Keyence Sensors & Encoders

Keyence EH-305S

Sensor head

Manufacturer: Keyence Part Number: EH-305S

Genuine surplus Keyence EH-305S sensor head — shielded ø5.4 cylindrical, 3 mm max detecting distance, IP67. Verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Type Shielded, cylindrical (ø5.4), with stainless steel spiral tube
Detectable object Ferrous metals
Standard target (iron, t=1 mm) 5 × 5 mm
Stable detecting range 0 to 1 mm
Maximum detecting distance 3 mm
Hysteresis 0.05 mm
Repeatability 0.002 mm
Operating temperature -10 to +60 °C (No freezing)
Protection rating IP67
Weight Approx. 76 g (including 3-m cable)

Description

When a shielded proximity sensor head fails on a running line, the amplifier may be fine but the sensing front end is not — and the machine stays down until a matching head arrives. The Keyence EH-305S is a passive, separate-amplifier sensor head from the ES series, built for ferrous-metal detection in tight, washdown-prone positions. Autronexa supplies genuine surplus and refurbished units so maintenance teams can restore sensing without waiting on OEM allocation.

What This Sensor Head Does in an ES Series Chain

The EH-305S is a shielded cylindrical head with a ø5.4 body and a stainless steel spiral tube, and it connects to an ES-32DC separate amplifier through a dedicated cable. It carries no supply voltage or communication protocol of its own; the ES series amplifier powers it and processes the signal. That division of labour matters during troubleshooting: if the amplifier shows a fault, the head is not necessarily the cause, and if the head is damaged, the amplifier is usually still serviceable. The shielded construction lets the head sit close to surrounding metal without the sensing field being pulled off target, which is why this format appears on compact fixtures and cramped mounting brackets.

Figure 1: Front view of the Keyence EH-305S Sensor head showing its physical design and enclosure.

Detecting Performance You Can Plan Around

Keyence rates this head for a stable detecting range of 0 to 1 mm and a maximum detecting distance of 3 mm, with a standard target of 5 × 5 mm iron at 1 mm thickness. Hysteresis is 0.05 mm and repeatability is 0.002 mm, so switching position stays consistent from cycle to cycle — useful where a small positional change would otherwise trigger nuisance stops. The head detects ferrous metals; for nonferrous targets, check the characteristics data before specifying it. Temperature characteristics are ±10% max. of detecting distance at 23 °C across the -10 to +60 °C operating range, so range shifts with ambient heat are bounded and predictable. The IP67 protection rating suits areas exposed to coolant splash or washdown, and relative humidity of 35 to 85% RH without condensation covers most plant environments. Weight is approximately 76 g including the 3-m cable.

Figure 2: Technical layout and connection details for the Keyence EH-305S Sensor head.

Why Genuine Surplus Fits This Part

The ES series remains a current Keyence product line, and official pages were active as of 2026-09, so this is not an obsolete-part rescue. The surplus case is different: sensor heads are consumables in practice — cables get pulled, tubes get crushed, and heads get replaced while the amplifier stays in service. Autronexa stocks genuine surplus and refurbished heads so a replacement can be sourced without a full new-amplifier purchase or a long factory lead time. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Before ordering, confirm the exact model and cable length your fixture needs, and ask us to verify current lifecycle status and availability. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: EH-305S-datasheet.pdf

Frequently asked questions

Is this a genuine Keyence EH-305S sensor head, or a clone?

Autronexa verifies units against OEM datasheet markings and part-number cross-reference. This is a genuine Keyence sensor head, supplied as surplus or professionally refurbished — not a grey-market copy.

What condition will the EH-305S arrive in?

Our site default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available when stock allows; confirm the condition you need when requesting a quote.

How fast can you ship the EH-305S?

Lead time depends on current stock. Contact Autronexa for current lead time and availability before committing to a maintenance window.

Does this head work with my existing ES-32DC amplifier?

The EH-305S is a passive sensor head designed for the ES series and connects to the ES-32DC separate amplifier via a dedicated cable. It has no built-in ports or protocols of its own; the amplifier handles power and signal processing.

Is the EH-305S still supported by Keyence?

The ES series is a current product line and official pages were active as of 2026-09, not marked discontinued. Please verify current lifecycle status and availability with Autronexa before ordering.

Related & compatible parts

Keyence

GL-R18L

Genuine surplus Keyence GL-R18L Type 4 light curtain set, 18 beams, 680 mm detection height, verified and ready…

In Stock

Keyence

AP-32K

Genuine surplus Keyence AP-32K digital pressure sensor — verified NPN two-output unit with 1–5 V analog output, ready…

In Stock

Keyence · PZ-G series

PZ-G41N

Built-in amplifier photoelectric sensor, diffuse reflective, long-range.

Available on request

Keyence · LR-Z series

LR-ZB100CN

Self-contained CMOS laser photoelectric sensor, rectangular, NPN output, m8 connector, 4-pin.

Available on request

News & guides for Keyence

View all articles

Request a quote for this part

Part number: EH-305S

We reply within one business day.

EH-305S Quote reply within 1 business day