Keyence Sensors & Encoders

Keyence AP-33K

Digital pressure sensor

Manufacturer: Keyence Part Number: AP-33K

Genuine surplus Keyence AP-33K digital pressure sensor — 0–145 PSI, NPN, verified condition and faster lead time than OEM.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated pressure 0 to 145.0 PSI
Detectable pressure range -15 to +110 % of F.S.
Fluid type Air or non-corrosive gases
Output type NPN open collector, 2-output (N.O./N.C. selectable)
Supply voltage 12 to 24 VDC ±10%
Analog output 1 to 5 V (Load impedance: 47 kΩ minimum)
Response time 2.5 / 5 / 100 / 500 ms selectable
Operating temperature 0 to +50 °C (No freezing)
Weight Approx. 120 g

Description

How do you keep a pressure-critical line running when a sensor fails and the OEM lead time stretches into weeks? The Keyence AP-33K digital pressure sensor answers that question for maintenance and procurement teams: a positive-pressure, NPN-output unit from the AP-30 series with a 0 to 145.0 PSI rated range, available through Autronexa as verified genuine surplus rather than a long-lead OEM order.

What the AP-30 Series Brings to a Pressure Loop

The AP-30 family is built around fast, readable pressure feedback, and this variant shows it in the display and response settings. The 3½-digit, 2-color, 7-segment LED has an 11 mm character height, so operators can read gauge pressure at a glance from the panel. Resolution reaches 0.2 PSI, 0.001 MPa, 0.01 kgf/cm², and 0.01 bar, which suits leak checks and fine setpoint work on air or non-corrosive gases. Response time is selectable at 2.5 / 5 / 100 / 500 ms, letting you trade speed for chattering prevention where pulsation is present. The display temperature characteristic stays within ±1 % maximum (of F.S.) at 25 °C across the 0 to 50 °C range. Gauge pressure is the measurement type, and the detectable range spans -15 to +110 % of F.S.

Figure 1: Front view of the Keyence AP-33K Digital pressure sensor showing its physical design and enclosure.

Electrical Fit and Output Behavior

The unit runs on 12 to 24 VDC ±10%, drawing 50 mA maximum at 24 V and 90 mA maximum at 12 V. Two NPN open-collector outputs are selectable as N.O. or N.C., rated 100 mA maximum (40 V maximum) with 1 V maximum residual voltage. An analog output of 1 to 5 V is available with a load impedance of 47 kΩ minimum. There are no built-in ports and no communication expansion, so plan this sensor as a discrete and analog device rather than a networked node. The oil-proof cabtyre cable and die-cast zinc pressure port suit typical machine-mounted service, and the polyamide front housing with PET panel sheet and polysulfone rear housing keep the unit at approximately 120 g.

Figure 2: Technical layout and connection details for the Keyence AP-33K Digital pressure sensor.

Why Genuine Surplus Fits This Sensor

Keyence lists the AP-33K as active, with production status confirmed on the official product page as of 2026-09. That matters because an active model is exactly where buyers face OEM list pricing and queue time. Autronexa stocks genuine surplus and refurbished units, each tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch. You get the same 0 to 145.0 PSI sensing range and NPN output behavior without paying new-from-OEM pricing or waiting on a factory allocation. For a maintenance team holding a line together, that is the practical difference between a same-week repair and a stalled asset. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: AP-33K-datasheet.pdf

Frequently asked questions

Is this a genuine Keyence AP-33K, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished Keyence components, not copies.

What condition will the AP-33K arrive in?

Units ship in our default refurbished condition, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade confirmed before ordering.

How fast can you ship the AP-33K?

Lead time depends on current stock. Contact Autronexa for the present availability and dispatch date for this sensor.

Does the AP-33K connect to a PLC or network?

The unit has no built-in communication ports or protocols. It provides two NPN open-collector outputs and a 1 to 5 V analog output, so it wires to discrete and analog inputs rather than a fieldbus.

Is the AP-33K still in production?

Yes. Keyence production status is confirmed on the official product page as of 2026-09. Please verify current lifecycle status and availability with Autronexa before ordering.

Related & compatible parts

Keyence

EH-440

Genuine surplus Keyence EH-440 sensor head — 18 mm stable range, 0.037 mm repeatability, IP67. Verified condition from…

In Stock

Keyence

GL-R06L

Genuine surplus Keyence GL-R06L Type 4 safety light curtain set, verified and ready to ship.

In Stock

Keyence

AP-34K

Genuine surplus Keyence AP-34K compound pressure sensor — verified condition, tested against OEM specs, ready to ship.

In Stock

Keyence

AP-31K

Genuine surplus Keyence AP-31K negative-pressure sensor, verified and ready to ship — a practical alternative to OEM lead…

In Stock

News & guides for Keyence

View all articles

Request a quote for this part

Part number: AP-33K

We reply within one business day.

AP-33K Quote reply within 1 business day