Keyence Sensors & Encoders

Keyence GL-R12L

Transmitter + Receiver set

Manufacturer: Keyence Part Number: GL-R12L

Genuine surplus Keyence GL-R12L Type 4 safety light curtain set — 12 beam axes, 480 mm length, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Protection type Body protection
Detection capability ø45 mm
Beam axes 12
Beam axis spacing 40 mm
Detection height 440 mm
Total length 480 mm
Detecting distance 0.2 to 15 m
Supply voltage 24 VDC ±20%, Class 2
Protection rating IP65/IP67 (IEC60529)
Operating temperature -10 to +55 °C (No freezing)

Description

How do you restore Type 4 body protection on a machine when the OEM lead time stretches past your maintenance window? The Keyence GL-R12L transmitter and receiver set answers that question with 12 beam axes, a 440 mm detection height, and a 480 mm total length, supplied by Autronexa as genuine surplus with verified condition and practical sourcing support.

What the GL-R12L Delivers on the Line

This unit belongs to Keyence’s GL-R series of Type 4 ESPE/AOPD safety light curtains, configured here for body protection rather than finger or hand detection. Its ø45 mm detection capability and 40 mm beam axis spacing suit guarding openings where operators pass or reach through, while the 0.2 to 15 m detecting distance covers most machine envelopes without repositioning the brackets. An infrared LED at 870 nm carries the beam, and the effective aperture angle stays within ±2.5° at operating distances of 3 m or more. The unit turns ON only when no interruption is present in the detection zone, so the output state reflects a clear zone rather than a latched condition.

Figure 1: Front view of the Keyence GL-R12L Transmitter + Receiver set showing its physical design and enclosure.

Electrical and Safety Ratings in Practice

Power comes from 24 VDC ±20% with 10% or less ripple, Class 2. Two transistor OSSD outputs handle up to 500 mA each; whether they are PNP or NPN depends on the cable type you order, so confirm that detail before wiring. The receiver draws a maximum of 70 mA with the indicator on, and the transmitter 46 mA, both excluding OSSD output current. On the safety side, the set carries IEC61496-1/-2 Type 4 ESPE/AOPD, IEC61508 SIL3, IEC62061 SIL CL3, and EN ISO13849-1 Category 4 PLe, plus UL508 and UL1998. The housing is IP65/IP67 rated and runs from -10 to +55 °C, which covers washdown-adjacent and outdoor-adjacent cells alike.

Figure 2: Technical layout and connection details for the Keyence GL-R12L Transmitter + Receiver set.

Why Genuine Surplus Fits This Safety Device

Safety light curtains are not a category where substitutes pay off. A clone may look identical and still miss the response-time or OSSD behaviour the risk assessment assumes. Autronexa sources genuine surplus and refurbished Keyence units, and each unit set is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. Because the model is active in Keyence production, surplus stock often reaches your dock faster than a factory order, and the cost saving versus OEM list price is real rather than promotional. Confirm the cable type and synchronization method — optical or wire, set by wiring — when you request a quote, and we will match the set to your panel.

Please verify current lifecycle status and availability with Autronexa before ordering.

📄 Download Datasheet: GL-R12L-datasheet.pdf

Frequently asked questions

Is this a genuine Keyence GL-R12L set, or a copy?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The GL-R12L set is genuine Keyence, not a clone.

What condition will the light curtain arrive in?

Our default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask for the condition note on the specific set before purchase.

How fast can you ship the GL-R12L?

Contact Autronexa for current lead time. Surplus stock typically moves faster than a factory order, but availability varies by set.

Does the set work with either PNP or NPN control inputs?

The OSSD outputs are PNP or NPN determined by cable type, so confirm the cable variant you need when ordering.

Is the GL-R12L still in production?

Yes — Keyence production status is confirmed active as of the last verification. Contact Autronexa to confirm current OEM support status.

Related & compatible parts

Keyence

GL-R18L

Genuine surplus Keyence GL-R18L Type 4 light curtain set, 18 beams, 680 mm detection height, verified and ready…

In Stock

Keyence

GL-R14L

Genuine surplus Keyence GL-R14L Type 4 light curtain set — 14 beams, 520 mm detection height, verified and…

In Stock

Keyence

EH-614A

Genuine surplus Keyence EH-614A ultra-thin shielded sensor head for ES series amplifiers — verified condition, practical lead times,…

In Stock

Keyence

AP-32K

Genuine surplus Keyence AP-32K digital pressure sensor — verified NPN two-output unit with 1–5 V analog output, ready…

In Stock

News & guides for Keyence

View all articles

Request a quote for this part

Part number: GL-R12L

We reply within one business day.

GL-R12L Quote reply within 1 business day