Keyence Sensors & Encoders

Keyence GL-R18L

Transmitter + Receiver set

Manufacturer: Keyence Part Number: GL-R18L

Genuine surplus Keyence GL-R18L Type 4 light curtain set, 18 beams, 680 mm detection height, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Protection type Body protection, Type 4 ESPE/AOPD
Beam axes 18
Beam axis spacing 40 mm
Detection capability ø45 mm
Detection height 680 mm
Total length 720 mm
Detecting distance 0.2 to 15 m
Supply voltage 24 VDC ±20%, Class 2
Response time (OSSD) max. 6.6 ms (ON→OFF)
Protection rating IP65/IP67

Description

The Keyence GL-R18L is a Type 4 safety light curtain transmitter and receiver set with 18 beam axes and a 680 mm detection height. Maintenance and procurement teams choose genuine surplus or refurbished units of this model when a line needs body-protection guarding without waiting on OEM lead times. Autronexa verifies each set against OEM datasheet markings before it ships.

What This Type 4 Guard Set Delivers

The GL-R18L belongs to the Keyence GL-R series and is built for body protection, not finger or hand detection. Its ø45 mm detection capability and 40 mm beam spacing suit access guarding around robot cells, palletizers, and press areas where a person, not a fingertip, must be detected. The 720 mm total length and 680 mm detection height let it cover a defined opening without over-guarding the whole perimeter.

Optical synchronization or wire synchronization is set by wiring, so the set adapts to the cabinet layout you already have. Interference prevention supports up to 2 GL-R systems through a Channel A/B switch for optical sync, or automatically for wire sync. The infrared LED light source runs at 870 nm, and the effective aperture angle is max. ±2.5° when the operating distance is 3 m or more. Detection distance spans 0.2 to 15 m, and OSSD response time is max. 6.6 ms from ON to OFF.

Figure 1: Front view of the Keyence GL-R18L Transmitter + Receiver set showing its physical design and enclosure.

Electrical and Safety Ratings in Practice

The set runs on 24 VDC ±20% with ripple of 10% or less, Class 2. Two transistor OSSD outputs are PNP or NPN depending on cable type, with a maximum load of 500 mA. Current draw with the indicator on is max. 52 mA for the transmitter and max. 73 mA for the receiver, excluding OSSD output current. A supplemental AUX, error, or muting-lamp output is available for non-safety signalling at up to 50 mA.

Safety ratings cover IEC61496-1/-2 Type 4 ESPE/AOPD, IEC61508 SIL3, IEC62061 SIL CL3, and EN ISO13849-1 Category 4 PLe, plus UL508 and UL1998. The housing uses an aluminum main unit with Nylon (GF 30%) upper and lower cases and a polycarbonate and SUS304 front cover. Protection rating is IP65/IP67, and the operating range is -10 to +55 °C with 15 to 85 % RH, no condensation.

Figure 2: Technical layout and connection details for the Keyence GL-R18L Transmitter + Receiver set.

Surplus Advantage for This Guard Set

A Type 4 light curtain is a safety device, so buyers rightly ask about authenticity. Autronexa supplies genuine surplus and refurbished units, and each set is tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch. That matters more than a low price on an unverified clone.

Keyence lists this model as active, last verified 2026-09, so refurbished supply is a practical bridge when a spare is needed before a new-build order arrives. Surplus and refurbished, ready to ship, with condition stated up front. Contact Autronexa with your part number for verified condition and current availability.

Comparing This unit with Other Guard Options

Option Detection Typical fit
unit (this set) ø45 mm, 18 beams Body protection at 680 mm height
Finger-detection curtains Smaller capability Precision point-of-operation guarding
Safety mats and bumpers Contact-based Floor-level presence detection
Single-beam sensors One beam Simple entry detection only

Match the detection capability to the hazard distance your risk assessment sets. A body-protection curtain is not a substitute for a finger-detection device at a small opening.

📄 Download Datasheet: GL-R18L-datasheet.pdf

Frequently asked questions

Is this a genuine Keyence GL-R18L set, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it is listed. The set is supplied as genuine surplus or refurbished, not as a grey-market copy.

What condition will the GL-R18L arrive in?

The site default condition is Refurbished. Each transmitter and receiver is tested against OEM datasheet specifications and functionally verified by our sourcing team, and the condition is confirmed with you before dispatch.

How fast can you ship the GL-R18L?

Contact Autronexa for the current lead time on this set. Stocked surplus and refurbished units are ready to ship once condition and availability are confirmed against your order.

Does the GL-R18L need a communication module?

No. The datasheet lists no built-in ports, protocols, or communication expansion. Synchronization is optical or wired, determined by the wiring you use, and interference prevention supports up to 2 GL-R systems.

Is the GL-R18L still in production at Keyence?

Yes. Keyence production status is listed as active, last verified 2026-09. Confirm current lifecycle status and availability with Autronexa before ordering.

Related & compatible parts

Keyence

GL-R04L

Genuine surplus Keyence GL-R04L Type 4 light curtain set — 4 beams, 120 mm detection height, verified and…

In Stock

Keyence

GL-R10L

Genuine surplus Keyence GL-R10L Type 4 light curtain set, 10 beams, 400 mm, verified condition and ready to…

In Stock

Keyence

EH-614A

Genuine surplus Keyence EH-614A ultra-thin shielded sensor head for ES series amplifiers — verified condition, practical lead times,…

In Stock

Keyence

AP-34K

Genuine surplus Keyence AP-34K compound pressure sensor — verified condition, tested against OEM specs, ready to ship.

In Stock

News & guides for Keyence

View all articles

Request a quote for this part

Part number: GL-R18L

We reply within one business day.

GL-R18L Quote reply within 1 business day