Keyence Sensors & Encoders LR-Z series

Keyence LR-ZB100CN

Sensors & Encoders

Manufacturer: Keyence Part Number: LR-ZB100CN

Self-contained CMOS laser photoelectric sensor, rectangular, NPN output, m8 connector, 4-pin.

  • New Surplus
  • Available on request
Call us

Availability & pricing

Condition Price Stock / lead time Action
New Surplus On request Available on request

Ships within 7 business days

Technical specifications

Model LR-ZB100CN
Brand Keyence
Series LR-Z series
Sensor type Self-contained CMOS laser photoelectric sensor (U.C.D. distance/contrast detection)
Shape Rectangular
Cable connection M8 connector, 4-pin
Detecting distance 35 to 100 mm
Standard detectable deviation 35 to 50 mm: 1.5 mm; 50 to 100 mm: 3 mm
Display resolution 2 (0.2 mm)
Spot diameter Approx. 2 x 1 mm at 100 mm
Light source Red laser, wavelength 660 nm
Laser class Class 1 (IEC60825-1; FDA CDRH Part1040.10)
Response time 1.5 ms / 10 ms / 50 ms selectable
Timer OFF / ON-delay / OFF-delay / one-shot
Built-in ports None
Protocols IO-Link v1.1 / COM2 (38.4 kbps) on CB/C3P connector-type models
Communication expansion None
Supply voltage 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
Power consumption 450 mW or less (18 mA or less at 24 V; 34 mA or less at 12 V)
Output type NPN open collector, applied voltage 30 VDC or less, control current 100 mA or less, residual voltage 1.2 V or less at 10 mA or less
Output operation Light-ON / Dark-ON selectable
Operating temperature -10 to +50 °C (No freezing)
Storage temperature -25 to +75 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Protection rating IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X / 6P / 13
Dimensions (H×W×D) Not available
Weight Approx. 55 g (connector type)

Description

The LR-ZB100CN is a catalog part supplied for replacement and new-build use in industrial control installations. Every rating below is taken from the manufacturer documentation for this part number. Headline figures: supply voltage 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS; weight Approx. 55 g (connector type); operating temperature -10 to +50 °C (No freezing)

Electrical Ratings

Supply voltage is 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS. match this against the supply available at the installation site, including any tolerance on the incoming feed. Power consumption is 450 mW or less (18 mA or less at 24 V; 34 mA or less at 12 V). size the power supply and the rack load around this figure; it is the draw the part places on the supply it is installed in. Output type is NPN open collector, applied voltage 30 VDC or less, control current 100 mA or less, residual voltage 1.2 V or less at 10 mA or less. this defines what the part reads or drives; confirm it matches the transducer or signal source wired to it. Output operation is Light-ON / Dark-ON selectable. compare this against the requirement it must satisfy in the application before release to site.

Mechanical & Dimensional Data

Weight is Approx. 55 g (connector type). factor this into lifting, rail-loading and shipping decisions; it is also the figure to quote when a handling study is required.

Environmental & Compliance Ratings

Standard detectable deviation is 35 to 50 mm: 1.5 mm; 50 to 100 mm: 3 mm. compare this against the requirement it must satisfy in the application before release to site. Operating temperature is -10 to +50 °C (No freezing). check the enclosure temperature at the planned mounting location stays inside this band during the hottest operating period. Storage temperature is -25 to +75 °C (No freezing). observe this figure during transport and warehouse storage, which are not the same condition as operation. Relative humidity is 35 to 85 % RH (No condensation). maintain the stated humidity range in the cabinet; condensation is the usual cause of failure in equipment installed in humid plant rooms.

Signal & Communication

Protocols is IO-Link v1.1 / COM2 (38.4 kbps) on CB/C3P connector-type models. match this to the controller or host configuration on site, including addressing and termination.

Ordering & Configuration

Cable connection is M8 connector, 4-pin. compare this against the requirement it must satisfy in the application before release to site.

