Keyence Sensors & Encoders

Keyence AP-34K

Digital pressure sensor

Manufacturer: Keyence Part Number: AP-34K

Genuine surplus Keyence AP-34K compound pressure sensor — verified condition, tested against OEM specs, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Type Compound pressure, NPN
Rated pressure 29.9 to -29.9 inchHg
Detectable pressure range -15 to +110 % of F.S.
Fluid type Air or non-corrosive gases
Supply voltage 12 to 24 VDC ±10%
Current consumption 50 mA maximum (at 24 V), 90 mA maximum (at 12 V)
Output type NPN open collector, 2-output (N.O./N.C. selectable)
Analog output 1 to 5 V (Load impedance: 47 kΩ minimum)
Response time 2.5 / 5 / 100 / 500 ms selectable
Operating temperature 0 to +50 °C (No freezing)

Description

When a pressure switch on a leak-test or vacuum-handling station starts drifting, the fastest fix is a verified replacement rather than a weeks-long OEM order. The Keyence AP-34K is a compound-pressure, NPN-output digital sensor from the AP-30 series, and Autronexa supplies it as genuine surplus or refurbished stock with condition checked before dispatch.

What the AP-30 Series Sensor Does on the Line

The AP-30 family covers gauge-pressure monitoring where operators need a readable number at the machine, not a remote signal. This unit reads 29.9 to -29.9 inchHg across a detectable range of -15 to +110 % of F.S., so it covers both positive pressure and vacuum in one device. A 3½-digit, two-color, 7-segment LED with 11 mm character height shows the value at a glance, and the display resolution of 0.1 inchHg, 0.2 kPa, 2 mmHg and 0.002 bar lets you match the readout to the unit your process sheet already uses. The two-color switching makes pass/fail states visible without reading the digits.

Figure 1: Front view of the Keyence AP-34K Digital pressure sensor showing its physical design and enclosure.

Electrical and Output Behaviour

The sensor runs on 12 to 24 VDC ±10%, drawing 50 mA maximum at 24 V and 90 mA maximum at 12 V. Two NPN open-collector outputs are selectable as N.O. or N.C., each rated 100 mA maximum at 40 V maximum with 1 V maximum residual voltage. An analog output of 1 to 5 V is available for a load impedance of 47 kΩ minimum, which suits chart recorders and simple monitoring inputs. Response time is selectable at 2.5, 5, 100 or 500 ms, so chattering prevention can be tuned to a noisy vacuum line without changing hardware. There are no built-in ports, protocols or communication expansion — this is a stand-alone sensor, and any network connection would need to be handled at the controller level.

Figure 2: Technical layout and connection details for the Keyence AP-34K Digital pressure sensor.

Sourcing a Genuine Unit Without the OEM Wait

Because the AP-34K remains in active production, buyers sometimes assume the only safe route is a new order. Surplus and refurbished stock gives a practical alternative: units are tested against OEM datasheet specifications and functionally verified by our sourcing team, so the pressure range, output behaviour and display are confirmed before shipping. For maintenance teams holding a machine that is down, that means a genuine part with a clear lead time instead of an open-ended factory date. Autronexa also supports sourcing across Allen-Bradley, Bently Nevada, Siemens and Schneider lines, so a mixed bill of materials can be handled in one request. Before ordering, confirm the exact model and revision on the existing unit, decide whether surplus or refurbished condition fits the application, and check that the oil-proof cabtyre cable and pressure port thread match your installation. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: AP-34K-datasheet.pdf

Frequently asked questions

Is this a genuine Keyence AP-34K, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished components, not grey-market copies.

What condition will the AP-34K arrive in?

The site default condition is Refurbished: units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available — confirm the condition you need when you request a quote.

How fast can you ship the AP-34K?

Lead time depends on current stock at the time of your request. Contact Autronexa for the current lead time and availability for this model.

Does the AP-34K connect to a PLC or network?

No. The unit has no built-in ports, protocols or communication expansion. It provides two NPN open-collector outputs and a 1 to 5 V analog output that can be wired to a controller's discrete or analog inputs.

Is the AP-34K still supported by Keyence?

Yes — official Keyence production status is confirmed as active (last verified 2026-09). Contact Autronexa if you need documentation or a current availability check.

Related & compatible parts

Keyence

AP-32KP

Genuine Keyence AP-32KP digital pressure sensor, surplus/refurbished, verified condition and clear lead times from Autronexa.

In Stock

Keyence · PZ-G series

PZ-G41N

Built-in amplifier photoelectric sensor, diffuse reflective, long-range.

Available on request

Keyence · LR-Z series

LR-ZB100CN

Self-contained CMOS laser photoelectric sensor, rectangular, NPN output, m8 connector, 4-pin.

Available on request

Keyence

GL-R14L

Genuine surplus Keyence GL-R14L Type 4 light curtain set — 14 beams, 520 mm detection height, verified and…

In Stock

News & guides for Keyence

View all articles

Request a quote for this part

Part number: AP-34K

We reply within one business day.

AP-34K Quote reply within 1 business day