Keyence Sensors & Encoders

Keyence AP-31KP

Digital pressure sensor

Manufacturer: Keyence Part Number: AP-31KP

Genuine surplus Keyence AP-31KP negative-pressure PNP sensor — verified condition, clear lead times, and sourcing help from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Type Negative pressure, PNP
Rated pressure 0 to -29.9 inchHg
Detectable pressure range -15 to +110 % of F.S.
Fluid type Air or non-corrosive gases
Supply voltage 12 to 24 VDC ±10%
Current consumption 50 mA maximum (at 24 V), 90 mA maximum (at 12 V)
Output type PNP open collector, 2-output (N.O./N.C. selectable)
Analog output 1 to 5 V (Load impedance: 47 kΩ minimum)
Response time 2.5 / 5 / 100 / 500 ms selectable
Operating temperature 0 to +50 °C (No freezing)

Description

When a vacuum line drifts and the display gives you nothing but a blinking fault, every hour of downtime adds up. The Keyence AP-31KP is a negative-pressure, PNP digital pressure sensor from the AP-30 series, and Autronexa supplies it as a verified genuine surplus or refurbished unit for maintenance teams that need the right part without waiting on a factory order.

What the AP-30 Series Brings to a Vacuum Line

Pressure sensing has moved a long way from the days of mechanical gauges that needed a flashlight and a squint. The AP-30 family put a 3½-digit, two-color, 7-segment LED display right on the sensor body, so a technician reads the setpoint and the live value at a glance — character height is 11 mm. This variant is configured for negative pressure with a PNP open-collector output, two outputs with N.O./N.C. selectable, rated from 0 to -29.9 inchHg. It handles air or non-corrosive gases as gauge pressure, and the detectable range stretches from -15 to +110 % of full scale. Display resolution is 0.1 inchHg, 0.1 kPa, 1 mmHg, or 0.001 bar depending on the unit you select.

Figure 1: Front view of the Keyence AP-31KP Digital pressure sensor showing its physical design and enclosure.

Electrical and Environmental Facts Buyers Should Check

The unit runs on 12 to 24 VDC ±10%, drawing 50 mA maximum at 24 V and 90 mA maximum at 12 V. Control output rating is 100 mA maximum at 30 V maximum, with residual voltage of 1 V maximum. An analog output of 1 to 5 V is available with a load impedance of 47 kΩ minimum. Response time is selectable at 2.5, 5, 100, or 500 ms, which helps where chattering would otherwise trip a control sequence. Operating temperature is 0 to +50 °C with no freezing, and relative humidity is 35 to 85 % RH with no condensation. The body uses a polyamide front housing, a PET front panel sheet, a polysulfone rear housing, and a die-cast zinc pressure port. An oil-proof cabtyre cable is fitted. Weight is approximately 120 g. There are no built-in communication ports and no expansion slot, so plan integration around the analog and switching outputs.

Figure 2: Technical layout and connection details for the Keyence AP-31KP Digital pressure sensor.

Why Surplus and Refurbished Makes Sense Here

The AP-31KP is listed as active in official Keyence production status, verified in September 2026, so a new unit can be ordered — but lead time is the variable nobody controls during a shutdown. Autronexa keeps genuine surplus and refurbished stock of AP-30 series sensors, and each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. That means you compare a verified refurbished unit against a factory order rather than against a grey-market box with no history. For plants running vacuum pick-and-place, leak testing, or negative-pressure clamping, this is a practical way to keep a spare on the shelf. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: AP-31KP-datasheet.pdf

Frequently asked questions

Is this a genuine Keyence AP-31KP, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The AP-31KP we supply is a genuine Keyence unit, not a copy.

What condition will the AP-31KP arrive in?

Our default condition is refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available depending on stock — confirm the exact condition with Autronexa when you request a quote.

How fast can you ship the AP-31KP?

Lead time depends on current stock. Contact Autronexa for the current lead time on this negative-pressure PNP sensor before you place an order.

Does the AP-31KP work with my existing controller?

The unit provides a PNP open-collector two-output switching signal and a 1 to 5 V analog output with a load impedance of 47 kΩ minimum. It has no built-in communication ports, so confirm your controller accepts those signal types before ordering.

Is the AP-31KP still supported by Keyence?

Official Keyence production status lists this model as active, last verified in September 2026. Contact Autronexa to confirm OEM support status at the time of your order.

Related & compatible parts

Keyence · IV Series

IV-H150MA

KEYENCE CORPORATION IV-H150MA Vibration Monitoring. Type: Sensor, Short range; Installed distance: 50 to 150 mm.

Available on request

Keyence

AP-33KP

Genuine Keyence AP-33KP digital pressure sensor, surplus/refurbished, verified condition. Positive pressure, PNP, 0–145 PSI.

In Stock

Keyence

AP-32KP

Genuine Keyence AP-32KP digital pressure sensor, surplus/refurbished, verified condition and clear lead times from Autronexa.

In Stock

Keyence

GL-R16L

Genuine surplus Keyence GL-R16L Type 4 safety light curtain set — 16 beams, 600 mm detection height, verified…

In Stock

News & guides for Keyence

View all articles

Request a quote for this part

Part number: AP-31KP

We reply within one business day.

AP-31KP Quote reply within 1 business day