 12 beam axes, 480 mm length, verified…

In Stock

Keyence · IV Series

IV-H150MA

KEYENCE CORPORATION IV-H150MA Vibration Monitoring. Type: Sensor, Short range; Installed distance: 50 to 150 mm.

Available on request

News & guides for Keyence

View all articles

Request a quote for this part

Part number: AP-31K

We reply within one business day.

AP-31K Quote reply within 1 business day