Keyence Sensors & Encoders

Keyence AP-32K

Digital pressure sensor

Manufacturer: Keyence Part Number: AP-32K

Genuine surplus Keyence AP-32K digital pressure sensor — verified NPN two-output unit with 1–5 V analog output, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated pressure 0 to 14.50 PSI
Detectable pressure range -15 to +110 % of F.S.
Output type NPN open collector, 2-output (N.O./N.C. selectable)
Analog output 1 to 5 V (Load impedance: 47 kΩ minimum)
Supply voltage 12 to 24 VDC ±10%
Current consumption 50 mA maximum (at 24 V), 90 mA maximum (at 12 V)
Display 3½-digit, 2-color, 7-segment LED (Character height: 11 mm)
Response time 2.5 / 5 / 100 / 500 ms selectable
Operating temperature 0 to +50 °C (No freezing)
Weight Approx. 120 g

Description

When a pressure switch drifts or fails on a running pneumatic line, every hour of downtime adds cost. The Keyence AP-32K digital pressure sensor gives maintenance teams a genuine, verified replacement: a positive-pressure, NPN two-output gauge sensor from the AP-30 series, built for air and non-corrosive gases. Autronexa supplies this unit as tested surplus or refurbished stock, so you get authentic Keyence hardware without the OEM wait.

What This Sensor Solves on the Line

The AP-32K addresses the common problem of unreliable pressure confirmation in pneumatic clamping, vacuum handling, and leak-check stations. Its 3½-digit, 2-color, 7-segment LED display (11 mm character height) shows pressure at a glance, switching color to flag setpoint deviations. The rated range is 0 to 14.50 PSI, with a detectable range of -15 to +110 % of F.S. and a display resolution down to 0.02 PSI. Two NPN open-collector outputs (N.O./N.C. selectable) handle 100 mA maximum at 40 V maximum, with residual voltage of 1 V maximum. A 1 to 5 V analog output (47 kΩ minimum load) feeds trend logging or a PLC analog card. Response time is selectable at 2.5 / 5 / 100 / 500 ms, so you can damp chattering on pulsating lines. Supply voltage is 12 to 24 VDC ±10%, drawing 50 mA maximum at 24 V and 90 mA maximum at 12 V.

Figure 1: Front view of the Keyence AP-32K Digital pressure sensor showing its physical design and enclosure.

Why Genuine Surplus Fits This Pressure Sensor

OEM lead times for active sensors can stretch when demand spikes, and a full list-price purchase is hard to justify for a single replacement. Autronexa keeps verified surplus and refurbished AP-30 series units on hand. Each unit is checked against OEM datasheet specifications and functionally verified by our sourcing team before it ships. The oil-proof cabtyre cable and die-cast zinc pressure port are inspected for damage, and the polyamide front housing and PET panel sheet are confirmed intact. Because the model is in active production, you also get a practical alternative to waiting on a factory order — genuine parts, verified, with clear lead times quoted before you commit.

Figure 2: Technical layout and connection details for the Keyence AP-32K Digital pressure sensor.

Sourcing Checklist Before You Order

Confirm three things before purchasing. First, match the exact model and output type: this is This unit, positive pressure with NPN outputs, not a PNP variant. Second, verify your fluid is air or a non-corrosive gas and that system pressure stays within the 72.5 PSI proof limit. Third, decide between surplus and refurbished condition based on your maintenance window — both are tested, but cosmetic grading differs. The sensor operates from 0 to +50 °C with 35 to 85 % RH (no condensation) and resists vibration at 10 to 55 Hz with 1.5 mm double amplitude for 2 hours in each axis. Weighing approximately 120 g, it mounts in tight panels without strain. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: AP-32K-datasheet.pdf

Frequently asked questions

Is this a genuine Keyence AP-32K, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. The AP-32K we ship is genuine Keyence hardware, sourced as surplus or professionally refurbished — never a grey-market copy.

What condition will the AP-32K arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available; contact us for current condition grading and photos.

How fast can you ship the AP-32K?

Lead time depends on current stock. Contact Autronexa for a live availability check and quoted lead time before ordering.

Does the AP-32K work with my existing controller?

The sensor provides two NPN open-collector outputs and a 1 to 5 V analog output. It has no built-in communication ports or protocols, so it connects via discrete wiring or an analog input card — confirm your controller's input type before ordering.

Is the AP-32K still supported by Keyence?

Yes — Keyence lists the AP-30 series as active production (last verified September 2026). Contact Autronexa if you need help confirming OEM support status for your specific revision.

Related & compatible parts

Keyence

AP-31KP

Genuine surplus Keyence AP-31KP negative-pressure PNP sensor — verified condition, clear lead times, and sourcing help from Autronexa.

In Stock

Keyence

EH-114

Genuine surplus Keyence EH-114 ES series M14 shielded sensor head, verified condition with practical lead times from Autronexa.

In Stock

Keyence · IV Series

IV-H150MA

KEYENCE CORPORATION IV-H150MA Vibration Monitoring. Type: Sensor, Short range; Installed distance: 50 to 150 mm.

Available on request

Keyence · GL-V series

GL-VM30LN

Small & robust metal Type 4 safety light curtain, body protection type, 30 beam axes, NPN output, 1200…

Available on request

News & guides for Keyence

View all articles

Request a quote for this part

Part number: AP-32K

We reply within one business day.

AP-32K Quote reply within 1 business day