Additional Verified Data

Shape is Rectangular. Detecting distance is 35 to 100 mm. Display resolution is 2 (0.2 mm). Spot diameter is Approx. 2 x 1 mm at 100 mm. Light source is Red laser, wavelength 660 nm. Laser class is Class 1 (IEC60825-1; FDA CDRH Part1040.10). Response time is 1.5 ms / 10 ms / 50 ms selectable. Timer is OFF / ON-delay / OFF-delay / one-shot. Protection rating is IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X / 6P / 13.

Models in This Series

Autronexa currently lists this product entry as the only model in its entry. Cross-reference requests for equivalent or superseded part numbers are handled on request.

Confirming the Correct Variant Before Ordering

Read the part number marked on the unit being replaced and compare it character by character with the ordering code above, including any option suffix. Check the values in the technical specification table of this page against the nameplate on the existing unit rather than against a previous purchase record. Confirm the supply voltage available at the installation site is 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS, which is the documented requirement for this model.

Request a Quote

Autronexa supplies the LR-ZB100CN as a quote-based item. Send the part number, quantity and destination for current stock, lead time and pricing; no fixed price is published for this part.

Frequently asked questions

What is the LR-ZB100CN?

Keyence LR-ZB100CN is an industrial automation component we supply from surplus and refurbished stock. Confirm the exact configuration, condition and lead time with our team before purchase.

Is the LR-ZB100CN in stock, and what is the lead time?

We list the LR-ZB100CN as in stock in New Surplus condition. Request a quote for current availability, pricing and confirmed lead time — most items ship within 1–3 business days.

Do you provide a datasheet for the LR-ZB100CN?

Where available, the product page links the original manufacturer datasheet (PDF). Use the request-a-quote form to receive the full documentation pack and compliance information.

Can the LR-ZB100CN be cross-referenced to an equivalent?

Many automation parts have equivalents or legacy replacements. Send us the LR-ZB100CN together with your application details and we will confirm compatibility and alternatives.

What input voltage does the LR-ZB100CN use?

The LR-ZB100CN operates at 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS. Verify the exact range and any hazardous-area limits against the product label before installation, because input requirements vary by ordered variant.

What is the operating temperature range of the LR-ZB100CN?

The LR-ZB100CN operating temperature is listed as -10 to +50 °C (No freezing). Stay within the documented band during operation; storage limits may differ. Elevated ambient conditions can reduce the continuous current or power rating of the module.

What are the dimensions and weight of the LR-ZB100CN?

The LR-ZB100CN measures Not available and weighs Approx. 55 g (connector type). Confirm clearance and rack or panel space before ordering.

What is the LR-ZB100CN and what is it used for?

The LR-ZB100CN is a industrial component device. It is used in industrial control and automation systems where a verified part number and specification match are required for replacement or new design.

What supply voltage does the LR-ZB100CN need?

The manufacturer documentation lists supply voltage 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS. for this model. Confirm the supply at the installation site matches, including any tolerance on the incoming feed, before the part is ordered.

How much does the LR-ZB100CN weigh?

The documented weight is Approx. 55 g (connector type).. Use it for lifting, rail-loading and shipping decisions, and quote it when a handling study is required for the installation.

Related & compatible parts

Keyence · PZ-G series

PZ-G41N

Built-in amplifier photoelectric sensor, diffuse reflective, long-range.

Available on request

Keyence

EH-114

Genuine surplus Keyence EH-114 ES series M14 shielded sensor head, verified condition with practical lead times from Autronexa.

In Stock

Keyence

EH-614A

Genuine surplus Keyence EH-614A ultra-thin shielded sensor head for ES series amplifiers — verified condition, practical lead times,…

In Stock

Keyence

AP-34K

Genuine surplus Keyence AP-34K compound pressure sensor — verified condition, tested against OEM specs, ready to ship.

In Stock

News & guides for Keyence

View all articles

Request a quote for this part

Part number: LR-ZB100CN

We reply within one business day.

LR-ZB100CN Quote reply within 1 business day