Lenze Servo Drives & Motors

Lenze E94AMHE0074

Drive axis module

Manufacturer: Lenze Part Number: E94AMHE0074

Genuine surplus Lenze E94AMHE0074 axis module for 9400 HighLine Multi Drive cabinets — 3 kW, CANopen on board, verified condition.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated motor power 3 kW nominal (ASM 4-pole, 400 V class)
Rated output current 8.8 A nominal at 4 kHz switching frequency
Max. output current 13.1 A maximum
Max. short-term output current 21 A maximum short-term
Overload factor 3
Rated DC-bus current 12.1 A nominal
Supply voltage DC 260 V -0 % … 775 V +0 % (DC-bus operation)
Built-in ports CANopen on board (HighLine); diagnostic interface (USB via E94AZCUS adapter)
Protection rating IP20 (EN 60529); NEMA 250 type 1
Dimensions (H×W×D) 350 mm (with 507 installation backplane) × 90 mm × 288 mm

Description

The Lenze E94AMHE0074 is a drive axis module in the Servo Drives 9400 HighLine Multi Drive family, rated 3 kW nominal for a 4-pole asynchronous motor in the 400 V class. It suits maintenance and procurement teams keeping DC-bus cabinet drives running when OEM lead times stretch. Autronexa supplies genuine surplus and refurbished units with verified condition.

What this module Does in a 9400 HighLine Cabinet

In the 9400 HighLine Multi Drive architecture, axis modules share a common DC bus inside the cabinet. This module delivers 8.8 A nominal output current at 4 kHz switching frequency, with 13.1 A maximum and 21 A maximum short-term. The overload factor of 3 supports short peaks. Rated DC-bus current is 12.1 A nominal, and power loss is 190 W. Supply voltage spans DC 260 V to 775 V, so the module fits DC-bus operation across the series range. CANopen is built in on the HighLine variant, and a diagnostic interface is available through the E94AZCUS USB adapter. Two extension slots accept E94AYC communication or extension modules, alongside one memory slot and one safety slot.

Figure 1: Front view of the Lenze E94AMHE0074 Drive axis module showing its physical design and enclosure.

Why Genuine Surplus Fits This Drive Module

Cabinet builders and maintenance teams often need one axis module, not a full drive lineup. OEM channels can mean waiting on a factory order while a line sits idle. Genuine surplus and refurbished stock changes that equation: tested against OEM datasheet specifications and functionally verified by our sourcing team, these units arrive with clear condition notes. This module is compact at 350 mm × 90 mm × 288 mm and 5.3 kg, so it slots into an existing 507 installation backplane without reworking the cabinet. For plants standardised on the 9400 family, a verified surplus module keeps spares coverage practical without paying new-from-OEM list pricing.

Figure 2: Technical layout and connection details for the Lenze E94AMHE0074 Drive axis module.

Environmental Limits and Sourcing Checks

Operating temperature runs from -10 °C to +55 °C under EN 60721-3-3 class 3K3, with rated output current derated by 2.5 %/°C above +45 °C. Site altitude is up to 4000 m AMSL, derated 5 % per 1000 m above 1000 m. The module carries IP20 protection per EN 60529 and NEMA 250 type 1.

Before ordering, confirm the exact model and revision match, and decide between surplus and refurbished condition. Ask for the condition grading in writing. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the Lenze E94AMHE0074 a genuine Lenze module or a clone?

Autronexa verifies each E94AMHE0074 against OEM datasheet markings and part-number cross-reference before it enters stock. Units are genuine Lenze surplus or refurbished modules, not grey-market copies.

What condition will the E94AMHE0074 arrive in?

The E94AMHE0074 is supplied as refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask Autronexa for the written condition grading on the specific unit before purchase.

How fast can Autronexa ship the E94AMHE0074?

Lead time depends on current stock, so contact Autronexa with the E94AMHE0074 part number for verified condition and current availability. Surplus and refurbished units are ready to ship once condition is confirmed.

Does the E94AMHE0074 support CANopen communication?

Yes. The Lenze E94AMHE0074 has CANopen built in on the HighLine variant, plus a diagnostic interface via the E94AZCUS USB adapter. Two extension slots accept E94AYC communication or extension modules.

Related & compatible parts

Lenze

E82CV302K4C

Genuine surplus Lenze E82CV302K4C 8200 vector inverter with cold-plate cooling, 3.0 kW rating and 7.3 A output —…

In Stock

Lenze

EPM-S404

Genuine surplus Lenze EPM-S404 analog input module with four RTD channels, 16-bit resolution, and verified condition from Autronexa.

In Stock

Lenze

E82CV251K2C

Genuine surplus Lenze E82CV251K2C cold-plate inverter: 0.25 kW, 1.7 A, IP20. Verified condition and practical sourcing support from…

In Stock

Lenze

E82CV402K2C

Genuine surplus Lenze E82CV402K2C cold-plate inverter, 4.0 kW, verified and ready to ship from Autronexa.

In Stock

News & guides for Lenze

View all articles

Request a quote for this part

Part number: E94AMHE0074

We reply within one business day.

E94AMHE0074 Quote reply within 1 business day