SICK I/O & Function Modules

SICK DL100-11AA2110

Racking Velocity: 15 m/s

Manufacturer: SICK Part Number: DL100-11AA2110

Genuine surplus SICK DL100-11AA2110 laser distance sensor with 60 m range, EtherNet/IP dual-port and 15 m/s tracking for ASRS positioning.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Measuring Range 0.15 m ... 60 m (on Diamond Grade reflective tape)
Measurement Principle Phase Shift Optical Time-of-Flight Laser Distance Measurement
Light Source Visible red laser diode, 658 nm, Class 2 (IEC 60825-1:2014)
Measurement Accuracy Typ. ± 2 mm ... ± 3 mm
Repeatability 0.5 mm ... 1 mm (Typ. 0.5 mm at 1 σ)
Maximum Tracking Velocity 15 m/s
Maximum Acceleration 15 m/s²
Communication Interface EtherNet/IP (Dual-port 100 Mbit/s, DLR supported)
Supply Voltage DC 18 V ... 30 V
Enclosure Protection Rating IP65 (EN 60529)

Description

The SICK DL100-11AA2110 is a Dx100-series optical time-of-flight laser distance sensor for long-range positioning on Diamond Grade reflective tape, reaching 0.15 m to 60 m with EtherNet/IP dual-port communication. Maintenance and procurement teams choose genuine surplus or refurbished units of this model to keep automated storage and retrieval systems running without waiting on OEM lead times. Public datasheet parameters are limited for this configuration — our sourcing team can provide verified specs on request.

Product Overview

The DL100-11AA2110 belongs to the SICK Dx100 DL100 Standard family and uses phase-shift optical time-of-flight measurement. A visible red laser diode at 658 nm, Class 2 per IEC 60825-1:2014, projects onto Diamond Grade reflective tape to deliver a measuring range of 0.15 m to 60 m. Typical measurement accuracy is ±2 mm to ±3 mm, with repeatability of 0.5 mm to 1 mm at 1 σ. The output time is ≥1 ms, so the sensor supports continuous internal measurement at a 1 ms rate, subject to the fieldbus cycle. These values make the unit practical for moving targets in automated storage and retrieval systems, where maximum tracking velocity reaches 15 m/s and maximum acceleration reaches 15 m/s².

Figure 1: Front view of the SICK DL100-11AA2110 Racking Velocity: 15 m/s showing its physical design and enclosure.

Surplus Advantage

For a sensor tied to a specific ASRS aisle, the difference between a genuine unit and a lookalike often shows up in repeatability and protocol behaviour. Autronexa supplies genuine surplus and refurbished unit units that are tested against OEM datasheet specifications and functionally verified by our sourcing team. Because this model is a regularly requested Dx100 variant, surplus stock can shorten the gap between a failed sensor and a running aisle compared with ordering new from the OEM. Each unit is checked for the EtherNet/IP dual-port interface, the M12 connections and the laser class markings before dispatch. Contact Autronexa with your part number for verified condition and current availability.

Figure 2: Technical layout and connection details for the SICK DL100-11AA2110 Racking Velocity: 15 m/s.

Technical Specs Breakdown

The EtherNet/IP interface uses a dual-port 100 Mbit/s design with DLR support, which suits ring topologies in conveyor and racking controls. Power is supplied through a male M12 4-pin connector, while Ethernet uses two female M12 4-pin D-coded SPEEDCON connectors. The housing is aluminum die-cast with an acrylic glass (PMMA) optical window, rated IP65 per EN 60529, and the device weighs approximately 800 g. Operating ambient temperature spans -20 °C to +55 °C, with storage from -40 °C to +75 °C. Continuous condition monitoring tracks signal level attenuation, laser diode aging and temperature, giving maintenance teams early warning before positioning drifts.

Selection & Sourcing Guide

Before ordering, confirm the exact model and revision, the required connector set and whether your application needs the DLR ring option. Ask for the condition grade — surplus versus refurbished — and request the verification record. Autronexa can cross-reference the part number against the Dx100 family and confirm accessory compatibility. Integration Note: wiring into an EtherNet/IP network may require an external gateway or connection module — confirm required cables and gateways with your supplier.

📄 Download Datasheet: DL100-11AA2110-datasheet.pdf

Frequently asked questions

Is this a genuine SICK DL100-11AA2110, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it is listed. The DL100-11AA2110 carries the SICK Dx100 series identification and Class 2 laser marking.

What condition will the DL100-11AA2110 arrive in?

Units are supplied as genuine surplus or refurbished stock. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the condition grade of current stock.

How fast can you ship the DL100-11AA2110?

Lead time depends on current surplus stock. Contact Autronexa with your part number for verified condition and current availability.

Does the DL100-11AA2110 work with EtherNet/IP controls?

Yes. The sensor provides an EtherNet/IP fieldbus interface with dual-port 100 Mbit/s and DLR support, plus two push-pull digital outputs and a multifunctional input. Confirm cable and gateway requirements with your supplier.

Is the DL100-11AA2110 still supported by SICK?

Lifecycle status is not stated in the available data. Contact Autronexa to verify OEM support status and availability before ordering.

Related & compatible parts

SICK

DT50-N2123

Genuine surplus SICK DT50-N2123 distance sensor with 1x NPN output, 13 m range, and Class 1 laser—verified and…

In Stock

SICK

CLV650-6120

Genuine SICK CLV650-6120 fixed mount barcode scanner with Ethernet, oscillating mirror, and 125–1,570 mm reading distance. Verified surplus…

In Stock

SICK

DL100-11AA2102

Genuine surplus SICK DL100-11AA2102 laser distance sensor for racking systems, offering 15 m/s tracking and PROFIBUS DP for…

In Stock

SICK

DOL-1208-G20MAC1

Genuine SICK DOL-1208-G20MAC1: 20 m shielded PUR cable, M12 8-pin female to flying leads, IP67. Verified surplus stock…

In Stock

News & guides for SICK

View all articles

Request a quote for this part

Part number: DL100-11AA2110

We reply within one business day.

DL100-11AA2110 Quote reply within 1 business day